Terex HR40 recalls

What is wrong

Terex South Dakota, Inc. (Terex) is recalling certain 2025 TL-Series, LT-Series, LTM40, HR40, HR46, and SCM55 areal device vehicles. The control valve may have been assembled with an incorrect plug, causing the hydraulic equipment to overheat.

Risk

Touching parts of the overheated hydraulic equipment can increase the risk of burn injuries.

Remedy

Dealers will inspect and repair the control valve as necessary, free of charge. Owner notification letters were mailed January 23, 2026. Owners may contact Terex's customer service at 1‑605‑882‑4000. Terex's number for this recall is SN735.

Recall number 26V006000 · Recall details

What is wrong

Terex South Dakota, Inc. (Terex) is recalling certain model year 2009-2013 LT38, LT40, LTM40, NT29, TL37, HR40, L13i, and TPL40 aerial devices manufactured on 2009-2013 Ford F-350, F-450, or F-550 Super Duty chassis with a 6.8L engine, and equipped with certain Muncie Power Products PTO Assemblies. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.

Risk

The leaking oil may soak into the thermal blanket covering the exhaust, which when combined with heat from exhaust, may result in an increased risk of fire.

Remedy

Terex will notify owners, and dealers will install a new pressure switch kit that moves the switch away from the exhaust system, free of charge. The recall began in September 15, 2014. Owners may contact Terex customer service at 1‑605‑882‑4000. Terex's number for this recall is SN611.

Recall number 14V371000 · Recall details

What is wrong

Terex is recalling certain model year 2000 and 2001 hr37m and hr40m utility trucks manufactured from november 2000 through december 2001. The aerial devices installed on these trucks may contain a lower boom lift cylinder with defective components. The material used to produce the cylinder rod ends was not to specifications.

Risk

The cylinder rod ends may crack causing the cylinder to disconnect while in use. Personal injury or death can occur to the user or to persons around the vehicle.

Remedy

Terex will notify owners, and dealers will inspect the cylinder rod ends for cracks. Dealers will also test the cylinder material for hardness. The safety recall began on august 30, 2011. Owners may contact terex utilities warranty department by calling 1‑605‑884‑3892 or email to [email protected].

Recall number 11V418000 · Recall details

What is wrong

Terex telelect, inc. Is recalling 192 my 1999 through 2001 hr37 and hr40 utility trucks manufactured from june 21, 1999 through january 30, 2001, which utilize hydraulic cylinder 437250d to lift the lower boom assembly. These units were built with rod eye material that was not to specification in the lift cylinder.

Risk

The rod eye material may fail and allow the boom and platform to fall, possibly resulting in serious injury or death to the operator or persons near the vehicle.

Remedy

Terex will notify owners and replace the lower boom lift cylinder free of charge. The safety recall began on may 29, 2009. Owners may contact terex utilities warranty department by calling 1‑605‑884‑3892.

Recall number 09V168000 · Recall details