In 2005 while entering onto the highway going home from some personal appointments a small car hit our full size van from behind and caused us to flip over and roll over 8 times and slide at least 2 city blocks before it stopped. We were not even doing the speed limit when we were hit. The front window shattered and glass was in our eyes but our airbags did not deploy. We were stuck upside down my seat belt was stuck and my husband had to pull me out of the driver side window. I had to treat for tmj problems, stress and trauma in my neck and back for a few years and I still have some issues. Do we have a claim against the manufacturer?
Plymouth Grand Voyager seat belt problems
40 of the 2,395 owner complaints about the Plymouth Grand Voyager describe seat belt won't latch or retract, most of them for the 1992 model year.
- owner complaints
- 40
- worst model year
- 1992
By model year
Often reported together
No deployment 2Wipers 1Slipping 1Headlights 1Coil spring 1ABS 1
What owners say
Tl*the contact owns a 1993 plymouth grand voyager. The contact stated that the liftgate hinge was not operating correctly. The liftgate closed without assistance. The vehicle was taken to an independent mechanic and repaired. Also, the ABS warning light illuminated intermittently on the instrument panel. The contact applied pressure to the brake pedal and experienced difficulty slowing down. There was also a malfunction with the seat belt assembly buckle. Recently, while driving approximately 65 MPH in the rain, the windshield wipers stopped working without warning. The vehicle was taken to an independent mechanic on three separate occasions. The technician advised that the vehicle be taken to an authorized dealer. At this time, the vehicle has not been repaired. The failure mileage was 142,000 and current mileage was 155,000. Update 10/01/08 *cw the set belt would not retract. Updated 10/03/08.
The drivers side seat belt buckle became unfastened while driving. There was a recall for this problem ( recall no.#97v148000 seat belt system ) but the vehicle identification number was not apart of the recall. The manufacturer was aware of the problem. *jb
Consumer states that rear seat belt buckle , second row, is not working properly. Dealer has not yet been notified.
Front seat belt retractor locked on passenger side - checked to see if it was jammed - no it's just locked in a close position.
The child seat failure consisted of a cable connecting the latch plate to the belt tensioner mechanism. The failure is not faile "safe". A failure safe mode would maintain the seat belt and child restrained. The failure mode instead leaves the belt loose. This leaves parents with a false sense of security since they believe their child is safely restrained. This is also an expensive repair since chrysler designed the integrated child seats contained in the bench to be unmaintainable requiring parents to purchase the complete bench in excess of $600. Nlm
Seat belt retractor on driver's side would not retract or release intermittently. Dealer notified. Feel free to provide any further information.
The child seat failure we experienced can easily go undetected. The cable connecting the latch plate to the seat belt retractor mechanism has broken which prevents the seat belt from tensioning and restraining our child. I f the driver does not have detailed understanding of how the seat belt should work the driver will be lulled into a false sense of security. When chrysler was contacted they offered to pay for half of the repair. I believe this is a design flaw that should be repaired by the manufacturer. I have owned reliable child seats which have endured for many years, all of which were far less expensive and none with such a silent and dangerous defect. I would appreciate your assistance and believe that this matter should be pursued for the benefit of the other unknowing drivers.
The seatbelt will rewind mechanism is locked and will not permit the seatbelt to extend. In this state a seatbelt is required. It is also a major safety feature that could prevent serious injury or death. Additionally, the seatbelt mechanism is not accessible by any apparent means without causing damage to the interior of the vehicle.
I was involved in an accident on the date given. The other party involved pulled out in front of me. I hit her at about 45 MPH. The main impact was around the location of my left headlight, driver's side and front. My airbag did not deploy, my seatbelt did not lock and restrain me and my back seat collapsed upon impact. Chrysler has sent an engineer to look at the van and I still have not heard back from them. The estimate is still not complete by stan's auto body and the total is already close to $5000. I had to seek medical treatment due to the safety features not performing. I was diagnosed as having a concussion, a contusion and a minor neck injury.as of today I have had a severve headache and some memory loss since the accident.
Related recalls
Seat belts: front: anchorage
- What is wrong
- Vehicle description: passenger mini-vans. The center rear seat, right outboard side, safety belt anchor hook can become unattached from the body anchor position.
- Risk
- In the event of a vehicle crash, the occupant may not be properly restrained increasing the risk of personal injury.
- Remedy
- Dealers will replace the anchor hook retaining clip with a revised profile clip and a cover plate.
Recall number 97V149000 · Recall details
Seat belts: front: buckle assembly
- What is wrong
- Vehicle description: passenger mini-vans. Covers on the solid stalk mounted seat belt buckles can become dislodged causing the release button to stick inside the cover. The buckle would then be only partially latched.
- Risk
- In the event of a vehicle crash, the occupant may not be properly restrained increasing the risk of personal injury.
- Remedy
- Dealers will install a cover retaining clip to the stalk mounted buckle cover to prevent dislocation of the buckle cover.
Recall number 97V148000 · Recall details
Seat belts: integrated child seat
- What is wrong
- The bolts which secure the integrated child seat modules to the seat frame can break.
- Risk
- In the event of a vehicle accident, the child seat may not provide adequate protection to the occupant.
- Remedy
- Dealers will replace the integrated child seat module bolts.
Recall number 96V136000 · Recall details
Questions about the Plymouth Grand Voyager seat belt
Which Plymouth Grand Voyager years have seat belt won't latch or retract problems?
The model years with the most reports are 1992 (12 complaints), 1993 (12 complaints) and 1991 (6 complaints).
VIN decoder
See the problems and recalls for an exact car
Buying a used Plymouth Grand Voyager?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history