White Gmc WX recalls

There are 8 safety recalls on record for the White Gmc WX, covering 103,576 vehicles in total across all the models in each campaign. Newest first.

White Gmc WX recalls by model year

1998 1 1997 1 1996 2 1995 4 1994 3 1993 2 1992 2 1991 3 1990 3

All recalls

Suspension: front: springs: air suspension: lines and fittingsReported October 14, 1998 · 95,013 vehicles affected

What is wrong: Vehicle description: class 8 heavy duty trucks. The air suspension control valve supply line was not plumbed through an air pressure protection valve. In the event of a failure, there would be loss of air pressure in the 'b' system air reservoir that supplies air pressure for the front steer axle brakes.
Risk: This condition would result in increased stopping distances.
Remedy: Dealers will install the necessary air pressure protection valve.

Recall number 98V255000 · Recall details

Service brakes, airReported March 23, 1996 · 771 vehicles affected

What is wrong: The traction solenoid exhaust can be obstructed due to inadequate drainage and a build-up of road contamination between the mounting bracket and the solenoid housing. The obstructed exhaust prevents the relay valve control air pressure from venting after a differential braking traction event.
Risk: This condition would keep the rear axle service brakes applied without any brake pedal movement by the driver increasing the risk of a vehicle accident.
Remedy: Dealers will remove the suspect valve and install a new valve that has a modified solenoid housing which will allow for sufficient drainage and a new valve mounting bracket with increased height to reduce entry of contamination.

Recall number 96V095000 · Recall details

Suspension: rear: springs: air suspension systemReported February 12, 1996 · 6,034 vehicles affected

What is wrong: The rear suspension axle retention plate can break under normal use, affecting axle alignment.
Risk: This condition could result in loss of rear axle stability affecting vehicle directional control and increasing the potential for a vehicle crash.
Remedy: Dealers will remove and replace the axle retention clip plates on affected vehicles.

Recall number 96V032000 · Recall details

Steering: linkagesReported February 28, 1995 · 1,157 vehicles affected

What is wrong: The wrong ball socket assembly was used to attach the steering arms to both the steering drag link and the steering ram assist cylinder, resulting in a binding condition.
Risk: This condition can cause the ball socket to fatigue, increasing the potential for loss of steering control and an accident.
Remedy: Dealers will replace the ball socket assembly on the affected vehicles.

Recall number 95V038000 · Recall details

Visibility: windshield wiper/washerReported December 4, 1993 · 74 vehicles affected

What is wrong: The indicator for the intermittent windshield wiper control on the vehicle dashboard does not illuminate when the headlights are activated.
Risk: The indicator control does not comply with fmvss 101,"controls and displays". The control would be difficult to locate during night operation of the vehicle.
Remedy: Install an illumination feature on the wiper intermittent control.

Recall number 93V001000 · Recall details

Steering: linkagesReported November 19, 1991 · 55 vehicles affected

What is wrong: The pinch bolt used to retain the pitman arm to the steering gear may not meet the heat treat specification for a grade 8 fastener and may strip before proper torque is achieved.
Risk: The pinch bolt may fail causing separation of the pitmanarm and the steering linkage, and loss of steering control which could resultin an accident.
Remedy: Replace the pinch bolts with properly heat treated bolts.

Recall number 91V203000 · Recall details

Visibility: defroster/defogger/HVAC system: windshield: electrical heating elementReported November 1, 1990 · 405 vehicles affected

Risk: If such contact occurs when heater fan is on mediumspeed, an electrical short occurs, causing the fan speed control resistor tooverheat and melt the plastic fan housing; this would create a potential fora fire.
Remedy: Reposition air ride suspension valve to prevent its contact with the heater fan control switch.

Recall number 90V179000 · Recall details

Engine and engine cooling: cooling system: fanReported December 18, 1989 · 67 vehicles affected

What is wrong: The blade(s) may separate from the engine cooling fan assembly.
Risk: Blades separating from the fan assembly could present asafety hazard to anyone walking in the vicinity of the engine.
Remedy: Remove and replace suspect fan assembly.

Recall number 89V229000 · Recall details

Questions about the White Gmc WX recalls

How do I check if my White Gmc WX has an open recall?

Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.

Do I have to pay for a recall repair?

No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.

How many recalls does the White Gmc WX have?

8, covering suspension, service brakes, air and steering.

VIN decoder

See the problems and recalls for an exact car

Buying a used White Gmc WX?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history