The contact owns a 2011 BMW 128I. The contact stated that on several occasions while driving at various speeds, the vehicle hesitated. The contact stated that on one occasion while driving at an undisclosed speed, the vehicle hesitated and then stalled. The vehicle was not able to restart. The vehicle was towed to the residence. The vehicle was then towed to a dealer, where it was diagnosed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 120,000.
2011 BMW 128I: engine stalls while driving
6 of the 50 complaints about the 2011 BMW 128I describe engine stalls while driving.
- owner complaints
- 6
- of this car's complaints
- 12%
- typical mileage
- 102,000
- recalls
- 3
Engine stalls while driving by model year
- 20132
- 20122
- 20116
- 20101
- 20092
- 20081
What owners say
The contact owns a 2018 BMW 128I. The contact stated while driving at various speeds, the vehicle stalled. While at a stop sign, the vehicle stalled. The check engine warning light was illuminated. The contact received notification of the federal safety agency Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was approximately 102,000. VIN tool confirms parts not available.
The vehicle's ignition coil and spark plugs have had to be replaced several times. Car lost power while driving. Stalled engine at red lights and green. The PCV Valve Heater is causing the ignition coil and spark plugs to malfunction, leading to expensive repairs.
The contact owns a 2011 BMW 128i. The contact stated that on several occasion while driving, the vehicle stalled without warning. The contact also stated that when she attempted to restart the vehicle, the engine failed to turn over. No warning lights were illuminated. Additionally, the contact stated that the engine would randomly start. The contact stated that the electrical system failed to operate as designed. The vehicle was taken to the dealer where the cause of the failure could not be determined. The manufacturer was notified by the dealer of the failure and the contact was informed that a case was opened. The failure mileage was approximately 48,000.
Tl* the contact owns a 2011 bmw 128i. The contact stated that while attempting to accelerate from a red light at 5 MPH, the vehicle shuddered and stalled while making a loud knocking noise. The vehicle was towed to an independent mechanic where it was diagnosed that the aluminum bolts in the variable cam shaft timing adjustment housing had failed and needed to be replaced. The mechanic advised the contact to speak to a bmw dealer in order to have the repair work done under a recall. The contact spoke to bmw of tulsa located at 9702 s memorial dr, tulsa, ok 74133 and was informed that they would not repair the vehicle for free as the VIN was not included in the federal safety agency campaign number 14v176000 (engine and engine cooling). The vehicle was repaired. The manufacturer was made aware of the failure and stated that the contact should speak to the federal safety agency to have his VIN added to the recall. The approximate failure mileage was 111,000.
Tl* the contact owns a 2011 bmw 128i. The contact stated that while driving 35 MPH and entering a highway, the vehicle stalled and failed to turn. The contact received assistance from the fire department who advised him that the battery was dead. The vehicle was towed to the dealer but a diagnostic was not performed. The failure was reported to the manufacturer. The failure and current mileage was 29,000.
Service bulletins that may apply
- Power Reduction, FC2A82 Intake VANOS and/or FC2A87 Exhaust VANOS Camshaft Fault: The ?Service Engine Soon?...
- "Power Reduction, FC 2A82 Intake VANOS and/or FC 2A87 Exhaust VANOS Camshaft Faults are Stored in...
- The engine?s intake charge-air duct limited warranty extension to 10 years/120,000 miles applies to...
- N20, N26, N55, N63TU, S63TU and S55 Engines: Bosch Injector ETK Part Number Error What's New: ? Procedure...
