2013 BMW 528XI engine problems

Filed Aug 24, 2026 · Electrical, Engine · TN

The contact owns a 2013 BMW 528XI. The contact received notification of the federal safety agency Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM). The contact stated that due to an unrelated failure with the steering column, the vehicle was towed to a dealer for service. The contact stated that the tow truck driver disconnected the battery prior to the vehicle being towed to the dealer. The contact stated that after the recall repair, the vehicle was towed to an independent mechanic, and the steering column was repaired. The mechanic reconnected the battery, and a message was displayed on the instrument panel. The OBD-II scanner associated the failure with the water pump. The contact notified the dealer of the message, and the dealer refused to service the vehicle after several attempts. The contact called three other dealers and was informed that the battery needed to be connected for the water pump recall to be serviced. The manufacturer was notified of the failure. The vehicle was not repaired. The failure was unknown.

Filed Jul 29, 2026 · Engine · IL

I am submitting this report to notify the federal safety agency of a safety‑related defect involving the BMW N20/N26 engine timing chain assembly. My vehicle experienced a sudden and complete engine failure at highway speed due to a timing chain malfunction. This failure occurred without warning and created an immediate safety hazard for my [XXX] son, who was driving at the time. Loss of engine power at speed eliminated the ability to accelerate, maintain speed, or safely maneuver, exposing him and surrounding motorists to significant risk. This issue is not an isolated incident. BMW has issued internal service bulletins acknowledging premature timing chain wear and failure in N20/N26 engines. Independent technicians, consumer forums, and numerous owners have documented identical failures, often occurring well before the expected service life of the timing chain. The nature of the defect—catastrophic engine failure without warning—presents a clear safety concern rather than normal mechanical wear. BMW has declined to provide assistance, stating that “there is nothing we can do,” despite the well‑documented history of this defect and its safety implications. The failure of a known defective component at highway speed is foreseeable, preventable, and materially compromises vehicle safety. I am requesting that the federal safety agency investigate this recurring timing chain defect in BMW N20/N26 engines, including: The frequency of sudden engine failures Whether BMW’s internal documentation reflects awareness of a systemic safety issue Whether the defect warrants a recall or other corrective action to prevent further incidents This failure placed a young driver in a dangerous situation and could easily result in collisions, injuries, or fatalities. I am submitting this report to help ensure that other drivers are not exposed to the same risk. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed Sep 8, 2025 · Electrical, Engine · NJ

My 2013 BMW 528i was serviced under recall 24V‑608 (Coolant Pump Electrical Connector / DME). After the recall was marked complete, the car developed several serious failures: Coolant Pump / Connector (Recall Item) – The dealer refused to replace the coolant pump even though the recall notice from the government includes both the pump and connector. Shortly after, the water pump failed completely, causing “High Temperature” warnings and putting me at risk of sudden overheating and breakdown on the road. DME (Engine Control Unit) – This was supposedly updated during the recall, but it failed to detect existing problems. Before the recall, I was never warned about issues with the turbo or oil leaks. Immediately after the recall update, the car started misfiring and showing drivetrain malfunction. The recall did not prevent or detect the failures as promised. Valve Cover Gasket (Oil Leak) – After the recall, a severe valve cover oil leak appeared, causing lean air/fuel mixture, misfires, and risk of fire. Oil leaking onto engine components is a known safety hazard. The dealer admitted the gasket leak existed but refused to cover it. Turbocharger / Wastegate – The DME flagged turbo wastegate actuator problems after the recall. The turbo cannot be ordered separately from the actuator, leading to very expensive repairs. Before the recall update, this issue was not visible, so I believe the recall software either failed to detect earlier or triggered worse conditions. Because of these combined failures, the car became unsafe to drive: misfires caused loss of power, overheating warnings increased risk of sudden engine shutdown, and the oil leak created a fire hazard. An independent mechanic later confirmed the water pump failure and valve cover gasket leak, which I had to repair at my own expense. I believe the recall defect (coolant pump connector / DME) caused or contributed to the damage of the water pump, gasket, and turbocharger. BMW and the dealer refused to rep

Filed May 20, 2025 · Electrical, Engine · MO

The contact owns a 2013 BMW 528XI. The contact received notification of the federal safety agency Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

Filed Apr 28, 2025 · Electrical, Engine · NJ

The contact owns a 2013 BMW 528XI. The contact received notification of the federal safety agency Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted and confirmed that parts were not yet available. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

Filed Apr 25, 2025 · Engine · VA

The timing chain became stretched so that the valve timing with the pistons had been altered so that a valve face almost hit the top of a piston(one more tooth on the intake camshaft gear would have caused an impact between the piston top and a valve face causing the motor to stall and cease operation thereby causing the vehicle to lose power and possibly control). A timing chain should not stretch so as to cause a strike between a valve face and the top of a piston. Either the timing chain was of inferior quality or the automatic tensioner was inadequate to take up the slack as the chain wore.

Filed Apr 22, 2025 · Electrical, Engine · CA

The contact owns a 2013 BMW 528I. The contact received notification of the federal safety agency Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

Filed Mar 27, 2025 · Electrical, Engine · CA

The contact owns a 2013 BMW 528XI. The contact received notification of the federal safety agency Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

Filed Jan 22, 2025 · Engine, Transmission · CA

-Drivetrain warning message was displayed, indicated to drive moderately, and moments later car sputtered and ceased to operate. Mechanic inspected and reported the timing chain failed and is to blame. Also, the engine may be impacted due to fraying parts that may have entered engine values over the course of time. Vehicle may be available for inspection for a short period of time (sold car to mechanic for very nominal amount). -My teenage daughter was driving the car when the above occurred and broke down on a busy highway. Thankfully, she avoided a collision. The police were called and the car towed. This could have been extremely harmful to both my daughter and the general public. -An independent mechanic diagnosed the issue and confirmed the issue. -The vehicle was not inspected by the manufacturer, police, or insurance. The manufacturer (BMW) did perform an extensive evaluation and repair of the coolant line approximately two months ago but did not mention this issue. -I believe the drivetrain warning displayed once or twice with a message to drive moderately. On recollection, this was after the visit to fix the coolant issue. -We purchased the car new in 2013, were the only owners, and I expected much more from BMW. We are very upset given the potential harm that could have occurred. Also, I have since read about a class action lawsuit impacting this very same issue and pertaining to our year, make, and model. We were not informed of this lawsuit, nor did we receive a recall notice for the defective timing chains in these models. I took a substantial loss on this vehicle as compared to its FMV had this not occurred.

Filed Jan 21, 2025 · Electrical, Engine · NJ

The contact owns a 2013 BMW 528i. The contact received notification of the federal safety agency Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.