The worst 2010 Winnebago Tour problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
Recalls 2
Electrical system
- What is wrong
- Winnebago Industries is recalling certain model year 2010-2013 Winnebago Journey and Tour motorhomes, and certain model year 2010-2013 Itasca Meridian and Ellipse motorhomes, manufactured June 18, 2010, through November 17, 2011. The chassis are equipped with connectors for diode jumpers that may come loose, resulting in an open circuit. Two circuits are affected: The one that disengages the cruise control with brake pedal use, and the one that illuminates the brake lights with brake pedal use.
- Risk
- Failure of the cruise control to disengage when the brakes are applied may increase the risk of a vehicle crash. Without the brake lights illuminating when the brakes are applied, the driver's intent is not communicated, increasing the risk of a crash.
- Remedy
- Daimler Trucks North America will be conducting the recall on behalf of Winnebago Industries. Daimler will notify owners, and dealers will inspect the the diode jumpers to make sure they are fully locked in place and will correct the vehicles as needed. The recall began December 26, 2012. Owners should contact Winnebago at 1‑641‑585‑3535 or Daimler Trucks at 1‑503‑745‑6910.
Recall number 12V566000 · Recall details
Equipment: other: labels
- What is wrong
- Winnebago is recalling certain model year 2010-2011 tour and itasca ellipse motor homes manufactured from august 7, 2009 through february 7, 2011, for failing to comply with the requirements of part 567, "certification." the vehicles are equipped with labels indicating the wrong type of load range tires.
- Risk
- These vehicles do not comply with the requirements of part 567 certification.
- Remedy
- Owners will be provided with new tire information labels and installation instructions. At the customer's option, a dealer can perform the installation for them. This service will be performed free of charge. The safety recall is expected to begin on february 25, 2011. Owner may contact winnebago at 1‑641‑585‑6939.
Recall number 11V096000 · Recall details
Technical service bulletins for the 2010 Winnebago Tour 7
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- Service Bulletin sent to dealers advising of the required legal verbiage each RO should document.
- Service Bulletin sent to all Winnebago dealers
- Service Bulletin sent to all Winnebago dealers
- Service Bulletin sent to all dealers
- Service Bulletin to dealers reminding them to understand their state's Lemon Law and to comply with...
- Service Bulletin to dealers advising them of part sales training opportunities.
- General Parts and Service Letter to dealers detailing the warranty part return procedure.
Compare the 2010 Winnebago Tour
Other model years
Questions about the 2010 Winnebago Tour
Is the 2010 Winnebago Tour reliable?
Owners have filed 0 complaints about the 2010 Winnebago Tour.
What is the most common problem with the 2010 Winnebago Tour?
There are not enough complaints to tell.
How many recalls does the 2010 Winnebago Tour have?
2 recalls, covering electrical system and equipment.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2010 Winnebago Tour?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history