Vehicle: 2024 Acura Integra Affected Component: Steering Gearbox Assembly / Electric Power Steering (EPS) Related Recall: the federal safety agency Campaign Number 24V‑744 / Acura TSB 24-054 Description of Incident: My vehicle is actively experiencing the dangerous "sticky," heavy, and "notchy" steering defect outlined in the federal safety agency Campaign 24V‑744, which causes a sudden increase in steering effort at highway speeds. The authorized franchise dealership previously performed the initial recall remedy (grease/spring kit replacement). However, this remedy completely failed to resolve the underlying manufacturing defect, and the hazardous steering behavior persists, making the vehicle unsafe to operate. Because I live on an isolated island with only one authorized Acura franchise facility, I have no alternative dealership options. The local dealership management and the visiting Acura Field Technical Specialist are formally refusing to diagnose, evaluate, or replace this defective steering rack. They are using the presence of an unrelated, aftermarket air suspension modification—which was installed after the failed recall attempt and does not physically obstruct the steering gearbox assembly—as a pretext to deny federal safety recall resolution and standard warranty repair. The manufacturer is failing to provide a successful remedy for an active, critical safety hazard. Furthermore, the local franchise facility has ordered me to remove this unsafe vehicle from their property, creating a severe safety risk. I am requesting immediate the federal safety agency intervention to ensure the manufacturer provides a complete and effective steering rack replacement as required by federal law.
2024 Acura Integra steering problems
52 complaints (81% of all complaints for this car).
- owner complaints
- 52
- of this car's complaints
- 81%
- crashes
- 0
- recalls
- 1
Which part fails
Owners did not name a specific part.
At what mileage
Complaints by mileage at the time of the problem.
Acura Integra steering problems in other years
Related recalls
Steering
- What is wrong
- Honda (American Honda Motor Co.) is recalling certain 2023-2025 Acura Integra, Civic Type R, CR-V Hybrid, CR-V, HR-V, 2022-2025 Civic, Civic Hatchback, 2024-2025 Acura Integra Type S, 2025 CR-V Fuel Cell EV, Civic Hybrid, and Civic Hatchback Hybrid vehicles. The steering gearbox assembly may have been manufactured incorrectly, which can cause excessive internal friction and lead to difficulty steering the vehicle.
- Risk
- Difficulty steering can increase the risk of a crash.
- Remedy
- Dealers will replace the worm gear spring and redistribute or add grease as necessary, free of charge. Owner notification letters were mailed November 18, 2024. Owners may contact Honda Customer Service at 1‑888‑234‑2138. Honda's numbers for this recall are SJS, MJU, QJT and VJV.
Recall number 24V744000 · Recall details
Related investigations
Momentary Increased Steering Effort
On November 29, 2023, the Oï¬ce of Defects Investigation (ODI) opened this Engineering Analysis (EA23003) to assess allegations of momentary increase in steering eï¬ort in model years (MY) 2022-2023 Honda Civic, 2023MY Honda CR-V, and 2023MY Acura Integra vehicles (subject vehicles). The complaints received by ODI alleged that the subject vehicles experienced a momentary increase in required steering eï¬ort (described as âsticky steeringâ) occurring mostly at highway speeds after driving for an extended amount of time; these complaints could not be duplicated during dealer service techniciansâ quick test drives. The complaints had been received over the previous two years with most occurring with low vehicle mileage. The steering gear of these vehicles is aided by an electrical power assist unit. This power assist unit inputs force on the steering rack via a worm gear and worm wheel assembly. During PE23005, Honda stated this condition of momentary increase in steering eï¬ort occurs due to two factors within this power assist unit. First, during manufacturing, the steering worm wheel goes through annealing and component conditioning processes. These processes cause internal stress and strain within the steering worm wheel. This strain is slowly released over the ï¬rst few months of the vehicle life. Over time, the released strain causes deformation of the teeth on the worm wheel, causing the worm gear to catch on the worm wheel. This catching results in the driverâs momentary increased steering eï¬ort. Second, the manufacturing process did not guarantee consistent grease application and, therefore, some subject vehicles received insufficient grease which contributed to the momentary increase in steering eï¬ort. During EA23003, ODI further analyzed the potential safety related consequences of the momentary increase in steering eï¬ort. the federal safety agencyâs Vehicle Research and Test Center (VRTC) duplicated the allegations of increased steering eï¬ort. In addition, VRTC discovered the steering worm wheel and worm gear tended to push grease out of the meshing area, resulting in large amounts of grease resting on top of the worm wheel. Information Request responses collected and reviewed by ODI showed Honda had also discovered this additional root cause during the federal safety agencyâs EA. In addition, Honda discovered the preload of the worm wheel gear spring was set too high, increasing the gear slide load and resulting in higher friction and increased torque ï¬uctuation when steering. The number of consumer complaints made to ODI continued to increase with the expansion of scope from the PE to the EA. Additionally, during EA23003, ODI received ten complaints alleging a crash, in addition to the 13 complaints ODI had received as of the time it opened EA23003. In total, 23 crashes have been reported to ODI due to this alleged defect. On October 3, 2024, Honda ï¬led the federal safety agency Recall No. 24V‑744 to address this defect. The recall will provide consumers with a new steering worm wheel gear spring with a decreased load. Additionally, dealerships will add additional grease and relocate any grease sitting on top of the worm wheel back into the meshing area. The scope of this recall includes all Honda vehicles that were manufactured with this speciï¬c improperly produced steering worm wheel and spring. In view of the recall action being taken by Honda, ODI is closing EA23003. the federal safety agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identiï¬cation Number document, go to
EA23003
What 2024 Acura Integra owners say
Most recent owner complaints, unedited.
