Unable to run basic settings within the Adaptive suspension control unit (J775)
Bentley technical service bulletin 2055693/2 for 2017-2021 Bentley Bentayga.
- Bulletin number
- 2055693/2
- Component
- Suspension
- Summary
- Unable to run basic settings within the Adaptive suspension control unit (J775). Customer statement/workshop findings: Unable to run Basic setting (full process + rebound end stops) after a new adaptive air suspension control unit has been fitted or work has been conducted on the suspension system which requires the Basic setting (full process + rebound end stops) procedure performing Technical background: Referring to Figure 1, During the Basic setting (full process + rebound end stops) the routine can stop during the initial part of the procedure, in particular at the stage shown in Figure 2, which is when the vehicle is raised to allow all four wheels to hang down to their full rebound position Should this issue be evident and the Basic settings routine does not continue - Refer to the Measure section of this TPI
Vehicles covered
VIN decoder
See the problems and recalls for an exact car
Buying a used Bentley Bentayga?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history