Some customers may experience a TCS/DSC warning light and SCBS warning light (amber) illumination with DTC...
Mazda technical service bulletin 04-006-20-3707 for 2016-2019 Mazda MAZDA2.
- Bulletin number
- 04-006-20-3707
- Component
- Service brakes, hydraulic
- Summary
- Some customers may experience a TCS/DSC warning light and SCBS warning light (amber) illumination with DTC C0051:62 stored in PCM memory. DTC C0051:62 - EPS control module[when the vehicle is driven in a straight line, the difference between the steering angle (calculated by each sensor) and the steering angle (from the steering angle sensor) is greater than the specification]. This concern most likely occurs during the following situations: When the vehicle is turning in reverse, right after starting the engine. When the vehicle is going over a bump or a curb, right after starting the engine. This concern may be caused when the DSC HU/CM performs the steering center position calibration. During the learning process, if a shock is applied to the vehicle by a bump or curb etc., the steering center position may not be properly detected and creates a steering center position error. To eliminate this concern, the DSC HU/CM control software has been modified
Vehicles covered
- Mazda MAZDA2 2016-2019 2016201720182019
VIN decoder
See the problems and recalls for an exact car
Buying a used Mazda MAZDA2?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history