I purchased this car 2 weeks ago and noticed when I drive over 45 mph the steering wheel kind of freezes up and shakes. A warning sign pops up that say steering required and has a symbol of a steering wheel with hands on each side of it. This lasts for about 10 seconds or so, then goes away. Feels really scary like I could get into an accident. This is the first place I have reported the problem to.
This is an ongoing issue regarding this vehicle's steering where it can become very hard to turn the steering wheel when going highway speeds. I tried calling a dealer and corporate, and they both told me that parts are not available and I have to wait.
The steering on this vehicle began feeling sticky intermittently, not every trip starting 7/31/2024. Since then it has become more and more of an issue. The sticky steering is most noticeable on the interstate when trying to recenter the steering wheel after going around a curve. More so when straightening from a left turn. I had researched, just after leasing the vehicle, and saw this was an issue on 2023 models. Nothing has happened until about 10,000 miles on my odometer. It has become prevalent during every trip taken now, including on secondary roads at lower rates of speed. A service appointment was scheduled with my dealer, a couple of days prior to the recall. I was advised to bring it in, as the recall had not been announced at that time. When I took it in on 10/15/2024, the dealer shared there was nothing they could do at this point, didn’t even inspect it or look at it, as it is too early in the recall and they had not been told how to fix it. They also shared it could be months before something could be done. I am writing to document this issue, should there be an incident, and share that it is a little unnerving to drive a vehicle that could potentially cause an accident and have a dealership say there is nothing they can do and that I should continue driving the vehicle… No lights, warnings, etc have come on in association with this issue.
The contact owns a 2024 Acura Integra. The contact stated that while driving at various speeds, the steering wheel seized and became difficult to turn in either direction. The cause of the failure was not yet determined. The local dealer was notified of the failure. The manufacturer was not yet contacted. The failure mileage was 3,500.
The steering wheel got sticky you have to make extra effort something is bad because is a new car and Acura don't make a recall when the new civic already have a recall and share the same chasis
Sticky steering, when trying to make small adjustments the steering wheel feels locked and takes more of a rotation to get it “unstuck”. This causes me to look like I’m swerving almost just trying to make a small adjustment to the steering wheel.
The steering wheel locks momentarily at cruising speed of 35-45 MPH. This results in the need of over or under compensating the steering with extra effort. The steering is generally locked in the same position and it also frequently moves the direction of the vehicle to the point that I fear this is a severe safety issue.
The contact owns a 2024 Acura Integra. The contact stated that while driving at various speeds, the steering wheel had to be overcorrected. There was an abnormal thumping noise detected. There were no warning lights illuminated. The vehicle was taken to the local dealer, where it was diagnosed that the steering column needed to be replaced. The vehicle was not repaired due to parts being on backorder. The manufacturer was contacted and opened a case. The failure mileage was approximately 12,000. The VIN was not available.
After driving on longer drives the steering becomes "sticky" off center. Looses its smoothness of operation. Usually does not occur on shorter drives, but, the longer you drive the more prevalent the problem becomes. This is my wife's car and I had not driven it for a while, as I was driving it the problem manifested itself. As soon as I said something to my wife, she said she had noticed it as well. Upon a suggestion from a auto tech friend I turned off all the electronic nannies, but, the problem is still there.
Questions about the 2024 Acura Integra steering
Does the 2024 Acura Integra have steering problems?
Owners have filed 52 complaints about the steering of the 2024 Acura Integra, 81% of all its complaints, more than any other problem.
At what mileage do 2024 Acura Integra steering problems start?
Not enough complaints include the mileage to tell.
Was there a recall on the 2024 Acura Integra steering?
Yes, 1 recall: 24V744000. Check your VIN to see if your car still needs the free repair.
What year does the Acura Integra have bad steering?
The Acura Integra model years with the most steering complaints are 2023 (190 complaints) and 2024 (52 complaints).
Other 2024 Acura Integra problems
Driver assistance 4Electrical 2Engine 2Visibility 2Acceleration 1Airbags 1Body 1Wheels 1
VIN decoder
See the problems and recalls for an exact car
Buying a used 2024 Acura Integra?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history