1999 Peterbilt 387 recalls

There are 7 safety recalls on record for the 1999 Peterbilt 387, covering 15,081 vehicles in total across all the models in each campaign. Newest first.

All recalls

Suspension: front: hubReported April 1, 2003 · 154 vehicles affected

What is wrong: On certain trucks equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's ff98x series non-drive steer axles, the hub unit bearings can wear prematurely.
Risk: Seizure of the bearings can cause wheel separation or wheel end fire.
Remedy: Dealers will replace all front axle hubs. Notification began july 16, 2003. The manufacturer has advised us that parts will not be available until september 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy with a reasonable time should contact peterbilt at 940‑591‑4201 or kenworth 425‑828‑5440.

Recall number 03V125000 · Recall details

Steering: linkages: tie rod assemblyReported July 15, 2002 · 4,513 vehicles affected

What is wrong: Heavy duty trucks equipped with trw tie rod ends on certain arvinmeritor and dana axles. Peterbilt will recall 1,434 vehicles equipped with arvinmeritor axles manufactured from december 11, 1999, to may 14, 2000, and from july 22 to september 30, 2000. Kenworth will recall 859 vehicles equipped with arvinmeritor vehicles manufactured from december 11, 1999, to may 23, 2000, and from july 27, 2000, to september 30, 2000 and kennworth will recall an additional 4,151 vehicles equipped with dana axles and manufactured from june 23 to december 6, 1999, and from may 23 to september 30, 2000. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Risk: This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Remedy: Dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began july 15, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1‑940‑591‑4201 or kenworth at 1‑425‑828‑5440.

Recall number 02V037003 · Recall details

Steering: linkages: tie rod assemblyReported August 28, 2001 · 2,294 vehicles affected

What is wrong: Vehicle description: heavy duty trucks equipped with trw tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Risk: This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Remedy: Dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began october 24, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1‑940‑591‑4000 or kenworth at 1‑425‑828‑5000.

Recall number 01V140006 · Recall details

Electrical system: wiringReported April 13, 2001 · 1,449 vehicles affected

What is wrong: Vehicle description: heavy duty trucks. These vehicles are equipped with peterbilt's smartgage system containing a reduced function interface module (rfim). This module receives data from various components/systems on the vehicle then sends the information to a microprocessor. A manufacturing defect in the rfim's can allow water to penetrate into the pressure block portion of the module, causing an electrical short in the pressure transducer connector.
Risk: This results in an erroneous air pressure reading on the gauge in the dash.
Remedy: The rfim date code will be inspected and all rfim's built prior to september 9, 2000 will be replaced. Owner notification began june 13, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1‑940‑591‑4000.

Recall number 01V131000 · Recall details

Steering: linkages: tie rod assemblyReported March 1, 2001 · 6,392 vehicles affected

What is wrong: Vehicle description: heavy duty trucks equipped with tie rod assemblies manufactured by trw. The suspect tie rods contain 24-dl model ball sockets. Certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which can lead to premature wear of the socket.
Risk: If this condition occurs, the driver can lose partial control of the right front wheel, possibly resulting in a crash.
Remedy: Dealers will replace the defective ball sockets and/or drag links. Owner notification began on april 10, 2001, to kenworth owners and on april 25, 2001, to peterbilt owners. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1‑425‑828‑5000, peterbilt at 1‑940‑591‑4000 or trw customer service at 1‑866‑280‑3287.

Recall number 01V044005 · Recall details

Fuel system, gasoline: storage: tank assembly: mountingReported July 6, 2000 · 154 vehicles affected

What is wrong: Vehicle description: heavy duty trucks. The side fairing hinge bar and mounts can detach from the fuel tank straps. The hinge bar can rotate and separate from the fairing, allowing the hinge bar assembly to fall off of the vehicle.
Risk: This could cause a road hazard, increasing the risk of a crash.
Remedy: Dealers will install an additional nut plate and if the bracket is cracked, the fuel tank strap will be replaced with a new strap and bracket assembly.

Recall number 00V185000 · Recall details

Service brakes, hydraulic: pedals and linkagesReported January 19, 2000 · 125 vehicles affected

What is wrong: Vehicle description: heavy duty trucks. There is an interference between the throttle pedal and the brake pedal.
Risk: The brake pedal may not operate as intended, resulting in greater brake pedal effort and/or delayed brake release.
Remedy: Dealers will replace the throttle pedal bracket.

Recall number 00V017000 · Recall details

Questions about the 1999 Peterbilt 387 recalls

How do I check if my 1999 Peterbilt 387 has an open recall?

Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.

Do I have to pay for a recall repair?

No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.

How many recalls does the 1999 Peterbilt 387 have?

7, covering suspension, steering and electrical system.

VIN decoder

See the problems and recalls for an exact car

Buying a used 1999 Peterbilt 387?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history