Abs failed while I was driving. When I pushed on the brakes it felt like I was hititng a rock . Took forever to stop. Van is currently at mechanics. They said egular brakes fine will notify me monday what problem is with ABS.
1992 Plymouth Grand Voyager brakes complaints
Page 2 of 3: complaints 11 to 40 of 53, newest first, as owners wrote them.
They repainted the hood for me if I was willing to pay half and now it is doing the same thing all over again but worst. The wood paneling on the sides is just peeling away and the car looks like crap on the outside but is still running good due to all the money we put into it. The brakes have been fixed twice for a faulty switch and relay switch due to the ABS brake system. I was out driving just this past week and without warning I lost my brakes and I am suffering from ms so I had a great deal of diffulty stopping the vehcile with one foot I had to use two feet and prayed a lot just to get back home.
I would like to know more about the recalls for the above vehicle and what exactly they cover and don't cover and I go about getting them fixed. My car is now in the shop for failure of brakes. While I was out driving the brakes suddenly went on me
Abs pump failed while driving. Pump ran on and off. Dealer was sorry, nothing could be done about it.
My 1992 plymouth grand voyager minivan has experienced recurring failure of the anti-lock braking system. The brake system warning light and ABS warning light both illuminated. On occasion the system resumed operation if the vehicle was turned off or not driven for 2 or more hours. In march of 2003 a local garage diagnosed the ABS relay was not providing power to the ABS pump. The relay was replaced - cost $100. Days later the system failed again. The pump would only operate if connected to direct battery voltage to start it running. In late april the ABS pump was replaced by another local garage cost over $500. The system operated another 3 weeks, and then failed again, completely failing during in mid-june. The van was towed to the same garage. The technician identified that the ABS relay coil had failed. The van is un-drivable because the ABS pump also supplies power brake pressure. The van was towed to chris leith dodge in wake forest, nc on july 3, 2003 and inspected. On july 11, 2003 the service department let me know that they needed the district manager to make determination of recall warranty repair of the system. July 15, 2003, the service manager and district manager determined that the part the technician identified as malfunctioning (hydraulic assembly r-4683398) was not a part of recall 96v‑099 # 685. The ABS pump is part of the recall and was to be warranted for life. The recall also states that repairs done earlier to this part were to be reimbursed as a part of this recall. I await information on how long it will take to obtain and install repair parts. The repair estimate is $999.84. The van was purchased used for $1800. Repairs are nearing that value. According to complaints and the engineering evaluation this is a recurring problem. I know the van is not new, but at least it can be safe, or the public should be warned not to keep these vehicles in operation if chrysler will not honor the terms and spirit of the recall.
That the ABS brake light illuminated on the dashboard, and all braking ability was lost. A diagnostic test was performed twice and it was discovered the braking system was defective. The ABS control modular, and accumulator needed to be replaced.
Abs light illuminated while traveling. Consumer heard a pumping noise when depressing brakes. Brakes had low pressure when depressed. Dealer had repaired once, but problem returned. Please provide further information.
Abs pump continually operates and normal braking pressure is now soft. Same as recalled problem, but this van's VIN is not included in the recall!
When applying brakes ABS brake light illuminates on dashboard, and pedal becomes extremely hard and resistful, causing total brake failure. Please give any further details.
Abs light stayed lit on dashboard. When brakes were applied for hard braking wheels locked up, and vehicle slid, meaning that ABS failed to operate properly. A private mechanic and dealership had given different reasons that might cause this to occur. Manufacturer informed consumer that recall 96v099000 repairs had previously been done. Please provide any additional information/attachments.
Brake booster sensor is malfunctioning. Brake acts like vehicle is skidding all the time at any speed. Abs light comes on and goes off. Mechanic at the repair shop says brakes pedal will freeze if not repaired. Dealer followed up by doing a diagnostic testing. Sensor has a problem and needs replacement. Consumer will be responsible for coverage.
Vehicle has been repaired under recall 96v099000/ ABS brake system failure. However, defect continues to exist. Please provide any additional information/attachments.
