Check a VIN

2007 Peterbilt 386 recalls

There are 8 safety recalls on record for the 2007 Peterbilt 386, covering 31,784 vehicles in total across all the models in each campaign. Newest first.

All recalls

Equipment: other: labelsReported November 25, 2013 · 561 vehicles affected
What is wrong
Paccar Incorporated (Paccar) is recalling certain 2004-2013 Peterbilt 379, 357, 378, 367, 388, 365, 389, 385 and 386 trucks manufactured from April 3, 2003, through October 25, 2013 and equipped with tri-drive rear axles and a tag or pusher axle. The affected vehicles may be missing required information from the certification label, specifically the tag or pusher axle the gross axle weight rating, suitable tire and rim information, and recommended tire pressure information. Without this information, the vehicles do not comply with the requirements of 49 C.F.R. Part 567, "Certification."
Risk
As a result, the axles may be overloaded or the wrong tires could be installed or the tires could be improperly inflated. All of these issues increase the risk of a crash.
Remedy
Peterbilt will notify owners and dealers will inspect and replace the certification labels missing the necessary information. The recall is expected to begin in January 2014. Customers can contact Peterbilt at 1‑940‑591‑4000. Peterbilt's number for this campaign is 1113-F.

Recall number 13V593000 · Recall details

Fuel system, other: storage: tank assemblyReported February 23, 2011 · 4,664 vehicles affected
What is wrong
Paccar is recalling certain model year 2008-2012 kenworth t2000, t660, t700, t800, and w900, as well as model year 2009-2012 peterbilt 365, 367, 384, 386, 387, 388, 389, and 587 trucks equipped with paccar mx engines. The oil module centrifugal spinner filter cap in the paccar mx engine may become loose, possibly allowing the cap to come off and engine oil to partially discharge from the oil module onto exhaust components.
Risk
The discharge of engine oil onto exhaust components which are hot, such as when the engine is under significant load, may cause a fire.
Remedy
Dealers will re-torque the oil module filter cap and install a secondary retention device on the secondary centrifugal spinner filter cap. This service will be performed free of charge. The safety recall is expected to begin during march 2011. Owners may contact kenworth at 1‑425‑828‑5440 and peterbilt at 1‑940‑591‑4196.

Recall number 11V127000 · Recall details

Power train: axle assemblyReported December 13, 2010 · 12,873 vehicles affected
What is wrong
Paccar is recalling certain model year 2007-2008 kenworth and peterbilt vehicles manufactured from february 2, 2006 through april 30, 2007. The bearing surfaces of the extended lube universal joint that attaches the inter-axle driveline to the drive axle may become prematurely worn due to breakdown of lubrication and/or excessive heat. Prematurely worn bearing surfaces may result in the u-joint becoming loose and/or binding. This condition may result in universal joint failure, allowing the inter-axle driveline to detach from the axle.
Risk
Detachment of the driveline from the axle may cause the vehicle to lose power and become disabled in the roadway. Also, the driveline could drop from the vehicle into the roadway increasing the risk of a crash.
Remedy
Paccar is working with its supplier to remedy the vehicles free of charge. The safety recall is expected to begin during february 2011. Owners may contact kenworth at 425‑828‑5440 and peterbilt at 940‑591‑4196.

Recall number 10V634000 · Recall details

Trailer hitchesReported March 10, 2008 · 318 vehicles affected
What is wrong
Paccar is recalling 318 my 2007-2009 kenworth t800, w900, and peterbilt 357, 365, 367, 378, 379, 384, 385, 386,388, and 389 trucks equipped with premier trailer hitch assemblies. The pintle hitch assemblies may have been manufactured in a manner resulting in a reduction of fatigue strength of the pivot pins.
Risk
This reduction of fatigue strength could cause the pivot pin to crack and eventually break, causing the trailer to detach from the truck while in motion, which could cause a crash that could result in personal injury or death.
Remedy
Dealers will replace the potentially defective pivot pin free of charge. The recall began on april 18, 2008. Owners may contact kenworth at 1‑425‑828‑5440 or peterbilt at 1‑940‑591‑4196.

Recall number 08V104000 · Recall details

Trailer hitchesReported June 26, 2007 · 9,571 vehicles affected
What is wrong
On certain trucks, the removable tow hitch ,when used to tow or lift a vehicle, can fail due to defective material in the tow hitch.
Risk
If the tow hitch assembly fails while a vehicle is being towed or lifted, it may cause an accident that could result in personal injury or death.
Remedy
Dealers will replace the tow pin assembly free of charge. The recall began on september 4, 2007. Owners may contact kenworth at 425‑828‑5440 or peterbilt at 940‑591‑4201.

Recall number 07V269000 · Recall details

Fuel system, gasoline: deliveryReported April 10, 2007 · 306 vehicles affected
What is wrong
On certain trucks, if the ignition switch is turned on prior to initial start up in the manufacturing plant or during the filter replacement in the field, a small flame will ignite when the fuel is added to prime the system.
Risk
The possibility exists for the flame to spread resulting in possible equipment damage or physical injury.
Remedy
Dealers will inspect the filter for the date codes of the suspect filters and replace those heating elements free of charge. The recall began on march 21, 2007. Owners may contact kenworth at 425‑828‑5440 and peterbilt at 940‑591‑4201.

Recall number 07V153000 · Recall details

Power train: axle assemblyReported March 22, 2007 · 245 vehicles affected
What is wrong
On certain trucks, the axle housings may have been manufactured with steel that was out of specification which could result in a fatigue failure over time.
Risk
If a fatigue failure occurs and is left unattended, the axle may lock up or the end of the axle could come off, which may result in a vehicle crash.
Remedy
Dealers will inspect and replace the axles free of charge. The recall began on may 9, 2007. Owners may contact kenworth at 425‑828‑5440 and peterbilt at 1‑940‑591‑4196.

Recall number 07V132000 · Recall details

SuspensionReported December 21, 2006 · 3,246 vehicles affected
What is wrong
On some peterbilt trucks, certain parts used in the air suspensions have a high copper content causing premature failure.
Risk
Failure could cause erratic vehicle handling which can cause a vehicle crash without warning.
Remedy
Dealers will inspect and, when necessary, replace the defective parts. The recall began on january 17, 2007. Owners may contact peterbilt at 1‑940‑591‑4196.

Recall number 06V490000 · Recall details

Questions about the 2007 Peterbilt 386 recalls

How do I check if my 2007 Peterbilt 386 has an open recall?

Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.

Do I have to pay for a recall repair?

No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.

How many recalls does the 2007 Peterbilt 386 have?

8, covering equipment, fuel system, other and power train.

VIN decoder

See the problems and recalls for an exact car

Buying a used 2007 Peterbilt 386?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history