Check/Test Procedure 1. Remove left rear inner lamp unit (E3/17, Figure 1) and right rear inner lamp unit...
Mercedes-Benz technical service bulletin 2024060008 for 2024 Mercedes-Benz CLE 300 and 2024 Mercedes-Benz CLE 450.
- Bulletin number
- 2024060008
- Component
- Structure: body
- Summary
- Check/Test Procedure 1. Remove left rear inner lamp unit (E3/17, Figure 1) and right rear inner lamp unit (E4/17, Figure 1). For basic information, see AR82.10-P-4927WEC. 2. Remove the trim element (1, Figure 1) from the trunk lid (2, Figure 1). Installation: The trim element (1, Figure 1) is destroyed when you remove it and a new one has to be installed in its place. 3. Check the laser solder seam (area A, Figure 1) on the trunk lid (2, Figure 1) for cracks. Use a flashlight here to inspect for cracks. Work Procedure 1. Clean the affected area of the laser solder seam (area A, Figure 1) on the trunk lid (2, Figure 1) over a wide area. For example with silicone remover. 2. Apply activator to the affected area of the laser solder seam (area A, Figure 1) on the trunk lid (2, Figure 1). Observe manufacturer's specifications for product! 3. Seal the affected area of the laser solder seam (area A, Figure 1) on the trunk lid (2, Figure 1) with transparent seam seal. Seal approx. 2 cm over the entire crack length of the laser solder seam (area A, Figure 1). Observe manufacturer's specifications for product! 4. Install in the reverse order.
Vehicles covered
VIN decoder
See the problems and recalls for an exact car
Buying a used Mercedes-Benz CLE 300?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history