While attempting to have recall 96v‑099 for ABS the dealer determined that the ABS pump and motor did not need to be replaced, they performed a diagnostic test on the ABS modulator and determined that the controller anti lock brake needed replacing, consumer feels that since this is apart of the ABS system and that it should be covered under recall 96v‑099. Nlm
The anitlock brake and parking brake light came on during a regular speed. Took to dealer on 8/25/2000, problem happened to be the booster pump that was in recall in 1996. On 9/15/00 the same thing happened and took vehicle to dealer to check, have not heard what problem is yet. Mileage at 1st incident was 74827, 2nd incident it is 75744 (less than 1000 miles and 3 weeks later).
No summary listed for above vehicle.
While driving at any speed consumer would step on brake pedal to reduce speed or stop vehicle, but brakes won't respond. Consumer will have to step harder on brakes to stop.
We purchased our mini van in november 1996 and had the first transmission failure less than 2 months later and had the same problem "repaired" 3 times more in the 3 years we have owned it. In april 1996, a recall was issued for the ABS of this make/model/year. When we purchased it, the dealership did not tell us this nor did chrysler corp. We found out after our ABS failed when driving. Luckily we were not involved in an accident. It then failed again 6 months after they "fixed" the ABS in february 2000. They will not do the repair now for under $1600--we don't think we should be paying anything! I believe we may have been part of a consumer fraud from the dealership as they told us of no recalls at the time of purchase when there were several issued on this particular year and model. We want chrysler to refund our purchase price and cost of repairs over the past three years. We drive around with our 5 children in the car and cannot risk another ABS failure. The asst to the ceo at daimler chrysler was of no help stating, "we don't make our vehicles to inconvenience you." when it is more than being "inconvenienced" it is about the safety of our family and other people on the road at the same time we are. Any help you can give us is much appreciated as we will not give up until something is done to remedy this situation. Thank you.
Transmission malfunctioned. Yh
Consumer contacted dealer in reference to recall number 96v099000, manufacturer and dealer stated vehicle was not included in the recall although consumer having the same type of problems as stated in the recall . Please provide any further details.
Anti lock brake system failed.consumer didn't know it was on recall at the time of purchase(96v‑099). Yh
Anti lock brake system failed, consumer didn't know it was on recall at the time of purchase (96v‑099). Yh
Vehicle is experiencing problem with auto transmission/ front bearing failure, causing oil leakages at 58,000. Also, and ABS sensor light came on and remained on. Seeking help from the federal safety agency in this matter. Dealer / mfr. Was not contacted at this time*ak.
Had taken vehicle in for recall repairs while under a hundred thousand miles. Mechanic found nothing wrong. Contacted manufacturer and received a copy of recall. Was offered a 50/50 split for one set of brakes and owner pays for labor.
1st ABS power wire melted, 2nd lost ABS as dealer serviced vchicle
Antilock came on and driver had no braking force at all. Dealer replaced an ABS relay to fix, but I don't understand why there was no braking force at all.
Recall 96v099000: chrysler/brakes; hydraulic: anti-skid system: dealership is charging $192.00 for the wheel speed sensor. Consumer states that this is part of the ABS system, which is covered in the warranty for 10 years. Problem still exists. *ak
This is the 3rd time in 4 years that the ABS system on this vehicle has failed. A claim was filed with daimler/chrysler on march 11, 1999. On april 2, 1999 I was contacted by customer service representatives of daimler/chrysler notifiying me that my claim was being denied due to expiration of warranty. I believe that this is wrong and would like to take it to another level of customer service.
This is the 3rd time in 3 years that this system has failed and has needed to to be replaced in some form. This defect has been the subject of numberous complaints and recalls. It is my hope that chrysler will stand behind this product and reimburse me for the cost of repair.
While driving braking system malfunctioned, causing extended stopping distance, and sometimes no brakes at all, which may cause an accident. Also, problems with transmission. Please provide further information.
Master brake cylinder keeps leaking all the fluid, causing the brakes to fade, and when filled back up the fluid leaks out again. Dealer has not been contacted.
VIN decoder
See the problems and recalls for an exact car
Buying a used 1992 Plymouth Grand Voyager?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history