1995 BMW 525I recalls
There are 3 safety recalls on record for the 1995 BMW 525I, covering 752,180 vehicles in total across all the models in each campaign. Newest first.
All recalls
Engine and engine cooling: cooling system
- What is wrong
- Vehicle description: passenger vehicles. A malfunction or failure of a coolant system component, such as a thermostat, water pump, or fan belt, can result in significantly increased coolant temperature and system pressure. If the indications of a critical overheating condition is not noticed by the driver, it is possible that damage to, or failure of, a coolant system component could occur.
- Risk
- If a crack were to form or a seam were to separate in the heater core end piece, hot coolant could suddenly be expelled, increasing the risk of personal injury to a vehicle occupant.
- Remedy
- Dealers will install a new design radiator cap to control pressure and provide greater coolant overflow in the event of overheating.
Recall number 98V178000 · Recall details
Vehicle speed control
- What is wrong
- The cruise control and throttle cables are attached to the same throttle valve actuating lever at the throttle housing. It is possible that the plastic bushing on either cable could break due to environmental influences coupled with vibration. If the bushing breaks, the outer cable housing can separate from the bushing. In this case, during application of the throttle pedal without cruise control being engaged, the outer tube could catch on the edge of the broken bushing.
- Risk
- This could cause the throttle valve to remain partially open. It his were to occur, the car might not decelerate as expected increasing the risk of a vehicle crash.
- Remedy
- Dealers will install a spring steel clip on the outer tube of each cable in the area of the adjusting screw and plastic bushing. The clip is designed to prevent the outer tube from dislodging from the bushing.
Recall number 97V131000 · Recall details
Latches/locks/linkages: doors: latch
- What is wrong
- The double-lock feature can engage with occupants and the door/ignition key inside the vehicle.
- Risk
- The occupants of the vehicle would be unable to exit either from the doors or from the windows of the vehicle. Drive-away protection would prevent the engine from starting.
- Remedy
- Dealers will replace the general control module with one containing the revised software to permit window opening with the double-lock engaged and key in the ignition.
Recall number 94V219000 · Recall details
Questions about the 1995 BMW 525I recalls
How do I check if my 1995 BMW 525I has an open recall?
Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.
Do I have to pay for a recall repair?
No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.
How many recalls does the 1995 BMW 525I have?
3, covering engine and engine cooling, vehicle speed control and latches/locks/linkages.
VIN decoder
See the problems and recalls for an exact car
Buying a used 1995 BMW 525I?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history