Mp epb service brake message on the cluster and LED light on

Bulletin number

9100620

Component

Electrical system

Summary

MP EPB SERVICE BRAKE MESSAGE ON THE CLUSTER AND LED LIGHT ON If any of the following DTCs come as ACTIVE: C10ED-00 Electronic Park Brake Switch LED- C10CD-01 Electronic Park Brake Switch-General Electrical Failure 1. Confirm customer's concern 2. If the DTCs come as STORED, clear them prior to performing any service steps. If the DTCs come as ACTIVE 3. Check that the battery connectors are properly seated as well as the ground connector. 4. Try disconnecting the battery for 5min to reset the module. 5. If the issue with the EPB is still present and there are ACTIVE DTCs, check for any loose connection at the Park Brake Switch or Brake System Module BEFORE replacing the Switch. If after disconnecting the switch and the module, any DTC goes from ACTIVE to STORE, clear them and do not replace the switch. 6. If after following steps 1 to 5 the Park brake switch is not working, replace the switch. Note: If there is any other DTC are present, review Brake System Module BEFORE replacing the switch. C10EA-00 Left Park Brake Actuator- C10EC-00 Park Brak Actuator Correlation C10EB-00-RIGHT PARK BRAKE ACTUATOR

Owners of these vehicles have filed 34 complaints in the electrical category.