1992 BMW 325I engine problems

Filed Oct 3, 2002 · Engine · CA

Took car through car wash. Car came out dead. Turns out that this is a common problem where water gets into the main ECM computer and shorts it out. This is terrible. Bmw should issue a recall for this. $1100 for going through a simple car wash. Owners should be cautioned. Mr

Filed Aug 8, 2002 · Brakes, Electrical · TX

The water pump locked up, the fan blade broke and the belts burned, dealer replaced the water pump, fan and belts, the oil pan gasket was replaced due to an oil leak.

Filed Dec 12, 2001 · Engine · TX

While traveling vehicle lost power. Had vehicle towed to bmw, technician stated plastic cover to radiator had cracked, and had lost coolen. Cost to consumer was over thansand dollers. Please provide further information.

Filed Jun 30, 2001 · Engine · GA

I was losing coolant and I could not find a leak over more than a year. I reported the problem (at united bmw, duluth, ga) the found no problem. On the highway I noted the windshieln very clowdy and the smell of ethylene glycol coming from the heating ducts. Suddenly this big cloud of white mist in front of the right side of the vehicle. I pulled over and opened the hood only to be sprayed with the remnants of this fluid as it got on the fan. I jumped back and avoided any injury. The hose leading from the top of the radiator to the engine block had fallen off! That should be simple to fix! On closer inspection, the radiator attachments had completely fractured off! The fractured portion was stuck in the hose! And the remnant on the radiator is too short to securely anchor the hose to the radiator after removing the broken part from inside the hose. However, I use it this way and keep a supply of water in the cab for short trips.the fractured radiator was chronically leaking and over the past several winters there would be a mist on my windshield that was difficult to get rid of. Wiping with tissue would leave a steak most of the time! I note that bmw has recently recalled the radiator cap on this vehicle. From this experience I submit to you that high pressures did not cause the hose to rupture but a defective radiator that is subject to fracture at the point of hose connection resulting in chronic leaks particular at highway speeds and working preasures leading to mist and from the coolant within the vehicle and poor visibility. Turning the windchield defogger on does not clear this problem but adds to it! Bmw need to recall these defective radiators because of the danger of third degree burns and death as well as unsafe driving from the constant fogging of the windshield. Yours truly, [xxx]. *ak parts of this document have been redacted to protect personally identifiable information pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6).

Filed Jun 13, 2001 · Engine · CA

The radiator cap failed prior to recall notice 98v‑178, the consumer believes this is due to improper radiator design. Nlm

Filed Dec 7, 2000 · Engine · NJ

Car overheated while driving at about 40 MPH. Exact miles traveled while overheated unknown, but less than 10. Subsequent repairs indicated failed water pump (plastic impeller cracked) which caused overheating and damaged head gasket.

Filed Jul 25, 2000 · Engine · CA

Vehicle experienced failure of the coolant system prior to recall notification (93v‑015).

Filed Oct 21, 1999 · Engine · CA

Vehicle experienced problem with water leaking into the engine control unit, causing vehicle to stalls while driving, dealer notifed and repaired that unit. After two monthsand two weeks, unit needed to be replaced again at consumer's cost. Dealer refused to correct problem. Can the federal safety agency provide additional information or help in this matter.

Filed Oct 15, 1999 · Engine, Visibility · WV

Radiator cord cracked, and the coolant light came on. Also, windows fogged up due to defroster working in properly as a result of an electrical short.

Filed Sep 14, 1999 · Engine · CA

While traveling on I-5, I noticed that the coolant temperature was increasing to dangerous levels. Upon returning to the san francisco area, I took the car to a repair shop and was told that the water pump had failed due to the breakage of the impeller. I was also told that this was a problem in this vintage of bmw since the manufacturer had used a plastic impeller in the water pump, rather than a metal impeller as is usual in other models. The mechanic related that he had performed about 25-30 identical repairs on bmws and that the problem was always attributable to the plastic impeller. I have had the water pump replaced with another pump with a metal impeller, but the event cost me $458 in repairs and approximately $265 for a rental car for the rest of the trip, as well as about $150 in unnecessary hotel bills. I plan to contact the manufacturer to request reimbursement of these costs, as I feel that the use of a plastic impeller over a metal one is a defective and negligent design. I still have the old water pump and the plastic impeller in my possession.