Can-Am Ryker won't shift problems

Filed May 27, 2025 · Steering, Suspension · VA

When entering a left hand turn at moderate speed, the vehicle will go into a lurching, bucking, hesitation period, usually when under slight or moderate acceleration. This results in an uncontrolled wobble that will eventually smooth out but can also result in a sudden burst of power that tends to rapidly propel the vehicle further to the left unless the throttle is quickly relaxed. Hard to describe, but the sensation feels like you are being “squirted” out of the turn. I first noticed this barely a month after I took possession of the machine and thought it might be a normal handling trait. As I became more acquainted with the various user’s groups, I find it was not normal and a much more serious problem that apparently hasn’t been successfully addressed by the manufacturer over the years it has been reported. Unlike some of the others who have reported similar occurrences, my vehicle has not displayed any error codes on the display screen, nor has it gone into a limp mode. Due to these conditions, I will not take this vehicle on any road trips for fear of being stranded or involved in an accident being caused by this dangerous handling anomaly. I love this vehicle, but due to this issue, I don’t feel it is safe.

Filed Oct 21, 2024 · Steering, Wheels · CA

Vehicle developed right wheel wobble on left turns over 90 degrees, when speed is ~40 mph or above. Unable to safely make turn, at speed. 3 trips to dealership, issue persists. Vehicle threw a “VSS fault” and went into “limp mode” preventing me from driving over 40mph - was in the mountains, 60 miles from home. Serious safety issue, feel unsafe on the vehicle, no longer willing to ride.

Filed Sep 14, 2024 · Steering, Suspension · AZ

Vehicle repeatedly goes in to limp mode for VSS faults related to steering codes. Dealers are unable to repair and report that many other of the same model have the same problem. Many other owners in the online community report the same issue with no fix in sight. The vehicle is essentially unusable and the manufacturer does not appear to have any intent to remedy the situation.

Filed Jun 27, 2024 · Steering · AZ

Bike intermittently goes into limp mode for VSS fault and codes related to the steering rate/yaw sensor. Had the problem confirmed and the manufacturer-recommended steering upgrade done by local Can-am dealer but the VSS fault and limp mode still happens, intermittently. My understanding, from reading forums online, is that this is a very common issue. I would rather they turn the VSS system off entirely than than have the vehicle be nearly unusable at random intervals. Getting slowed down to a max speed of 50 mph here in AZ where most of the highway speeds are 65 mph or higher, with no warning, is quite dangerous and nerve-wracking. I live right off of a 65 mph highway so driving a bike that randomly limits itself to 50 mph is not safe, let alone convenient.

Filed Oct 23, 2023 · Steering · PA

When making left turns the computer causes the left turn to become unsafe, a feeling in the steering line a flat tire, or otherwise causing over steering and can result in accidents due to the faulty computer system. Issue appears to effect many Can Am Rykers, it is a known defect per the dealers, and even through 4 years of production Can Am has failed to resolve this known issue. There is no solution or work around, except to put up with it. The vehicle stabilize computer system caused intermittent "limp mode" problems after or during the left turn also

Filed Oct 8, 2023 · Steering · CA

At approximately 5600 miles, my Can-Am Ryker went into limp mode during a ride, limiting my top speed to 50 mph on the highway. This unexpected and sudden occurrence put my safety and the safety of other road users at risk. Request for the federal safety agency Intervention: I am reaching out to the federal safety agency to request your immediate intervention in addressing this widespread safety concern with the Can-Am 3-wheel motorcycles manufactured by Can-Am BRP. It is crucial that this matter is investigated thoroughly, and necessary actions are taken to ensure the safety of riders and passengers who are at risk due to the malfunctioning Stability Control System and associated components. I kindly request that the federal safety agency: Conduct a comprehensive investigation into the safety issue described, including the YAW sensor, SAS system, and Stability Control System of Can-Am. Collaborate with Can-Am BRP to expedite the development and implementation of a reliable and effective solution to rectify the issue, ensuring the safety of riders. Consider issuing a safety recall or other appropriate actions to address the issue in all affected vehicles. The safety of riders and road users is of paramount importance, and I believe that the federal safety agency's intervention is crucial in ensuring that this issue is resolved promptly. Issue Description: The Stability Control System on my Can-Am 3-wheeler engages during low-speed left turns when it is not required, which leads to significant safety issues. This system does not engage in a similar manner during right turns of comparable speed and sharpness. When the Stability Control System engages on a left turn, power is unexpectedly cut to the rear wheel, and the right brake engages, resulting in a disconcerting "wobble," unsteadiness, and a sensation of jumping. This situation causes extreme unease and creates a sense of losing control over the vehicle.

Filed Aug 15, 2023 · Steering · TX

https:// [XXX] Mine went into limp mode. Right before getting on interstate. Drops to 25 right away. Very dangerous on 65 mph highway. Back wheel wobbles when I make a turn doing around 45… INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed Aug 13, 2023 · Steering · OK

My Ryker has developed the Yaw SAS fault codes C006C & C0063C being excessive play in steering components. It is a very wide known problem causing the trike to go into limp mode with no consumer fix without a dealer getting involved. This comes down to a poor designed bushing on the SAS sensor that fails due to turning stress on it. I am aware of the TSB 137209 which is also on my list of repairs. I have about 5600 miles on it when the trike went into limp mode leaving me with a top speed of 50 mph on the highway. This forced me to finish my 45 minute trip home at a very unsafe speed on the highway as I had no way to have it towed home> I will now have to find a way to a dealer thats over an hour away just to get a quote on the repairs as they are the only affordable way to clear the codes after repairs are done

Filed Aug 13, 2023 · Steering · VT

My vehicle start to lose control when I drive around left or right corner the rear end felt like it was bucking or slipping. The VSS fault error and Limp Mode kicked in and the speed doesn't really matter once you are over 20 mph. My vehicle is at the dealership as of 8/13/23 to replace the pitman arm to see if that fix the problem. The VSS fault error happens about 4 times since I brought the vehicle.

Filed Aug 6, 2023 · Brakes, Steering · MD · crash

I have a 2022 Can-Am Ryker 900 sport. when I purchased it around a week or two later, my left brake and wheel started squeaking loud. I returned it to the dealer. One of the service men said its brand new brakes and tires give it time to wear down.low brake warning came across the screen and my handlebars started feeling loose,a lot of play. I returned it again. They checked my handlebars and fixed my front truck and said my brand new brakes were fine. It wasn’t my handlebars. It was my suspension starting to malfunction making my left brake pad wear uneven low brake warning came across again. I returned it again for the recalls the service man assured me this will fix my problem. last night August 5,2023 I was out, riding with friends, proceeded into a curve, and my handlebars would not allow me to turn my wheels. My left wheel seemed as though it was trying to lock up. I could not turn the curve.it started to do what they call the Death turn. Two of my friends almost ran into the back of me because the bike slowed itself down, My check engine light started flashing VVS fault code came across the screen, I end up hitting the curb scratching my rim, and now the bike is on limp mode.