2018-2019 LEAF; REPLACING OR ALIGNING DISTANCE SENSOR (ICC SENSOR) BRACKET OR CHARGE PORT LID SERVICE...

Bulletin number

NTB18-086

Component

Forward collision avoidance

Summary

2018-2019 LEAF; REPLACING OR ALIGNING DISTANCE SENSOR (ICC SENSOR) BRACKET OR CHARGE PORT LID SERVICE INFORMATION If a distance sensor (ICC sensor) bracket is removed or replaced (see Figure 1 on the next page): - Take care when handling the distance sensor bracket. It can be damaged if dropped. - Do not bend the distance sensor bracket to adjust radar alignment. NOTE: If the distance sensor is difficult to align, confirm the bracket is not bent by comparing it to a known good vehicle. - Always perform an ICC Sensor Alignment (Radar Alignment Procedure) whenever the distance sensor bracket is removed or replaced. - To locate the Radar Alignment Procedure in the Electronic Service Manual (ESM), select the "Trouble Diagnosis" section and enter ICC Sensor Alignment into the Title Search field. If a charge port lid is removed or replaced: - Do not bend the charge port lid frame to adjust (Figure 2). - Do not bend any of the components attached to the charge port bracket (Figure 2). - To locate the Charge Port Lid Adjustment Specs and Procedure in the ESM, select the ?Inspection, Removal, and Installation? section and enter Charge Port Lid Assembly into the Title Search field. - Always perform an ICC Sensor Alignment (Radar Alignment Procedure) whenever any of the components called out in Figure 2 are removed or replaced. - To locate the Radar Alignment Procedure in the Electronic Service Manual (ESM), select the "Trouble Diagnosis" section and enter ICC Sensor Alignment into the Title Search field.

Owners of these vehicles have filed 27 complaints in the driver assistance category.