2018 Porsche Panamera 4s Executive problems

What is wrong

Porsche Cars North America, Inc. (Porsche) is recalling certain 2017-2021 Panamera, Panamera 4, Panamera GTS and Panamera Turbo vehicles. Please see the recall report for a complete list of specific model names and model years. Humidity may enter the external coolant pump for the climate control system and cause an electrical short circuit.

Risk

An electrical short circuit increases the risk of a vehicle fire.

Remedy

Dealers will replace the external coolant pump and inspect and replace the plug-in connection, if necessary, free of charge. Interim owner notification letters informing owners of the safety risk were mailed March 6, 2023. Owners will receive a second notice once remedy becomes available, anticipated July 2023. Owners may contact Porsche's customer service at 1‑800‑767‑7243. Porsche's number for this recall is APA1.

Recall number 23V033000 · Recall details

What is wrong

Porsche Cars North America, Inc is recalling certain 2018 Panamera, Panamera 4, Panamera 4 E-Hybrid, Panamera 4 E-Hybrid Executive, Panamera 4 E- Hybrid Sport Turismo, Panamera 4S, Panamera Turbo, Panamera Turbo Executive, Panamera 4 Sport Turismo, Panamera Turbo S E-Hybrid Sport Turismo, vehicles. Incorrect soldering of a control unit may result in the intermittent failure of various systems, possible affecting vehicle driveability.

Risk

Impaired vehicle driveability can increase the risk of a crash.

Remedy

Porsche Cars North America will notify owners, and dealers will replace the affected control units, free of charge. The recall began May 17, 2019. Owners may contact Porsche's customer service at 1‑800‑767‑7243. Porsche's number for this recall is AKA5.

Recall number 19V180000 · Recall details

What is wrong

Porsche Cars North America, Inc. (Porsche) is recalling certain 2018 Panamera 4 Executive, Panamera 4S Sport Turismo, Panamera 4 Hybrid, Panamera 4 Hybrid Executive, Panamera 4 Hybrid Sport Turismo, Panamera Turbo Sport Turismo, Panamera Turbo S Hybrid Executive, Panamera Turbo S Hybrid, Panamera 4 Sport Turismo and Panamera Turbo S Hybrid Sport Turismo vehicles, 2017-2018 Panamera, Panamera 4, Panamera Turbo Executive, Panamera 4S, Panamera Turbo and Panamera 4S Executive vehicles and 2019 Cayenne S and Cayenne vehicles. The instrument cluster may not provide a visual warning when the brake pads are worn out. As a result, these vehicles fail to comply with Federal Motor Vehicle Safety Standard (FMVSS) number 135, "Light vehicle brake systems."

Risk

If the driver is not alerted when brake pads are worn out, the driver may lose control of the vehicle while attempting to brake, increasing the risk of crash.

Remedy

Porsche will notify owners, and dealers will update the instrument cluster software, free of charge. The recall began April 19, 2019. Owners may contact Porsche customer service at 1‑800‑767‑7243. Porsche's number for this recall is AKA1/AKA0.

Recall number 19V115000 · Recall details

What is wrong

Porsche Cars North America, Inc. (Porsche) is recalling certain 2017-2018 Panamera 4S, Panamera Turbo and Panamera Turbo Executive and 2018 Panamera Turbo S E-Hybrid, Panamera Turbo S E-Hybrid Executive, Panamera 4S Sport Turismo, Panamera Turbo Sport Turismo, Panamera Turbo S E-Hybrid Sport Turismo, and Panamera 4S Executive vehicles. The connecting links may detach from the rear-axle anti-roll bar potentially damaging the surrounding suspension parts and affecting the vehicle's handling.

Risk

An unexpected change to the vehicle's handling can increase the risk of a crash.

Remedy

Porsche will notify owners, and dealers will replace the connecting links for the anti-roll bar, free of charge. The recall began October 2, 2018. Owners may contact Porsche customer service at 1‑800‑767‑7243. Porsche's number for this recall is AJ06.

Recall number 18V388000 · Recall details

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

EA21002