Check a VIN

2000 Utility VS2R problems

Typical yearClose to a typical year
Owner complaints
0
Recalls
2
Service bulletins
4

The worst 2000 Utility VS2R problems

Ranked by number of owner complaints. Mileage and cost come from what owners wrote.

Problems by type

Tap a problem to see which part fails, at what mileage and in which other years.

Recalls 2

Service brakes, air: antilock: ABS warning lightReported October 7, 2003 · 307 vehicles affected
What is wrong
On certain trailers equipped with bendix ec-30t electronic control units (ecu). If the trailer-mounted ABS warning lamp circuit experiences an electrical short and the short is not repaired, the high side power switch inside the ecu that controls the illumination of the trailer-mounted ABS warning lamp may eventually become thermally stressed and experience an electrical short.
Risk
If the power switch shorts, it can result in an over-current condition in the ecu and lead to excessive heat, smoke, and possible fire.
Remedy
Bendix will provide a remedy kit and detailed instructions and also provide a labor allowance for the repair. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact bendix at 1‑800‑478‑1793 or utility at 626‑965‑1541.

Recall number 03V361000 · Recall details

Suspension: front: hubReported May 24, 2000 · 271 vehicles affected
What is wrong
Vehicle description: van-refrigerated/dry freight trailers equipped with conmet pregreased trailer hubs and a tire inflation system. The outboard bearing on the pregreased trailer axle hubs used with the tire inflation systems may fail due to the intrusion of contaminants through the tire inflation system.
Risk
An outboard bearing failure can result in a separation of the hub assembly from the spindle.
Remedy
Authorized dealers are instructed to convert greased hubs to oil hubs if the tire inflation system is to remain on the trailer. If the tire inflation system is removed, the hub must be inspected for contamination and corrosion. The hub and bearing assembly must be replaced if there is evidence of corrosion. If there is no evidence of corrosion, lubricant and seal manitenance can be performed and the hub reinstalled.

Recall number 00V102003 · Recall details

See all 2 recalls for the 2000 Utility VS2R

Technical service bulletins for the 2000 Utility VS2R 4

Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.

Used buying checklistWhat to check on a 2000 Utility VS2R before you buy

Compare the 2000 Utility VS2R

Other model years

Questions about the 2000 Utility VS2R

Is the 2000 Utility VS2R reliable?

Owners have filed 0 complaints about the 2000 Utility VS2R.

What is the most common problem with the 2000 Utility VS2R?

There are not enough complaints to tell.

How many recalls does the 2000 Utility VS2R have?

2 recalls, covering service brakes, air and suspension.

Share your experience with the 2000 Utility VS2R

Tell other buyers what went wrong and what it cost. We review every report before it appears, and we never publish names, emails or VINs.

No names, contact details or links. Reports about a dealer or a person are not published.

VIN decoder

See the problems and recalls for an exact car

Buying a used 2000 Utility VS2R?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history
Is this car on a recall?Check VIN