Check a VIN

1997 Carpenter School Bus problems

The most common problem on the 1997 Carpenter School Bus is seats. It has 3.0 times the complaints of a typical School Bus model year.

Typical year3.0x the typical complaints
Owner complaints
12
Recalls
0
Worst area
Seats

The worst 1997 Carpenter School Bus problems

Ranked by number of owner complaints. Mileage and cost come from what owners wrote.

  • Seats
    7
  • Acceleration
    4

Problems by type

Tap a problem to see which part fails, at what mileage and in which other years.

  • Seats
    7
  • Acceleration
    4

Recalls

No recalls on record for this model year.

Defect investigations

Inadequate welding quality control seatsOpened August 31, 1998, closed December 3, 1998

EA98020

Cracking of roof support structureOpened June 8, 1998, closed December 16, 1998

There is no summary currently available

PE98036

Inadequate welding passenger seatOpened April 27, 1998, closed August 31, 1998

Operators of affected buses have alleged two issues relative to inadequate welding quality control in the contruction of the passenger seats:1) spot weld failure between the seat back pan (sheet metal) and frame; 2) inadequate weld finishing below the seat bench resulting in children being exposed to sharp edges.

PE98027

What 1997 Carpenter School Bus owners say

Most recent owner complaints, unedited.

Filed May 10, 2000 · PA

Overhead compartment which is mounted along the left side of the school bus at driver's seat is not padded as required in title 67, chapter 171, section 171.58 " the school bus and school vehicle equipment standards." this overhead compartment is situated in a matter which could cause death or serious injury to the occupant of the seat located immediately behind driver due to lack of protectiv epadding on sharp corner of compartment.

Filed Oct 29, 1999 · Acceleration · OH

Design location of the throttle cable is causing chaffing against the housing resulting in the throttle pedal sticking to the follor. Yh

Filed Oct 29, 1999 · Acceleration · OH

Design location of the throttle cable is causing chaffing against the houseing resulting in the throttle pedal sticking to the follor. Yh

Filed Oct 29, 1999 · Acceleration · OH

Design location of the throttle cable is causing chaffing against the houseing resulting in the throttle pedal sticking to the follor. Yh

Filed Oct 29, 1999 · Acceleration · OH

Design location of the throttle cable is causing chaffing against the houseing resulting in the throttle pedal sticking to the follor. Yh

Filed Mar 30, 1998 · Seats · OH

Seat backs coming loose due to weld failures on several seats.

Filed Mar 13, 1998 · Seats · OH

Back section of the bus seats began to break loose at the base.

Filed Mar 13, 1998 · Seats · OH

Back section of bus seats broke loose at the base.

Filed Mar 13, 1998 · Seats · OH

Back section of bus seats broke loose at the base .

Filed Mar 13, 1998 · Seats · OH

Seat backs broke loose at the base .

Compare the 1997 Carpenter School Bus

Other model years

1994199519961997

Questions about the 1997 Carpenter School Bus

Is the 1997 Carpenter School Bus reliable?

Owners have filed 12 complaints about the 1997 Carpenter School Bus, 3.0 times a typical School Bus model year.

What is the most common problem with the 1997 Carpenter School Bus?

Seats, with 7 complaints. Next is acceleration (4).

How many recalls does the 1997 Carpenter School Bus have?

No recalls on record.

Share your experience with the 1997 Carpenter School Bus

Tell other buyers what went wrong and what it cost. We review every report before it appears, and we never publish names, emails or VINs.

No names, contact details or links. Reports about a dealer or a person are not published.

VIN decoder

See the problems and recalls for an exact car

Buying a used 1997 Carpenter School Bus?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history
Is this car on a recall?Check VIN