While driving, cruise control and check engine light comes on and then the car won't accelerate. Engine revs really high and when pushing accelerator pedal, car will not move. The check engine code states "throttle position sensor". This has happened more than 20 times
2005 Subaru Legacy acceleration problems
15 complaints (8% of all complaints for this car). Typical mileage when it fails: 89,600. 1 crash reported.
- owner complaints
- 15
- of this car's complaints
- 8%
- typical mileage
- 89,600
- crashes
- 1
- recalls
- 0
Which part fails
- Cruise control3
At what mileage
Complaints by mileage at the time of the problem.
Subaru Legacy acceleration problems in other years
Related recalls
No recalls on record for this model year.
What 2005 Subaru Legacy owners say
Most recent owner complaints, unedited.
Driving southbound on hwy 17 at 60mph 11/15/2020 engine suddenly went to idle. Throttle became unresponsive. Check engine light illuminated. I drifted to safety off the highway. Engine still idling, throttle unresponsive. After checking under the hood, I restarted the car and normal throttle response returned. I cautiously drove home and read the code for the cel: p2138 -- throttle position sensor voltage correlation. A quick search found others have solved this problem by changing throttle control to an updated version that uses hall effect method instead of a rheostat. I inquired with previous owner of this car and found it had happened once before.
Takata recall,was talking to dealership,but lights still indicate airbag ,cruz control , check engine light came on.was taken to dealership for repair and reset.but I don't think it was done. Other recalls on break line coating's not done , I lost break lines while driving,at three different times.subaru issued a second recall , with explicit attention to the area where the line connects to the break for rust.the dealer was to to replace any break lines showing damage in this area.this recall was taken in and again was not replaced . They coated maybe on top of the rust. I had the remaining break line replace asa percausetion measure ,all cost to me.seat belt not retracting , when released.,this was replaced twice .it still does it and the webbing I cought up in the door closesing. The rug hook drives side replace three times warning lights still on ,for cruzcontrol,does not functioning. I used it maybe 3 time's since l bought the car new.went through the first set of tires,cubbing do to warped rodtors in not even 700 miles.still doesn't stay in alinement.eats tires ,4sets by 67'00 miles.dash electric ,cd ,heat radio, security system defo all one computer panel, would wear battery dead over night. I had to plug it in to slow chargerthat shut down went battery was charged.untill a correct replacement ,unit could be found.took awhile, very limited legacy wagon. I have a brief case af picture s and work orders in plastic sleeves.when time for warranty was up , I had less then 20'000 miles on the car.subaru corporate,paid some of the serious fuel issue it had. I have not had a collision what does vehicle. I t has been maintainedregularl a peice of rubber trim was coming of the day l brought it home, I photoed this, it's first picture in my book.the dealership tryed glueing it on.it never stayed on . I should have been replaced as metal clip's in trimrustnowonfender.
Engine accelerated at a rapid speed on its own power.. Unable to stop the vehicle with the brakes. Vehicle was in motion in the parking lot..
While pressing the accelerator there was no response. The car continued at it's normal idle, but pressing on the gas gave no response. I was able to coast to a stop off the road and turn the car off and back on, which fixed the problem the first time. This has happened again two times as of today and it took several times turning the car off and back on to get use of the accelerator again. This seems like a safety issued, and of course a problem that could easily leave me and my kids stranded or injured in an accident if I were traveling at higher speeds when the problem occurs. I've read online that it seems to be a common problem with subaru. The code that I received was p2138 (throttle position sensor).
Tl* the contact owns a 2005 subaru legacy. While driving approximately 65 MPH, the vehicle independently accelerated. The contact had to shift into neutral and shut the vehicle off in order for it to resume normal operation. The failure recurred on numerous occasions. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The VIN was unavailable. The approximate failure mileage was 190,000.
Tl* the contact owns a 2005 subaru legacy. The contact stated that while traveling various speeds, the vehicle suddenly lost acceleration power. The vehicle was not diagnosed or repaired. The manufacturer was not contacted about the failure. The failure mileage was 110,000.
Tl* the contact owns a 2005 subaru legacy. The contact stated that while attempting to accelerate from a stop, the vehicle was slow to respond. The RPM gauge moved despite the accelerator pedal being depressed and the vehicle then stalled. The vehicle was independently diagnosed as having a throttle body sensor failure. The vehicle was not repaired. The manufacturer was not notified of the incident. The approximate failure mileage was 146,000.
I was driving on the highway, and the car seem to loose power, luckily I noticed it, as I was able to cost over to the side of the rode. I own a carmd, and attached it to my car, it gave me code p2138 which means the throttle position sensors (2 of them) not being in agreement. I think this is very dangerous as this can happen at any time while one is driving, potential leading to a accident or fatality.
Car has been very slow to reduce rpms when shifting gears or when stopped (and in neutral) for the past few weeks. Today, when pulling into a starbucks, the car surged forward. Luckily I have a stick shift and just pushed the clutch in. After surging, the check engine light came on. Using a diagnostic tool, I found that the car is throwing error code p2138. This indicates that the accelerator pedal position (app) sensor is either bad or has a poor connection. The detail on the error stats "the ECM has detected that the app sensor 1 and app sensor 2 disagree more than 4.5% for less than 1 second." essentially, one or both throttle-by-wire circuits isn't functioning properly. I went online and found that this is an all too common problem and some folks have found that their cars are surging forward, threatening safety.
Questions about the 2005 Subaru Legacy acceleration
Does the 2005 Subaru Legacy have acceleration problems?
Owners have filed 15 complaints about the acceleration of the 2005 Subaru Legacy, 8% of all its complaints.
At what mileage do 2005 Subaru Legacy acceleration problems start?
The typical (median) mileage in owner complaints is 89,600 miles.
Was there a recall on the 2005 Subaru Legacy acceleration?
There is no recall for this problem on this model year.
What year does the Subaru Legacy have the most acceleration problems?
The Subaru Legacy model years with the most acceleration complaints are 2006 (30 complaints), 2005 (15 complaints) and 2015 (14 complaints).
Other 2005 Subaru Legacy problems
Engine 33Brakes 31Fuel system 27Electrical 25Airbags 21Visibility 17Lights 14Transmission 13Suspension 7Seat belts 6Seats 6Tires 6Wheels 6Body 4Steering 3Driver assistance 2
VIN decoder
See the problems and recalls for an exact car
Buying a used 2005 Subaru Legacy?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history