The contact owns a 2011 BMW 128I. The contact received notification of the federal safety agency Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.
2011 BMW 128I engine complaints
Page 2 of 2: complaints 11 to 25 of 25, newest first, as owners wrote them.
The vehicle's ignition coil and spark plugs have had to be replaced several times. Car lost power while driving. Stalled engine at red lights and green. The PCV Valve Heater is causing the ignition coil and spark plugs to malfunction, leading to expensive repairs.
The contact owns a 2011 BMW 128I. The contact received notification of the federal safety agency Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2011 BMW 128I. The contact received notification of the federal safety agency Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owned a 2011 BMW 128i. The contact received notification of the federal safety agency Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the repair was unavailable. The contact had experienced a failure. The contact stated as he pulled into a parking lot at approximately 5 MPH he began to smell a burning plastic odor. The contact said that the vehicle dash vents began to issue gray smoke. The contact had parked the vehicle and turned it off, he opened the hood and the vehicle engine compartment immediately ignited. The contact stated that the fire department was called and extinguished the fire with foam. The police also arrived on the scene and filed a report. The vehicle had to be towed to an impound lot and was no longer drivable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was unknown. Parts distribution disconnect.
The contact owns a 2011 BMW 128i. The contact stated that on several occasion while driving, the vehicle stalled without warning. The contact also stated that when she attempted to restart the vehicle, the engine failed to turn over. No warning lights were illuminated. Additionally, the contact stated that the engine would randomly start. The contact stated that the electrical system failed to operate as designed. The vehicle was taken to the dealer where the cause of the failure could not be determined. The manufacturer was notified by the dealer of the failure and the contact was informed that a case was opened. The failure mileage was approximately 48,000.
The contact owns a 2011 BMW 128i. The contact received notification of the federal safety agency Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that while the vehicle was idle at a red light and attempting to accelerate to make a right turn, the traction control warning light and the ABS warning light flashed with an error message. The vehicle the accelerated unintentionally. The contact had to straighten the steering wheel to regain control of the vehicle after the vehicle had fishtailed. The vehicle regained normal function. The contact stated that there was smoke coming from the rear passenger’s side of the vehicle and also inside the cabin of the vehicle. The contact stated that there was also smoke coming from the vehicle starting the vehicle. The approximate failure mileage was 96,000. VIN tool confirms parts not available.
My car has been effected by the PCV recall since march 2022. Smoking profusely and smelling like burning electronics. This happened while my family and I were in the car. This recall has occurred on numerous BMW's with more than 917,000 needing to be recalled for it. This defective PCV can cause a fire meaning the vehicle is completely unsafe for me and my family to drive. This is the THIRD time for this recall. I am unable drive my car for safety reasons because of this recall and I have not had a vehicle for 2 months now. I called Crevier BMW and they told me, as of 6/21/22, that a fix will not be available for several months. This is unacceptable. BMW is not solving this recall in a timely manner and it has caused major issues with my life and going to work.
The contact owns a 2011 BMW 128i. The contact received notification of the federal safety agency Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, the vehicle lost motive power. There was smoke coming from under the hood. The vehicle was towed to an independent mechanic and diagnosed with engine failure. The mechanic informed the contact that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 113,000. VIN tool confirms parts not available. (RECALL RELATED INCIDENT) TS
I received error code P052B and the car had a high pitched whistle and was way down on power. I had it towed to the nearest dealer for service. After speaking with the technician, they told me they'd gone through with a boroscope and saw nothing out of the ordinary and recommended a new valve cover since the PCV was bad. I opted to order replacement spark plugs, coils, an eccentric valve sensor, and figured why not replace the Vanos bolts while in there too. Unfortunately after getting the cover off, it's been discovered that 7! of the Vanos bolts have already either sheared off or backed out. Pretty much a worst case scenario as my car was built in 2010 and is just outside the 10 year unlimited mile warranty outlined in the service bulletin . This service warranty does not appear long enough, and the item should have been recalled instead of warrantied. (Similar years similar issue in the BMW N55 motor was recalled https://www.autoblog.com/2014/04/11/bmw-broadens-engine-bolt-recall-nearly-half-million-cars-worldwide/)
Camshaft housing belts are losses or broken
Vanos failed on 2011 bmw 128i, manufacture offered extended warranty and failed to honor said warranty. Vehickle makes loud noise. Car will eventually break making car undrivable ever again, with 7k repair cost which exceeds value of car with less than 100k miles
Tl* the contact owns a 2011 bmw 128i. The contact stated that the battery warning indicator flashed more than once and, while driving in reverse, smoke emitted from the vehicle under the hood. The vehicle was pulled back into the garage due to the failure. The dealer (fields bmw winter park, 963 wymore rd, winter park, fl 32789, (407) 628-2100) was unable to verify when the manufacturer would supply the remedy and parts for the federal safety agency campaign number: 17v683000 (engine and engine cooling). The manufacturer was notified of the failure. The approximate failure mileage was 118,000. Vin tool confirms parts not available.
Tl* the contact owns a 2011 bmw 128i. The contact stated that while attempting to accelerate from a red light at 5 MPH, the vehicle shuddered and stalled while making a loud knocking noise. The vehicle was towed to an independent mechanic where it was diagnosed that the aluminum bolts in the variable cam shaft timing adjustment housing had failed and needed to be replaced. The mechanic advised the contact to speak to a bmw dealer in order to have the repair work done under a recall. The contact spoke to bmw of tulsa located at 9702 s memorial dr, tulsa, ok 74133 and was informed that they would not repair the vehicle for free as the VIN was not included in the federal safety agency campaign number 14v176000 (engine and engine cooling). The vehicle was repaired. The manufacturer was made aware of the failure and stated that the contact should speak to the federal safety agency to have his VIN added to the recall. The approximate failure mileage was 111,000.
2011 bmw 128i. Consumer writes in regards to a recall notice concerning assembly bolts. *tgw the dealer informed the consumer, the parts were not available. Recall # 14v176000.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2011 BMW 128I?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history