2019 QX50; IPDM E/R CONFIGURATION AFTER UNIT REPLACEMENT SERVICE INFORMATION When replacing the IPDM E/R,...
Infiniti technical service bulletin ITB18-038 for 2019 Infiniti QX50.
- Bulletin number
- ITB18-038
- Component
- Equipment
- Summary
- 2019 QX50; IPDM E/R CONFIGURATION AFTER UNIT REPLACEMENT SERVICE INFORMATION When replacing the IPDM E/R, for any reason, it must be configured to function properly. Use CONSULT-III plus (C-III plus) Re/programming, Configuration to write (configure) the correct Type ID into the IPDM E/R. For convenience, the configuration procedures (Read/Write and Manual) are provided in this bulletin with C-III plus screens. NOTE: - The vehicle will not start until IPDM E/R configuration is done. - The correct Type ID for configuration is based on vehicle options. - The part number externally marked on the IPDM E/R case is not the Type ID. - The Type ID can only be read through Re/programming, Configuration function of the C-III plus. - IPDM E/R configuration (Type ID) cannot be read through Work Support > ECU Identification. This will only show the part number that is marked on the outside of the case.
Vehicles covered
- Infiniti QX50 2019 2019
VIN decoder
See the problems and recalls for an exact car
Buying a used Infiniti QX50?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history