Not applicable to vehicles built for US market
Jeep technical service bulletin 08-145-26 REV. A for 2026 Jeep Compass.
- Bulletin number
- 08-145-26 REV. A
- Component
- Unknown or other
- Summary
- Not applicable to vehicles built for US market. Corner Radar Dynamic Alignment Calibration Issue IMPORTANT! The DTC listed below may set when the Radar Dynamic Alignment procedure is SYMPTOM: unsuccessful. The procedure should only be started when a radar is replaced or when bumpers are removed/reinstalled. Before performing the procedure, make sure the reported problem actually concerns the radars. If any Diagnostic Trouble Codes (DTCs) or conditions/symptoms different from those described below are detected, record them in the repair order and carry out the necessary actions before continuing with the additional instructions in this bulletin. Technicians must experience a malfunction of ADAS systems and the vehicle must exhibit/set the following DTC on one or more corner radars: ● B2EF9-78 - Alignment Of The Corner Radar Completed With Failure : Alignment Not Carried Out. Technicians will also experience the following: ● Unable to successfully perform the corner radar dynamic alignment procedure. This bulletin involves reprogramming the corner radars with the latest software then performing the Sensor/ Proximity Radar Calibration procedure
Vehicles covered
- Jeep Compass 2026 2026
VIN decoder
See the problems and recalls for an exact car
Buying a used Jeep Compass?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history