1999 Volvo WX recalls
There are 10 safety recalls on record for the 1999 Volvo WX, covering 57,548 vehicles in total across all the models in each campaign. Newest first.
All recalls
Power train: automatic transmission
- What is wrong
- On certain heavy-duty class 8 vehicles, the body builder wiring option was mis-wired in such a way that the auto neutral with service brake status option may allow the transmission to go into forward gear without the driver's foot pressing down on the brake pedal first.
- Risk
- Unintended movement of the vehicle could put persons in danger inside and outside the vehicle.
- Remedy
- Volvo trucks will notify its customers and install an additional air operated stop light switch and the necessary wiring changes. Owner notification is expected to begin during september 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact at 1‑800‑528‑6586.
Recall number 03V308000 · Recall details
Steering: linkages: tie rod assembly
- What is wrong
- On some heavy duty class 8 vehicles equipped with arvinmeritor axle assemblies which may have been manufactured with trw model 20edl ball sockets, the tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket in some applications.
- Risk
- If this condition occurs, the driver can lose steering control, possibly resulting in a vehicle crash.
- Remedy
- Dealers will replace the ball socket assemblies. This campaign supersedes the federal safety agency campaign nos. 01v‑139.001 and 02v‑037.002. Owner notification began july 25, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact volvo trucks at 1‑800‑528‑6586.
Recall number 02V037005 · Recall details
Steering: linkages: tie rod assembly
- What is wrong
- Vehicle description: heavy duty, class 8, trucks equipped with tie rod assemblies containing 24-dl model ball sockets and manufactured by trw. Certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which can lead to premature wear of the socket.
- Risk
- If this condition occurs, the driver can lose partial control of the right front wheel, possibly resulting in a crash.
- Remedy
- Dealers will replace the defective ball sockets and/or drag links. Owner notification began during may 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact volvo trucks at 1‑800‑528‑6586.
Recall number 01V044013 · Recall details
Steering: linkages: tie rod assembly
- What is wrong
- Vehicle description: heavy duty class 8 vehicles equipped with arvinmeritor axle assemblies which may have been manufactured with trw model 20edl ball sockets. The tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket in some applications.
- Risk
- If this condition occurs, the driver can lose steering control, possibly resulting in a vehicle crash.
- Remedy
- Dealers will replace the ball socket assemblies. The campaign has been superceded by recall no. 02v037002. Owner notification began november 17, 2000. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact volvo trucks at 1‑800‑528‑6586.
Recall number 01V139001 · Recall details
Steering: linkages
- What is wrong
- Vehicle description: heavy duty trucks equipped with trw 20-edl ball-socket assemblies. Certain of the ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket. These bearings were produced between july 5 and october 3, 1999.
- Risk
- If this condition occurs, the driver can lose partial control of the right front wheel, possibly resulting in a vehicle crash.
- Remedy
- Dealers will replace the ball-socket assemblies.
Recall number 00V246306 · Recall details
Service brakes, air: antilock
- What is wrong
- Vehicle description: heavy duty trucks built with bendix air ABS with an ec-17 1030r electronic control unit (ecu), there have been reports of unwanted ABS activation at low speeds caused by 1) chafed ABS wheel speed sensor wires on rotating parts or 2) a damaged component at the wheel end that generates a certain type of erratic sensor signal.
- Risk
- This condition could cause the ABS ecu to exhaust the air at the air brake modulators for one or more of the wheels. This could result in extended braking distances and a possible crash.
- Remedy
- Dealers will replace the ABS ecu.
Recall number 00V232003 · Recall details
Fuel system, gasoline: storage: tank assembly: filler pipe and cap
- What is wrong
- Vehicle description: heavy duty trucks equipped with a steel fuel tank. The closure only fuel tank cap, installed on the steel fuel tank, failed when the tank was dropped from a 10' height as required by fmvss no. 393, "liquid fuel tanks."
- Risk
- Fuel leakage could occur, increasing the risk of a fire.
- Remedy
- Owners will be provided with a new fuel tank cap.
Recall number 00V012000 · Recall details
Service brakes, air
- What is wrong
- Vehicle description: dual steer class 8 heavy duty trucks. The front steer axle brakes do not comply with the requirements of fmvss no. 121, "air brake systems."
- Risk
- A slow brake release time can cause premature brake wear which if left unchecked could lead to brake failure and vehicle crash.
- Remedy
- Dealers will install a relay valve in the front steering axle brake system.
Recall number 99V240000 · Recall details
Service brakes, air
- What is wrong
- Vehicle description: heavy duty trucks equipped with meritor air brake automatic slack adjusters. Some of the automatic slack adjusters had insufficient torque applied to the guide pawl cap screw.
- Risk
- Without sufficient torque on the guide pawl cap screw, the brakes could gradually lose adjustment, increasing the vehicle stopping distance.
- Remedy
- Dealers will check the torque on the automatic slack adjuster guide pawl. If there is no torque, the brakes will be adjusted and the guide pawl will be tightened to 15-20 ft. Lbs.
Recall number 99V055004 · Recall details
Steering: gear box: shaft sector
- What is wrong
- Vehicle description: heavy duty trucks. The steering slip shaft connecting the steering column to the steering gear input shaft might be too long.
- Risk
- The steering gear input shaft could crack increasing the risk for loss of steering control.
- Remedy
- Dealers will replace the steering slip shafts.
Recall number 99V054000 · Recall details
Questions about the 1999 Volvo WX recalls
How do I check if my 1999 Volvo WX has an open recall?
Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.
Do I have to pay for a recall repair?
No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.
How many recalls does the 1999 Volvo WX have?
10, covering power train, steering and service brakes, air.
VIN decoder
See the problems and recalls for an exact car
Buying a used 1999 Volvo WX?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history