- N51, N52, N52K and N52T Engines: Various Eccentric Shaft Sensor Faults stored in the DME
- Si B12 14 12
- External Engine Oil Leaks and Repairs
- "N51, N52K, N52T and N55 Engine: Various Faults Stored in DME Related to VANOS and Camshaft Position
Related recalls
Engine and engine cooling: exhaust system: emission control: crankcase (PCV)
- What is wrong
- BMW of North America, LLC (BMW) is recalling certain 2008-2013 1 Series Coupe (128i); 2007-2013 3 Series Coupe (328i, 328xi, 328i xDrive); 2007-2010 X3 SAV (X3 3.0si, X3 xDrive30i); 2008-2013 1 Series Convertible (128i); 2006-2011 3 Series Sedan (325i, 325xi, 328i, 328xi, 328i xDrive, 330i, 330xi); 2006-2012 3 Series Wagon (328i, 328i xDrive); 2007-2013 3 Series Convertible (328i); 2006-2010 5 Series Sedan (525i, 525xi, 528i, 528xi, 530i, 530xi); 2006-2007 5 Series Wagon (530xi); 2007-2010 X5 SAV (X5 3.0si, X5 xDrive30i); 2006-2008 Z4 Coupe (Z4 3.0si); and 2006-2011 Z4 Roadster (Z4 3.0i, Z4 3.0si, Z4 sDrive30i) vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
- Risk
- An electrical short can cause the PCV valve heater to overheat, increasing the risk of a fire while driving or, soon after driving when parked.
- Remedy
- This recall supersedes and expands previous the federal safety agency recalls 17V‑683 and 19V‑273. Dealers will install an electrical wiring harness with fuse protection for the PCV Valve heater in potentially affected vehicles, free of charge. This recall supersedes and expands previous the federal safety agency recalls 17V‑683 and 19V‑273. Vehicles previously repaired under the prior recalls will need to come back for the new recall remedy. The remedy is currently being developed. Interim owner notification letters informing owners of the safety risk were mailed on April 1, 2022. Owner notification letters were mailed on July 22, 2022. Owners may contact BMW customer service at 1‑800‑525‑7417.
Recall number 22V119000 · Recall details
Engine and engine cooling: exhaust system: emission control: crankcase (PCV)
- What is wrong
- BMW of North America, LLC (BMW) is recalling certain 2008-2011 128i and 2007-2011 328i, 328xi, 328i xDrive, 525i, 525xi, 528i, 528xi, 530i, 530xi, X3 3.0si, X3 xDrive30i, X5 xDrive30i, Z4 3.0i, Z4 3.0si and Z4 sDrive30i vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
- Risk
- An electrical short can cause the parts within the PCV valve to melt, increasing the risk of a fire, even when the vehicle is not in use.
- Remedy
- BMW will notify owners, and dealers will replace the PCV valve heater, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notification by the end of October 2018. Owners may contact BMW customer service at 1‑800‑525‑7417.
Recall number 17V683000 · Recall details
Engine and engine cooling: engine
- What is wrong
- BMW of North America, LLC (BMW) is recalling certain model year 2010-2011 128i Coupe, 128i Convertible, 328i Sedan, 328i xDrive Sedan, 328i Coupe, 328i Convertible, 328i Sports Wagon and Z4 sDrive 30i, 2011-2012 135i Coupe, 135i Convertible, 335i Sedan, X5 xDrive 35i, and X6 xDrive 35i, 2011 335i xDrive Sedan, 335i Coupe, 335i Convertible, 528i Sedan, 535i Sedan, 535i xDrive Sedan, X3 xDrive 28i, and X3 xDrive 35i, 2010 X3 xDrive 30i, and X5 xDrive 30i, 2012 640i Coupe, and 640i Convertible and 2010-2012 535i Gran Turismo vehicles. In the affected vehicles, the bolts that secure the housing for the variable camshaft timing adjustment (VANOS) unit can loosen over time and may possibly break.
- Risk
- If the bolts loosen or break the engine may have reduced power or stall. An engine stall increases the risk of a crash.
- Remedy
- BMW will notify owners, and dealers will replace the four VANOS housing bolts for both VANOS units (intake and exhaust), free of charge. In addition, owners of approximately 170,172 model year 2010-2012 BMW vehicles equipped with inline 6 cylinder engines not covered by this recall, will receive an extended warranty to address this condition. The recall began on September 24, 2014. Owners may contact BMW at 1‑800‑525‑7417.
Recall number 14V176000 · Recall details
Questions about the 2011 BMW 128I stalling
Is engine stalls while driving a common problem on the 2011 BMW 128I?
6 of 50 owner complaints about the 2011 BMW 128I (12%) mention engine stalls while driving. The model year with the most reports is 2011.
Is there a recall or service bulletin for this on the 2011 BMW 128I?
There are 3 recalls and 13 service bulletins for the same area of the car. Check them below with your VIN.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2011 BMW 128I?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history