Volvo Wah recalls
There are 11 safety recalls on record for the Volvo Wah, covering 163,736 vehicles in total across all the models in each campaign. Newest first.
Volvo Wah recalls by model year
2000 21999 41998 41997 51996 11995 31994 21993 11992 11991 11990 1
All recalls
Steering: linkages: tie rod assembly
- What is wrong
- On some heavy duty class 8 vehicles equipped with arvinmeritor axle assemblies which may have been manufactured with trw model 20edl ball sockets, the tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket in some applications.
- Risk
- If this condition occurs, the driver can lose steering control, possibly resulting in a vehicle crash.
- Remedy
- Dealers will replace the ball socket assemblies. This campaign supersedes the federal safety agency campaign nos. 01v‑139.001 and 02v‑037.002. Owner notification began july 25, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact volvo trucks at 1‑800‑528‑6586.
Recall number 02V037005 · Recall details
Steering: linkages: tie rod assembly
- What is wrong
- Vehicle description: heavy duty, class 8, trucks equipped with tie rod assemblies containing 24-dl model ball sockets and manufactured by trw. Certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which can lead to premature wear of the socket.
- Risk
- If this condition occurs, the driver can lose partial control of the right front wheel, possibly resulting in a crash.
- Remedy
- Dealers will replace the defective ball sockets and/or drag links. Owner notification began during may 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact volvo trucks at 1‑800‑528‑6586.
Recall number 01V044013 · Recall details
Service brakes, air: antilock
- What is wrong
- Vehicle description: heavy duty trucks built with bendix air ABS with an ec-17 1030r electronic control unit (ecu), there have been reports of unwanted ABS activation at low speeds caused by 1) chafed ABS wheel speed sensor wires on rotating parts or 2) a damaged component at the wheel end that generates a certain type of erratic sensor signal.
- Risk
- This condition could cause the ABS ecu to exhaust the air at the air brake modulators for one or more of the wheels. This could result in extended braking distances and a possible crash.
- Remedy
- Dealers will replace the ABS ecu.
Recall number 00V232003 · Recall details
Parking brake
- What is wrong
- Vehicle description: heavy duty trucks equipped with haldex manifold dash valves (mdv) used in tractor and trailer parking brakes. These valves do not meet the requirements of fmvss no. 121, "air brake systems." a loss of the isolation of the two brake system circuits can result in the loss of service brakes when there is another failure of one of the two brake circuits.
- Risk
- The loss of service brakes can occur, increasing the risk of a crash.
- Remedy
- Dealers will replace the suspect valves.
Recall number 00V002002 · Recall details
Trailer hitches: fifth wheel assembly
- What is wrong
- Vehicle description: heavy duty class 8 trucks equipped with fontaine fifth wheel assemblies, models sl5wms6125, sl5wms7125, sl5wms8125, sl5wms9125, sl5wms10125, sl5apm6125, sl5apm7125, slapm8125, sl5apm9125, sl5apm10125, sl5wms-d, sl5apm-d, and sl5bps-d. Improper installation of the fifth wheel assembly can cause cracking of the fifth wheel mounting plate.
- Risk
- Under the trailer loading, the mounting plate could eventually fail due to fatigue.
- Remedy
- Dealers will inspect and replace the mounting plates that are cracked.
Recall number 00V019001 · Recall details
Trailer hitches
- What is wrong
- Vehicle description: heavy duty class 8 trucks. The antilock brake system (ABS) wire in the trailer cable junction box at the end of the frame may not contain power for the trailer ABS as required by fmvss no. 121, "air brake systems."
- Risk
- Under a heavy brake application (lock up), a non-functioning trailer ABS could allow the trailer to skid, increasing the risk of a crash.
- Remedy
- Dealers will install the electrical circuit required to activate the center pin of the trailer cable circuit.
Recall number 99V274000 · Recall details
Suspension: front: springs: air suspension: lines and fittings
- What is wrong
- Vehicle description: class 8 heavy duty trucks. The air suspension control valve supply line was not plumbed through an air pressure protection valve. In the event of a failure, there would be loss of air pressure in the 'b' system air reservoir that supplies air pressure for the front steer axle brakes.
- Risk
- This condition would result in increased stopping distances.
- Remedy
- Dealers will install the necessary air pressure protection valve.
Recall number 98V255000 · Recall details
Wheels: rim
- What is wrong
- Vehicle description: heavy duty trucks equipped with aftermarket aluminum dual wheels, 22.5x8.25, one-piece, tubeless, supplied by accuride/akw. Certain design revisions combined with process conditions caused fatigue cracks in these wheels.
- Risk
- This condition can cause failure of these wheels.
- Remedy
- Accuride/akw will replace these wheels.
Recall number 98V120001 · Recall details
Suspension: front: wheel bearing
- What is wrong
- Vehicle description: class 8 heavy duty trucks. The steer axle wheel bearing jam nut lock washer may not have been bent over the jam nut after the wheel bearings were adjusted.
- Risk
- If this condition exists, the jam nut and wheel bearing adjusting nut can back off the spindle allowing the wheel and the brake drum assembly to separate from the vehicle increasing the risk of a vehicle crash.
- Remedy
- Dealers will inspect the steering axle wheel bearing jam nut lock washer to determine if it is bent over the jam nut, and if not, repair as required.
Recall number 97V212000 · Recall details
Suspension: rear: springs: air suspension system
- What is wrong
- The rear suspension axle retention plate can break under normal use, affecting axle alignment.
- Risk
- This condition could result in loss of rear axle stability affecting vehicle directional control and increasing the potential for a vehicle crash.
- Remedy
- Dealers will remove and replace the axle retention clip plates on affected vehicles.
Recall number 96V032000 · Recall details
Service brakes, air: controls, pedals and linkages
- What is wrong
- Undercoating applied to the inside of the cab shell squeezed out during assembly onto the brake pedal plunger.
- Risk
- Undercoating on the plunger may cause the plunger to stick resulting in increased brake pedal effort and/or slow release of the brakes increasing the potential for a vehicle accident.
- Remedy
- Dealers will clean the undercoating from the brake pedal plunger assembly, lubricate and reinstall the brake pedal plunger assembly.
Recall number 95V218000 · Recall details
Questions about the Volvo Wah recalls
How do I check if my Volvo Wah has an open recall?
Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.
Do I have to pay for a recall repair?
No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.
How many recalls does the Volvo Wah have?
11, covering steering, service brakes, air and parking brake.
VIN decoder
See the problems and recalls for an exact car
Buying a used Volvo Wah?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history