The worst 2008 Pierce Lance problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
Recalls 5
Equipment
- What is wrong
- Pierce Manufacturing Inc. (Pierce) is recalling certain model year 2000-2009 Enforcer and model year 2000-2010 Dash, Lance, and Arrow XT vehicles. While raising or lowering the cab as part of vehicle maintenance, the mounts on which the cab tilt cylinders pivot may fatigue and fail allowing the cab to fall until the safety catch activates.
- Risk
- If a person is in the path of the moving cab when a mount fails, the person may be hit by the falling cab, increasing the risk of injury.
- Remedy
- Pierce will notify owners, and dealers will affix new safety signs advising the operator to stay clear of the cab while it is being tilted, free of charge. The recall began on January 6, 2014. Owners may contact Pierce at 1‑920‑832‑3000. Pierce's recall number is 74B240.
Recall number 13V525000 · Recall details
Vehicle speed control: accelerator pedal
- What is wrong
- Pierce is recalling certain model year 1999-2008 arrow xt, dash, lance, and enforcer fire apparatus manufactured from june 22, 1999, through may 12, 2008, and equipped with an electronic accelerator pedal. After repeated use with excessive force, the accelerator pedal arm may bend and cause the pedal to move closer to the floor. If the pedal arm bends far enough, the pedal may contact the cab floor without warning and stick in the full throttle position.
- Risk
- If the accelerator pedal becomes stuck, the operator may lose control of the vehicle increasing the risk of a crash.
- Remedy
- Dealers will remove the existing accelerator arm and install a redesigned pedal arm free of charge. The safety recall is expected to begin on or about may 9, 2011. Owners may contact pierce at 1‑920‑832‑3000.
Recall number 11V255000 · Recall details
Steering
- What is wrong
- Pierce is recalling certain model year 1998 through 2008 arrow xt, lance, velocity, enforcer, impel, and dash custom fire apparatus vehicles manufactured from may 30, 1998 through november 25, 2008. The steering gear bracket may fracture and break. If this occurs the steering gear may detach from the vehicle.
- Risk
- Detachment of the steering gear will result in a loss of steering control that could cause a crash.
- Remedy
- Pierce will notify owners and dealers will install a new steering gear mounting bracket free of charge. The safety recall began on october 12, 2010. Owners are being instructed to inspect the steering gear bracket prior to each trip. The remedy to repair this defect is expected to begin no earlier the january 31, 2011. Owners may contact pierce at 1‑888‑974‑3723.
Recall number 10V423000 · Recall details
Structure: body: bumpers
- What is wrong
- Pierce is recalling certain model year 2003 through 2009 custom contender, dash, enforcer, impel, lance saber, and velocity fire trucks manufactured from february 20, 2003, through march 27, 2009. These trucks may be equipped with drop-down fire hose trays mounted under the front bumper. The hose tray latch may accidentally open while the vehicle is in motion.
- Risk
- If this occurs the fire hose may drop to the roadway without warning. Potential injury to people and property may occur. The sudden hose deployment may also distract drivers trying to avoid the hose and a crash may occur.
- Remedy
- A new and improved latch design has been developed and a new hose box incorporating the new latch will be installed free of charge. The safety recall began on october 4, 2010. Owner may contact pierce at 1‑920‑832‑3000.
Recall number 10V300000 · Recall details
Engine and engine cooling
- What is wrong
- Pierce is recalling certain model year 2006 through 2010 arrow xt, dash, lance, quantum, and velocity emergency vehicles manufactured from december 20, 2006, through february 1, 2010, equipped with detroit diesel series 60 engines. The engine may shut down unexpectedly when a diesel particulate filter over temperature condition is detected.
- Risk
- Unexpected emergency vehicle engine shutdown under certain conditions could hamper rescue operations and place the public at risk.
- Remedy
- Owners will be notified by detroit diesel and detroit diesel will repair the vehicles free of charge by reprogramming the engine control logic to illuminate a malfunction indicator light without requesting engine shutdown. Please see daimler trucks' defect report 10e-005. The safety recall began on may 28, 2010. Owners may contact daimler trucks at 1‑800‑547‑0712 or pierce at 1‑920‑832‑3000.
Recall number 10V195000 · Recall details
See all 5 recalls for the 2008 Pierce Lance
Defect investigations
Williams Controls Accelerator Pedals
On April 26, 2011, Pierce Manufacturing, Inc. (Pierce) notified the federal safety agency that it had decided certain Pierce fire trucks, manufactured between June 22, 1999, and May 12, 2008, contain a safety related defect. Pierce stated that certain model year 1999 through 2008 Arrow XT, Dash, Lance, and Enforcer vehicles contain a Williams Controls, Inc. (Williams Controls) suspended electronic accelerator pedal that may become bent after repeated use with excessive force. If the pedal arm bends far enough, the pedal may contact the cab floor without warning and stick in the full throttle position. If the accelerator pedal becomes stuck, the operator may lose control of the vehicle increasing the risk of a crash. This issue was assigned recall number 11V‑255.On May 12, 2011, RMD mailed an information request (IR) letter to Williams Controls requesting a list of customers who purchased the same or similar defective accelerator pedals.Williams Controls responded to RMD's IR letter on June 9, 2011 with a list those companies who purchased the same accelerator pedal.The list was submitted to the federal safety agency's Office of the Chief Counsel under a request for confidentiality.Williams Controls' response letter outlined several key points.First, it was noted that these pedals, item number 131507, are generic parts that are purchased by engineering staffs in accordance with their own specifications.According to Williams Controls, Pierce modified their purchased pedals post-purchase and this modification reduced the strength of the accelerator pedal assembly.Also, Williams Controls stated that it has, never had a warranty claim or other notice, other than by Pierce on their modified pedal, due to lever arm permanent deformation for item number 131507.While Williams Controls submitted a list of companies that purchased item number 131507, it noted that it did not sell the same or similar defective pedal assemblies to any company as the subject pedals were modified by Pierce.This Equipment Query is satisfied as, because of modifications not conducted by the pedal manufacturer, the same or similar pedals were not sold to other vehicle manufacturers and no other vehicles should be affected.However, RMD will continue to monitor recall activity to see if any similar issues are found in other manufacturers' vehicles.This EQ is closed.
EQ11003
Technical service bulletins for the 2008 Pierce Lance 30
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- All Roto Rays, Division of Eastern Fire Equipment Services, are warranted to the purchaser for 3 years...
- All Roto Rays are warranted to the purchaser for twenty-four months from the date of service against...
- Pierce has updated our inverter installation policy to require a sub-feed breaker box with inverters that...
- Pierce is communicating a material change to the ball joint boots used in applicable service kit PN 2742031
- This bulletin provides a procedure to update Telematics Control Unit (TCU) devices in Pierce custom...
- This bulletin provides a procedure for comprehensive update of the Command Zone (CZ) Telematics Control...
- This bulletin provides a procedure to update webpage and MQTT certificates in the Telematics Control Unit...
- The steering column clockspring airbag (Pierce PN 1799451) has become obsolete and will require...
- The previous bolt-in airbag and steering wheel design are now obsolete and will require replacement if the...
- Husky XP pressure transducer troubleshooting procedure for transducer-related performance concerns.
Compare the 2008 Pierce Lance
Other model years
Questions about the 2008 Pierce Lance
Is the 2008 Pierce Lance reliable?
Owners have filed 0 complaints about the 2008 Pierce Lance.
What is the most common problem with the 2008 Pierce Lance?
There are not enough complaints to tell.
How many recalls does the 2008 Pierce Lance have?
5 recalls, covering equipment, vehicle speed control and steering.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2008 Pierce Lance?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history