Check a VIN

1995 Spartan Gladiator problems

Typical yearClose to a typical year
Owner complaints
0
Recalls
3
Service bulletins
1

The worst 1995 Spartan Gladiator problems

Ranked by number of owner complaints. Mileage and cost come from what owners wrote.

Problems by type

Tap a problem to see which part fails, at what mileage and in which other years.

Recalls 3

Seat belts: front: anchorageReported May 12, 1999 · 1,753 vehicles affected
What is wrong
Vehicle description: fire trucks. These fire trucks are all 4-door models which contain dual, forward facing passenger seats. The hardware utilized to mount the seat box to the cab floor and to the backwall structure, and also to mount the type 1 seat belt systems, was inadequate to meet the requirements of fmvss nos. 207/210, ""seating systems" and "seat belt assembly anchorages."
Risk
The seat box mounting/restraining hardware can loosen or fail allowing the seat/seat box assembly to break free of its mounting to the cab floor and/or backwall which could cause injury to the occupants of those seats.
Remedy
Dealers will replace the seat box mounting fasteners.

Recall number 99V118000 · Recall details

StructureReported January 20, 1999 · 3,210 vehicles affected
What is wrong
Vehicle description: fire trucks. The cab tilt system contains a 12 volt electrical solenoid assembly as an accessory to the cab tilt electric motor/hydraulic pump assembly. Rain, snow, salt spray or other corrosive environment can corrode the solenoid or "bridge" the energizing coil wire terminal causing the cab tilt system to operate uncontrollably.
Risk
This could cause the cab tilt system to actuate without control, increasing the risk of personal injury.
Remedy
Dealers will install a hermetically sealed solenoid assembly.

Recall number 99V010000 · Recall details

SuspensionReported November 6, 1998 · 39 vehicles affected
What is wrong
Vehicle description: fire trucks. If the driver accelerates in a turn above 20 MPH forward speed, the lock pin is actuated and causes the axle to resist returning to the straight ahead position after the turn is completed because the lock pin is binding on the clamp plate surface.
Risk
Engaging the lock pin in the lcmp plate hole at high forward speeds causes excessive wear in the lock pin and/or the clamp plate hole. Lane changes and other vehicle maneuvers will greatly increase contact frequency and causes wear, increasing the risk of loss of vehicle control.
Remedy
Dealers will replace the tag axles on these fire trucks.

Recall number 98V286000 · Recall details

See all 3 recalls for the 1995 Spartan Gladiator

Technical service bulletins for the 1995 Spartan Gladiator 1

Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.

Used buying checklistWhat to check on a 1995 Spartan Gladiator before you buy

Compare the 1995 Spartan Gladiator

Other model years

199620142020

Questions about the 1995 Spartan Gladiator

Is the 1995 Spartan Gladiator reliable?

Owners have filed 0 complaints about the 1995 Spartan Gladiator.

What is the most common problem with the 1995 Spartan Gladiator?

There are not enough complaints to tell.

How many recalls does the 1995 Spartan Gladiator have?

3 recalls, covering seat belts, structure and suspension.

Share your experience with the 1995 Spartan Gladiator

Tell other buyers what went wrong and what it cost. We review every report before it appears, and we never publish names, emails or VINs.

No names, contact details or links. Reports about a dealer or a person are not published.

VIN decoder

See the problems and recalls for an exact car

Buying a used 1995 Spartan Gladiator?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history
Is this car on a recall?Check VIN