Pierce Lance recalls
There are 14 safety recalls on record for the Pierce Lance, covering 23,882 vehicles in total across all the models in each campaign. Newest first.
Pierce Lance recalls by model year
2010 22009 32008 52007 72006 62005 62004 82003 82002 72001 62000 71999 51998 31997 11996 11995 11993 11992 11991 11990 1
All recalls
Suspension: front: control arm: lower ball joint
- What is wrong
- Pierce Manufacturing (Pierce) is recalling certain model year 2006-2007 Arrow XT, Dash, Enforcer, Lance, Impel, and Quantum vehicles manufactured January 1, 2006, to March 31, 2007. In the affected vehicles, tears in the ball joint protective boots may result in contamination of the ball joints.
- Risk
- The contamination may cause premature ball joint failure and the wheel to disengage from the control arm, increasing the risk of a vehicle crash.
- Remedy
- Pierce will notify owners, and dealers will inspect the affected vehicles for torn ball joint boots. Pierce will also evaluate the ball joint wear. Ball joints with an unexpected level of wear will be replaced. These repairs will be performed free of charge. The recall began on December 10, 2015. Owners may contact Pierce customer service at 1‑888‑974‑3723. Pierce's number for this recall is 74B267.
Recall number 15V615000 · Recall details
Equipment
- What is wrong
- Pierce Manufacturing Inc. (Pierce) is recalling certain model year 2000-2009 Enforcer and model year 2000-2010 Dash, Lance, and Arrow XT vehicles. While raising or lowering the cab as part of vehicle maintenance, the mounts on which the cab tilt cylinders pivot may fatigue and fail allowing the cab to fall until the safety catch activates.
- Risk
- If a person is in the path of the moving cab when a mount fails, the person may be hit by the falling cab, increasing the risk of injury.
- Remedy
- Pierce will notify owners, and dealers will affix new safety signs advising the operator to stay clear of the cab while it is being tilted, free of charge. The recall began on January 6, 2014. Owners may contact Pierce at 1‑920‑832‑3000. Pierce's recall number is 74B240.
Recall number 13V525000 · Recall details
Fuel system, other
- What is wrong
- Pierce has decided that certain model year 1995-2008 arrow xt, dash, custom contender, lance, enforcer, pierce arrow, quantum, saber and commercial fire trucks manufactured from january 2, 1995, through january 21, 2008, contain a safety defect. These vehicles are equipped with fuel tank straps that may corrode due to winter road salt or liquid de-icing chemicals. If the fuel tank straps corrode sufficiently, the fuel tank supporting straps may fracture and the fuel tank may fall from the vehicle.
- Risk
- The vehicles may lose power and stall. In addition, the fuel tank may rupture and spill diesel fuel on the roadway. Either of these outcomes may cause a fire truck or surrounding vehicles to slip or slide on the roadway surface, increasing the risk of a crash.
- Remedy
- For fire trucks that are less than 10 years old, dealers will inspect the fuel tank straps and replace them if necessary with stainless steel straps free of charge. For vehicles that are older than 10 years, pierce is not offering a free remedy, but will offer for purchase replacement fuel tanks straps and provide instructions for installation. The safety recall began on august 27, 2011. Owners may contact pierce at 1‑920‑832‑3000.
Recall number 11V384000 · Recall details
Vehicle speed control: accelerator pedal
- What is wrong
- Pierce is recalling certain model year 1999-2008 arrow xt, dash, lance, and enforcer fire apparatus manufactured from june 22, 1999, through may 12, 2008, and equipped with an electronic accelerator pedal. After repeated use with excessive force, the accelerator pedal arm may bend and cause the pedal to move closer to the floor. If the pedal arm bends far enough, the pedal may contact the cab floor without warning and stick in the full throttle position.
- Risk
- If the accelerator pedal becomes stuck, the operator may lose control of the vehicle increasing the risk of a crash.
- Remedy
- Dealers will remove the existing accelerator arm and install a redesigned pedal arm free of charge. The safety recall is expected to begin on or about may 9, 2011. Owners may contact pierce at 1‑920‑832‑3000.
Recall number 11V255000 · Recall details
Steering
- What is wrong
- Pierce is recalling certain model year 1998 through 2008 arrow xt, lance, velocity, enforcer, impel, and dash custom fire apparatus vehicles manufactured from may 30, 1998 through november 25, 2008. The steering gear bracket may fracture and break. If this occurs the steering gear may detach from the vehicle.
- Risk
- Detachment of the steering gear will result in a loss of steering control that could cause a crash.
- Remedy
- Pierce will notify owners and dealers will install a new steering gear mounting bracket free of charge. The safety recall began on october 12, 2010. Owners are being instructed to inspect the steering gear bracket prior to each trip. The remedy to repair this defect is expected to begin no earlier the january 31, 2011. Owners may contact pierce at 1‑888‑974‑3723.
Recall number 10V423000 · Recall details
Structure: body: bumpers
- What is wrong
- Pierce is recalling certain model year 2003 through 2009 custom contender, dash, enforcer, impel, lance saber, and velocity fire trucks manufactured from february 20, 2003, through march 27, 2009. These trucks may be equipped with drop-down fire hose trays mounted under the front bumper. The hose tray latch may accidentally open while the vehicle is in motion.
- Risk
- If this occurs the fire hose may drop to the roadway without warning. Potential injury to people and property may occur. The sudden hose deployment may also distract drivers trying to avoid the hose and a crash may occur.
- Remedy
- A new and improved latch design has been developed and a new hose box incorporating the new latch will be installed free of charge. The safety recall began on october 4, 2010. Owner may contact pierce at 1‑920‑832‑3000.
