Step 1: Fish out two purple wires (Interior of bus) from the top of the curbside spinout and move them to...
Arboc technical service bulletin AR887 for 2023 Arboc Spirit of Freedom.
- Bulletin number
- AR887
- Component
- Electrical system
- Summary
- Step 1: Fish out two purple wires (Interior of bus) from the top of the curbside spinout and move them to the bottom front of the wheel well cover– best to use pull cord/tube to fish them through. These wires should be wrapped in a black protective “snakeskin” covering (see picture). Step 2: Locate the controller on the fire suppression extinguisher bottle and find the gray wire with the blunt cut end (see picture). Step 3: Strip this covering back to expose the red, white, and black wires (see picture). Step 4: Bend white wire back and tape off – it is not used (see picture). Step 5: Strip red and black wires and connect each one separately to a purple wire with butt connectors. It may be necessary to remove some of the extra purple wiring to provide the best fit within the harness. Step 6: When complete the wires should look like this (see picture). Step 7: If these instructions are followed correctly the engine shutdown will be in place (see schematic picture).
Vehicles covered
VIN decoder
See the problems and recalls for an exact car
Buying a used Arboc Spirit of Freedom?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history