Rosenbauer Avenger recalls
There are 6 safety recalls on record for the Rosenbauer Avenger, covering 2,240 vehicles in total across all the models in each campaign. Newest first.
Rosenbauer Avenger recalls by model year
All recalls
Electrical system: instrument cluster/panel
- What is wrong
- Rosenbauer America (Rosenbauer) is recalling certain 2019-2022 Avenger, 2019-2024 Commander, and Warrior fire trucks equipped with an Innovative Controls instrument panel. A software error may cause the odometer to freeze and not display accurate mileage.
- Risk
- An inaccurate odometer reading can unintentionally delay critical safety-related maintenance, potentially impairing the safe operation of the vehicle and increasing the risk of a crash.
- Remedy
- Dealers will replace the instrument panel, free of charge. Owner notification letters were mailed September 10, 2025. Owners may contact Rosenbauer customer service at 1‑651‑462‑1000.
Recall number 25V475000 · Recall details
Electrical system
- What is wrong
- Rosenbauer America is recalling certain 2020-2022 Avenger, 2017-2024 Commander, 2020-2024 Warrior, 2023 Commercial F-350, F-550, 108SD, and 2024 Commercial 114SD vehicles. In the event of a short circuit or wiring failure, the firmware may fail to shut off the output pin, resulting in overloaded electrical circuits.
- Risk
- Overloaded electrical circuits can overheat, increasing the risk of fire.
- Remedy
- Dealers will update the firmware, free of charge. Owner notification letters were mailed February 22, 2024. Owners may contact Rosenbauer America customer service at 1‑651‑462‑1000.
Recall number 23V894000 · Recall details
Equipment: mechanical: winch
- What is wrong
- Rosenbauer America (Rosenbauer) is recalling certain 2020-2022 Commercial F-550, 2022 Commercial M2-106, M2-112, Commercial 567, 2021 Commander, and Avenger vehicles equipped with certain Warn Industries VR EVO winches with a wireless handheld remote. Water may enter the handheld remote control for the winch and cause circuit board corrosion, which can allow the winch to operate unintentionally.
- Risk
- A winch that operates unintentionally increases the risk of injury.
- Remedy
- Rosenbauer will notify owners and provide instructions for inspecting the remote for corrosion, disabling the wireless function, and ordering a new wired remote if necessary, free of charge. Owner notification letters were mailed September 25, 2023. Owners may contact Rosenbauer customer service at 1‑651‑462‑1000.
Recall number 23V536000 · Recall details
Steering: rack and pinion
- What is wrong
- Rosenbauer America (Rosenbauer) is recalling certain 2021 Commander and Warrior vehicles equipped with Meritor 180 series drive pinions. The rear axle drive pinion may fracture.
- Risk
- A fractured drive pinion may contact the brake drop hose, and unintentionally engage the parking brake without detection, or without the brake lights activating, increasing the risk of a crash.
- Remedy
- Meritor will inspect and replace the drive pinion, as necessary, free of charge. Owner notification letters were mailed on April 27, 2022. Owners may contact Rosenbauer customer service at 1‑651‑462‑1000.
Recall number 22V025000 · Recall details
Fuel system, diesel: fuel injection system: fuel rail
- What is wrong
- Rosenbauer America (Rosenbauer) is recalling certain 2016-2021 Commander, Warrior, Avenger, and 2019 Commercial M2 106 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.
- Risk
- A fuel leak in the presence of an ignition source increases the risk of a fire.
- Remedy
- Dealers will inspect and replace the rail as necessary, free of charge. Interim owner notification letters were mailed on July 9, 2021. Owners may contact Rosenbauer customer service at 1‑651‑462‑1000.
Recall number 21V334000 · Recall details
Electrical system: instrument cluster/panel
- What is wrong
- Rosenbauer America (Rosenbauer) is recalling certain 2018-2021 Commander, 2020 Warrior, 2020-2021 Commercial, and 2020 Avenger vehicles equipped with Weldon V-Mux Vista IV Standard LCD displays used for controlling emergency vehicle lighting and HVAC functions. These displays may experience low voltage spikes and cause the LCD display to lock up or become nonfunctional, due to varying electrical installations.
- Risk
- If the LCD display becomes locked up or non-functional it can delay emergency efforts, which can increase the risk of injury.
- Remedy
- Rosenbauer will notify owners, and dealers will repair or replace the IV Standard LCD displays, free of charge. The recall March 3, 2021. Owners may contact Rosenbauer customer service at 1‑651‑462‑1000. Rosenbauer's number for this recall is 20E-078.
Recall number 20V779000 · Recall details
Questions about the Rosenbauer Avenger recalls
How do I check if my Rosenbauer Avenger has an open recall?
Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.
Do I have to pay for a recall repair?
No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.
How many recalls does the Rosenbauer Avenger have?
6, covering electrical system, equipment and steering.
VIN decoder
See the problems and recalls for an exact car
Buying a used Rosenbauer Avenger?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history