"2011-2015 rogue and rogue select; reduced performance due to CVT fluid temperature protection logic if...

Bulletin number

NTB16-090

Component

Power train: automatic transmission

Summary

"2011-2015 rogue and rogue select; reduced performance due to CVT fluid temperature protection logic if you confirm the vehicle speed is, or was, reduced by the CVT fail-safe (reduced vehicle speed) after continuous operation under the following conditions: - high RPM and/or high speed driving (RPM of 4000+ or speeds of 65 MPH [104.6 km/h] for 1.0 – 1.5 hrs. Or more) - driving in ambient temperature of 96 degrees or higher - climbing steep or extended hills for 6 miles (9.6 km) or more - whine or rattle type noise occurring during reduced engine performance (vehicle speed decrease) note: before applying this bulletin, check for and repair any dtcs first. Action 1. Perform self-diagnosis with consult-iii plus (c-iii plus). - if dtcs are present, refer to the appropriate section of the electronic service manual (esm) and diagnose the dtcs first before proceeding to step 2 below. 2. Check the number of counts of ""CVT-a” with c-iii plus. - refer to the flow chart on page 2 and the service procedure starting on page 3 to confirm if this bulletin applies."

Owners of these vehicles have filed 894 complaints in the transmission category.