Recall number 10V300000 · Recall details
Engine and engine cooling
- What is wrong
- Pierce is recalling certain model year 2006 through 2010 arrow xt, dash, lance, quantum, and velocity emergency vehicles manufactured from december 20, 2006, through february 1, 2010, equipped with detroit diesel series 60 engines. The engine may shut down unexpectedly when a diesel particulate filter over temperature condition is detected.
- Risk
- Unexpected emergency vehicle engine shutdown under certain conditions could hamper rescue operations and place the public at risk.
- Remedy
- Owners will be notified by detroit diesel and detroit diesel will repair the vehicles free of charge by reprogramming the engine control logic to illuminate a malfunction indicator light without requesting engine shutdown. Please see daimler trucks' defect report 10e-005. The safety recall began on may 28, 2010. Owners may contact daimler trucks at 1‑800‑547‑0712 or pierce at 1‑920‑832‑3000.
Recall number 10V195000 · Recall details
Steering: gear box: shaft pitman
- What is wrong
- On certain fire trucks equipped with trw steering gears, models tas85 and rcs85, these steering gears contain potentially defective sector shafts with an incorrect gear tooth which may interfere with the rack-piston teeth, resulting in a stick or bind condition.
- Risk
- This condition has the potential to cause the steering gear to stall and restrict the steering turning angle of the vehicle which could result in a vehicle crash.
- Remedy
- Pierce is working with trw to replace the defective steering gear (please see 07e101). The recall began on january 11, 2008. Owners ontact trw at 765‑429‑1768 or pierce at 920‑832‑3249.
Recall number 08V020000 · Recall details
Service brakes, air: supply: hoses, lines/piping, and fittings
- What is wrong
- On certain fire trucks, interference may occur between the aerial front axle interlock sensor bracket and the front air brake hose. This condition occurs during full turn steering and full suspension jounce compression.
- Risk
- This interference may cause chafing leading to a potential front air brake hose failure. In the event of a front brake hose failure, loss of front braking will occur, increasing the risk of a crash.
- Remedy
- Dealers will remove the existing front axle interlock sensor bracket and install a new bracket in a new location avoiding the front axle brake hose. The recall began on october 13, 2005. Owners may contact pierce at 920‑832‑3249.
Recall number 05V355000 · Recall details
Seats
- What is wrong
- Certain fire trucks with command cabs fail to comply with the requirements of federal motor vehicle safety standard no. 207,"seating systems." the rescue body offerings do not meet the pull test requirements. The pedestal seat was mounted by drilling and tapping the cab or body floor.
- Risk
- In the event of a crash, the pedestal seat fasteners could fail to restrain the seat, increasing the risk of injury to the seat occupant.
- Remedy
- Dealers will inspect the seat pedestals. If the seat was mounted with tapped fasteners, the fasteners will be removed and a hole will be drilled to replace the mounting fasteners with 7/16" bolts and nuts. The recall began on august 19, 2005. Owners may contact pierce at 920‑832‑3249.
Recall number 05V351000 · Recall details
Suspension
- What is wrong
- Certain fire trucks equipped with holland/neway air suspension systems, a transverse beam castings may fracture under normal loads. If a casting breaks when the vehicle is traveling on a roadway there is the potential for pieces of the casting to become projectiles and the suspension?s transverse beam may drop down low enough to contact the road surface.
- Risk
- This will cause sparks that could potentially ignite and cause a fire.
- Remedy
- Holland is handling the owner notification and remedy for this campaign. Dealers will inspect and replace the defective transverse beam assemblies free of charge. Owners may contact holland at 616‑396‑6501 or pierce at 1‑888‑974‑3723.
Recall number 05V220000 · Recall details
Seats
- What is wrong
- Certain fire trucks fail to comply with the requirements of federal motor vehicle safety standard no. 207, 'seating systems.' the seat tether restrains the seat during pull testing as the suspension components are not designed to restrain the seat on their own. The suspension seat tethers are too long.
- Risk
- The occupant will experience insufficient suspension seat restraint which could lead to personal injury or death in the event of a crash.
- Remedy
- Dealers will replace suspension seat tethers with shorter tethers. The recall began on april 11, 2005. Owners may contact pierce at 1‑888‑974‑3723.
Recall number 05V072000 · Recall details
Steering: linkages: tie rod assembly
- What is wrong
- On some heavy duty class 8 vehicles equipped with arvinmeritor axle assemblies which may have been manufactured with trw model 20edl ball sockets, the tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket in some applications.
- Risk
- If this condition occurs, the driver can lose steering control, possibly resulting in a vehicle crash.
- Remedy
- Dealers will replace the ball socket assemblies. Owner notification began october 25, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact pierce at 920‑832‑3000.
Recall number 02V037007 · Recall details
Steering: gear box (other than rack and pinion)
- What is wrong
- The steering gear bracket used to mount the power steering gear to the chassis frame can crack and fail.
- Risk
- This can cause the steering gear to bind, resulting in a loss of steering control and a possible accident.
- Remedy
- Dealers will inspect vehicles and replace the brackets with newly designed brackets. Until replacement brackets are available, owners are advised to inspect the brackets for cracks, and contact pierce manufacturing for repair information.
Recall number 94V083000 · Recall details
Questions about the Pierce Lance recalls
How do I check if my Pierce Lance has an open recall?
Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.
Do I have to pay for a recall repair?
No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.
How many recalls does the Pierce Lance have?
14, covering suspension, equipment and fuel system, other.
VIN decoder
See the problems and recalls for an exact car
Buying a used Pierce Lance?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history