Check a VIN

2000 BMW X5 recalls

There are 6 safety recalls on record for the 2000 BMW X5, covering 152,432 vehicles in total across all the models in each campaign. Newest first.

All recalls

Air bags: frontal: driver side: inflator moduleReported October 31, 2025 · 5,361 vehicles affected
What is wrong
BMW of North America, LLC (BMW) is recalling certain 2000-2001 X5 vehicles that may be equipped with a sport steering wheel containing a Takata PSDI-4 air bag inflator. The inflator may explode during deployment due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature, and temperature cycling.
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the remedy is complete. Dealers will inspect and replace the driver's front air bag, as necessary, free of charge. Owner notification letters were mailed December 29, 2025. Owners may contact BMW customer service at 1‑800‑525‑7417. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on beginning December 23, 2025. This recall expands previous the federal safety agency recall number 19V015.

Recall number 25V748000 · Recall details

Service brakes, hydraulic: foundation components: hoses, lines/piping, and fittingsReported January 9, 2003 · 84,000 vehicles affected
What is wrong
On certain sport utility vehicles, it may be possible for the front brake line to slip out of the retaining bracket located at the front strut. The brake hose that is attached to the brake line could come in contact with the tire and be subjected to wear and abrasion.
Risk
This could initially cause some brake fluid leakage, and eventually lead to a substantial loss of brake fluid. There could be a noticeable reduction in brake performance if a loss of front brake performance occurs.
Remedy
Dealers will install an additional retaining clip to further secure the brake line to the front strut. Additionally, if inspection of any brake hose indicates that it has experienced damage, the hose will be replaced. Owner notification began february 14, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact bmw at 1‑800‑831‑1117.

Recall number 03V001000 · Recall details

Service brakes, hydraulic: pedals and linkagesReported July 24, 2002 · 34,860 vehicles affected
What is wrong
On certain passenger vehicles, due to a manufacturing problem, the brake pedal arm pivot shaft could loosen from its support bracket.
Risk
Eventually, the brake pedal arm could detach from the bracket, rendering the service braking system ineffective, increasing the risk of a crash.
Remedy
Dealers will check the brake pedal arm pivot shaft for proper seating in its support bracket. In addition, a pin will be installed to secure the shaft to the bracket. Owner notification began august 14, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact bmw at 1‑800‑332‑4269.

Recall number 02V194000 · Recall details

Service brakes, hydraulic: foundation components: hoses, lines/piping, and fittingsReported June 14, 2001 · 13,721 vehicles affected
What is wrong
Vehicle description: 4.4i sport utility vehicles. There is a plastic carrier to which the oil filter housing is attached. Oil supply and return lines are attached to the filter housing. Over time, this carrier could sag slightly. If this happens, one of the oil lines, which are armored with steel mesh, could come into contact and chafe a steel brake line located immediately underneath.
Risk
Continued chaffing can cause the anticorrosion coating of this brake line to fail, allowing the brake line to rust through and leading to loss of brake fluid, failure of the rear brake circuit, and extended stopping distances, and a possible crash.
Remedy
Dealers will install a rubber spacer below the plastic carrier to prevent sagging and subsequent contact between the oil and brake lines. Brake lines whose anticorrosion layer is found to be damaged as a result of contact with the oil line will be replaced. Owner notification began august 14, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact bmw at 1‑800‑831‑1117.

Recall number 01V195000 · Recall details

Power train: automatic transmission: park/neutral start interlock switchReported June 14, 2001 · 14,300 vehicles affected
What is wrong
Vehicle description: 4.4i sport utility vehicles. Over an extended period of time, abrasion particles could deposit on the electrical contacts within the switch, causing a disruption of the electric current through the contacts. If the disruption occurs when the vehicle is stationary with the transmission in the neutral or park positions, the transmission will switch automatically into the emergency program, which is displayed in the instrument cluster via a warning lamp and a message, "trans. Fail-safe prog." in this case, the vehicle can be driven in lower gears only with limited engine output.
Risk
If this problem occurs, the ability to maintain speed in traffic and/or accelerate could be greatly diminished, possibly leading to a crash.
Remedy
Dealers will replace the transmission gear position indicator switch. Owner notification began august 14, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact bmw at 1‑800‑831‑1117.

Recall number 01V196000 · Recall details

Steering: steering wheel/handle barReported January 18, 2000 · 190 vehicles affected
What is wrong
Vehicle description: sport utility vehicles. The lower steering shaft coupling includes a plastic collar which fits over the lower steering rack input shaft. This collar is pushed down onto the steering rack and tightened during assembly. On some of the affected vehicles, the collar may not have been pushed down fully onto the rack at the assembly plant.
Risk
Operation of the vehicle, especially in rough road conditions, can cause the clearance between the collar and the steering rack to increase to the point where the input shaft can separate from the rack, resulting in a loss of steering capability.
Remedy
Dealers will inspect the steering rack input shaft collar for proper positioning, and reposition is necessary.

Recall number 00V010000 · Recall details

Questions about the 2000 BMW X5 recalls

How do I check if my 2000 BMW X5 has an open recall?

Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.

Do I have to pay for a recall repair?

No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.

How many recalls does the 2000 BMW X5 have?

6, covering air bags, service brakes, hydraulic and power train.

VIN decoder

See the problems and recalls for an exact car

Buying a used 2000 BMW X5?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history