Changing the gear to Drive while car is already in Drive is the normal way to put the car on cruise control at highway speeds. This should not be permitted when car is under a certain speed. However, it appears you can turn on cruise control when the car is at 0 mph. When car is already in Drive and at a stop (0 mph), shifting gear changer into drive again, and letting foot off brake and lightly tapping the gas pedals causes car to suddenly lurch forward in a highly disproportional manner to any light pressure applied to the gas pedal. Car then continues to increase speed from 0 mph at an alarming rate as if cruise control is on. This is extremely unsafe. One can accidentally shift the gear into drive more than once while at 0mph, and cause the car to unexpectedly lunge forward into someone or something. Moreover, the current gear is not clearly displayed at any time in a large enough font. The gear indicator is only displayed in tiny font on a small screen atop the steering column, and the gear indicator can be easily blocked by the spoke of the steering wheel when wheel is turned. At no time is the current gear indicator displayed on the larger head unit. Furthermore, there is no audible chime or indication that gear has been switched like in other cars. Without the chime, one can easily put the gear into to Drive twice, entering this dangerous condition where car can lurch forward as if cruise control is suddenly on.
2025 Polestar 3 driver assistance complaints
Page 2 of 2: complaints 11 to 20 of 20, newest first, as owners wrote them.
When parking the car and putting the car in reverse, the cameras are activated and two views are displayed simultaneously on the head unit: 1) a 360 view is displayed; and 2) rear camera view is displayed. However when putting the car in Drive and then back in Reverse again, only the 360 view displays but NOT the Rear view camera. Subsequently drive / reverse sequences during a parking maneuver do not cause the rear camera to display again, The only way to turn the rear camera back on is to keep the car in reverse and then fiddle with the head unit to tap the appropriate button sequences to turn the rear camera back on. This is not safe.
Activation and persistence of the rearview camera. This situation occurs when selecting reverse, drive and then reverse again in short order (i.e. parallel parking, maneuvering to get into our garage with a narrow driveway and tight turn). When I initially select Reverse, the center display shows both the 360 view and the reverse camera - perfect. When I select Drive to move forward a couple of feet and realign the car, the display switches to show just the 360 view - makes sense. When I then put it back into Reverse to continue parking, the rear view camera does not come back on and only the 360 view is visible. Based on my reading of the regulations, if the car is in reverse, the rear view camera should be active and show on the screen. This is a significant safety issue and one that Polestar claims is not and that their software is operating as designed.
On a curvy, 2-lane road, moderate traffic both ways, my vehicle performed unnecessary emergency braking for on oncoming vehicle while negotiating an “S” curve. There was no vehicle in my lane in front of me, the oncoming vehicle was squarely in its lane, I was in my lane, both of us had several cars following behind. But we had both just passed the apex of our respective curves and were approaching each other in the “middle” of the “S”. All warning lights flashed, my car applied emergency braking, and vehicle behind me took evasive action to the right shoulder in order to avoid a rear collision.
Lane Keeping and Lane Departure: Lane Departure warnings cannot be disabled, but steering interventions also cannot be disabled, contrary to manual’s instructions and control panel button. With feature turned “off”, vehicle still intervenes and self-steers. Car has steered back toward potholes and bicyclists that I was trying to avoid. I could have destroyed a wheel in the 1st case or killed somebody in the second case.
- Vehicle displays are unresponsive and stay off or black, the display shows key indicators like speed & turn signals. Because the vehicle has no physical buttons you cannot control heat, cannot use backup cameras.
There are several issues with this vehicles, but here are the two most glaring safety issues: 1.) Emergency Braking System - on two occasions this was activated with no actual emergency. The first was simply turning left at an intersection. I was ~10ft away from the car in front of me and keeping the same speed or less than that car. The emergency braking was activated and the vehicle came to an almost full stop. The vehicle behind me nearly hit me. There was no reason for this to be activated and nearly caused an accident rather than prevented one. Check out the owner forums - this is happening frequently to multiple owners. [XXX] 2.) The software frequently shows malfunction in critical systems such as suspension and drivetrain which then will randomly disappear with a restart of the car or system. Again there are many stories of this in the owner forums. The most recent fault for us showed a suspension malfunction that then disappeared once it got to the dealer. These random phantom warnings are a safety hazard as drivers may become complacent and begin ignoring them. When a real malfunction happens it could be ignored to catastrophic results. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
According to the federal safety agency documentation, "REQUIREMENT: The rear visibility system must default to the rearview image meeting the requirements of S5.5.1 and S5.5.2 (S6.2.1 and S6.2.2) at the beginning of each backing event regardless of any modification to the field of view the driver has previously selected." The Polestar 3 does show the rearview camera upon initially entering reverse, but if the car is placed in drive and then placed back into reverse, only the top-down "bird-eye" view is displayed. The driver must manually configure the camera to show the rear view again. This would appear to be a violation of this requirement.
The rear view parking camera software is defective. If you put the car into reverse, the rear parking camera view comes up (as intended). However, if you put the car into drive and then back into reverse (as if you are making some parking adjustments in a parking lot), the rear parking camera view does NOT come back up. In fact, it requires several additional touches on the car's infotainment touchscreen to bring the rear parking camera view back up.
The issue is with the displaying of the rear view camera. When I put the car in reverse the rear view camera displays on the bottom of the screen and the 360 view at the top of the screen as it should. But if I then put the car in drive (like when parallel parking) the display changes to show just the 360 view. Then when I put the car back in reverse only the 360 degree view is shown the reverse camera view is not displayed as required. The only way to get the reverse camera view to display is to tap the screen and click on the Rear view options to get the rear view to display. This is clearly a safety issue and not following federal regulations.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2025 Polestar 3?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history