Flash: Powertrain Control Module (PCM) Updates

Bulletin number

18-103-19

Component

Power train

Summary

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Engine Control Module (ECM), also known as a PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs have been set: P013A-00 - O2 Sensor Slow Response Rich To Lean Bank 1 Sensor 2. P015A-00 - O2 Sensor Delayed Response Rich To Lean Bank 1 Sensor 1. P1CEA-00 - Boost Side EVAP Purge System Performance. P0096-00 - Intake Air Temperature Sensor 2 Circuit Range-Performance. P04DB-00 - Crankcase Ventilation System Disconnected. P024A-00 - Charge Air Cooler Bypass Control "A" Range/Performance. P2097-00 - Post Catalyst Fuel Trim System Rich. P2B2F-00 - Fan 1 Performance/Stuck Off. P24D6-00 - EVAP System Pressure Sensor/Switch "B" Circuit Range/Performance. P01BA-00 - Engine Oil Temperature Sensor "B" Range/Performance. P026E-00 - Charge Air Cooler Coolant Pump Performance. P164E-00 - A/C Clutch Relay Control Range/Performance. P0191-00 - Fuel Rail Pressure Sensor "A" Circuit Range/Performance. P2299-00 - Brake Pedal Position/Accelerator Pedal Position Incompatible. U1008-00 - LIN 1 BUS. Customers may experience one or more of the following:Not passing vehicle certification during state inspections if performed after a system reset. Driveability issues. Engine misfire when cold. In addition, the following improvements are also available:Turbo coolant pump after run duration and on-off strategy update, to improve turbo O-ring durability. Message ?S&S Not Available? will be changed to ?Hood Open?. Improved idle stability during tip in tip out. Improved idle stability during an Engine Start Stop (ESS) event.

Owners of these vehicles have filed 1 complaints in the transmission category.