2025 BMW 740I technical service bulletins
66 technical service bulletins and manufacturer communications cover the 2025 BMW 740I.
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- Due to an implementation error in various OBD diagnostics in the vehicle's control units, in very rare...
- When pulling on the hood (highlighted inorange in the top photo) release lever (highlighted in orange in...
- Moisture, condensation, and/or fogging are visible in one or both Daytime Running Lights (DRL) upper...
- Cracking” noise might be heard when turning the steering wheel from lock to lock
- This Service Bulletin provides instructions to clean the intake valves using the BMW Carbon Blaster Tool...
- This Service Bulletin provides instructions to clean the intake valves using the BMW Carbon Blaster Tool
- The coolant vent lines of the low-temperature circuit are designed to remove air bubbles from the system...
- During vehicle start-up the Secure Element (SE) of the BCP may fail causing communication errors
- The vehicle may experience various operational issues with Apple CarPlay Projected Modes such as: Dropped...
- Noises from the front axle when driving over rough road surfaces, or when turning.
- Situation
- Groaning” noise from the EPS when the steering wheel is at the end stops.
- When rolling forward or backwards with the steering at full lock (left or right) without the brake...
- Customers might report that washer fluid is leaking from the lower reservoir area, especially around...
- Program control units (OBD)
- After the software update to version …25-07-5XX, existing activation points for the “Automate My...
- Electrical system
- The vehicle may experience various operational issues with the infotainment system such as: Resets of the...
- Situation
- There is a matte “veil” or milky stain on theexterior mirror glass.
- A limited number of 48 (V) volt vehicle batteries may have been damaged during the manufacturing...
- One or both of the following faults stored in the DME: 034AA5
- RSU availability
- After the software update to I-level version …25-07-530, the Alexa app may disappear from the App Menu in...
- In some situations, an emergency call may be triggered in the vehicle without either the customer pressing...
- Compartment Trim Return
- Due to an assembly error the upper oil pan screws may not have been torqued correctly.
- Starting from I-level …24-07-500, it is possible that the Automatic Hold function is not automatically...
- Oil Drain Plug Return
- When the steering column is adjusted inwards towards the instrument cluster, the noise may occur near...
- Due to an assembly error, the valvetrain could have a mechanical failure.
- A 740i Sedan, 740i xDrive Sedan (B58N
- After replacing the Multifunctional Display (MFD), the Central Information Display (CID) is black
- Central Information Display (CID) in the vehicle is black or only displays “BMW”. The head unit (HU-H5) is...
- While opening any of the doors, a groaning sound is heard from the door brake
- A groaning sound from the front of the vehicle while driving can be heard, particularly while cornering
- Condensation is present in the inner surface in one or both (inner and/or outer) taillamps.
- Delivery stop: oil pan top screw connection
- After performing a cabin air filter replacement maintenance service task, or after a similar repair...
- The following air flap and/or air temperature sensor faults are stored in the BCP. 80114D
- After programming from the I-Levels between …24-03-505 and lower than …24-03-540 to I-Level …24-11-530 or...
- Emissions recall 25E-A02: program control units
- A loud “click”- type noise can be heard from the rear axle brakes when driving off forwards, and/or in...
- There is a jerking or shuddering during either or both of the following: Cornering or accelerating from...
- Customers may report that the Central Information Display (CID) side of the Multifunction Display...
- The Sky Lounge sunshade does not open/close
- As a result of a data input error, certain fault memories are permanently stored
- Swivel Joint Return
- The parking brake actuator cannot be activated or deactivated due to a failed weld
- There is a jerking or shuddering during either or both of the following: Cornering or accelerating from...
- A check control message is displayed, indicating that the parking assistance systems have...
- Parts of the steering shaft universal joint may have been joined together without having beengreased
- BMW Service Action
- Delivery stop: emf actuator
- Due to changes in the opening mechanism ofthe trunk/tailgate latch, it is possible that thetrunk/tailgate...
- Delivery stop: steering shaft universal joint
- If the Head-Up Display (HUD) is deactivated when Navigation View is selected, upon reactivation the...
- After the vehicle has been programmed with either RSU (Remote Software Update) or ISTA (I-Level...
- While opening any of the doors, a groaning sound is heard from the door brake.
- Heat Management Module Return
VIN decoder
See the problems and recalls for an exact car
Buying a used 2025 BMW 740I?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history