Check a VIN

1994 Chevrolet Astro suspension complaints

Page 2 of 2: complaints 11 to 40 of 40, newest first, as owners wrote them.

See the summary of 1994 Chevrolet Astro suspension problems: which part fails, at what mileage and related recalls.

Filed Nov 5, 2001 · Suspension · IL

Mechanic advises torsion bar shattered. Could have caused fatality if it had happened at highway speed.

Filed Oct 17, 2001 · Suspension · IL

Torsion bar shattered, collapsing left front of car; could have been fatal accident if it had occurred at highway speeds.

Filed Oct 9, 2001 · Suspension · WI

Torsion bar failure took place in the area of the bushing in the torsion bar arm located in the frame crossmember. This was a known defect by chevrolet who stated they know of this problem thru the 1998 model year. The new repalcement parts are of a different design. The event occured the moring after I returned from a trip that was predoninately interstate driving and the component failed as I was entering the vehicle which was parked in my driveway at the time. However had I been on the interstate at the time of the failure I'm sure I would have lost control of the vehicle. When I questioned the dealership where I had the repairs done if they had seen this before they stated they had and "it wasn't a pretty picture".

Filed Sep 19, 2001 · Suspension · NY

Drivers side torsion bar broke while van was parked in a parking lot. My wife had just driven 50 miles on the nys thruway at 65 MPH in morning rush hour traffic with her boss in the van going to a nursing conference. They parked the van in a parking lot and when they returned 2 hours later they found the van drivers side down on the front tire. I would hate to imagin what could have happened if this had happened in rush hour traffic. Would it have even been recognized as the cause of an accident? I have just finished reading the 22 other reported incidents and agree with all the rest that this is a manufacture defect in either the bar or the engineering design. When the dealer repaired the broken unit he said it was suggested by gm to replace both bars, the f-support "a" and arm. We were told that the support was required due to a design change, at a cost to us of $859.00 . It is very appearent to me that gm has recognized the problem, changed the design to remedy the problem and past the cost and the very possible injury on to the public. That I undestand , what I don't understand is why this organization, the federal safety agency, has not pursued gm for a recall on this item, I am very suprised. Thanks for the space [email protected].

Filed Aug 7, 2001 · Suspension · WI

While traveling at approximately 20 to 25 MPH front left torsion bar broke. Dealership has examined vehicle, and was replacing both frontal torsion bars. *ak

Filed Aug 6, 2001 · Suspension · WI

Front left torsion bar broke while the vehicle was parked in garage.

Filed Aug 4, 2001 · Suspension · WI

Left front torsion bar broke while driving 30 MPH. Fortunately this did not happen at a higher speed. Drivers side front of vehicle collapsed to nearly touch the tire. Had the right side torsion bar replaced as well, at the recomendation of the service station because of a known problem with these parts. Why wasn't I notified by chevrolet? This seems to be a potentially dangerous condition.

Filed May 22, 2001 · Suspension · WI

Passenger's side torsion bar snapped in half while backing out of a drivew car collapsed on top of tires. Consumer felt lucky this did not happen on freeway.

Filed Feb 28, 2001 · Suspension · WI

On the morning of 5/14/99 my daughter went out to the garage to start the van and saw that the front of van was hanging over the left front wheel and rubbing on the tire. She called me over to see what was the problem. The left front torsion bar snapped and broke causing the body to fall over the left front wheel, also my daughter at time was 7 months pregnant, and very concerned about what would happen if she had been driving when the torsion bar broke,causing the body to fall over the tire,and she wouldn,t have been able to steer the van out of danger. I called the chev. Garage to come pick up the van because you couldn,t steer it. After they confirmed what the problem was,we asked if this was safety problem they said no. We asked how many torsion bar have they found like this, the said none, than wouldn,t you think that they would look in to torsion bar as being defective,but they said need more than one problem like this to investigate. I called chev motor company and the said almost the same thing. Well we thought they would be interested, but no one as called or sent any infomation, my daughter and husband had to paid fo repairs, also we found out that number for the torsion bar has been changed and that they had to replace both bars with new design brackets,we found this to be kind of suspicious. I hope that there was no one driving the same type van. And had a torsion bar break causing a accident or death. Thank you for letting me get rid of some my concerns. Thank you again, ed langenberg 610 ravenswood dr. Green bay, wi 54302, 920‑468‑8709, email [email protected].

Filed Sep 20, 2000 · Suspension, Transmission · PA

Torsion bar broke while driving @ 30mph ($400), lft torsion bar broke in driveway ($364), "clunk" in rear while accelerating from stop and occasionally while shifting (high/low gear in differential unit-$1500), 9 mos later the "clunk" is back. Mechanics says disconnect drive train from rear to make van 2wd

Filed Sep 5, 2000 · Suspension · PA

I drove the auto to work, came out at break, and found the front end crooked. Something had broken up front. Under further checking I see the torsion bar, on the left side was broke. I wanted to get an estimate of repair, when I contacted a place in erie, called dias spring, they said they had repaired several vehicles with the same problem in a weeks time. What I would like to know, is it seems there is a manufacturer problem that exists, on these front ends. Are you going to update my auto so I don't have to pay the extreme high costs of repair. Auto salvage yards in our area claim big rushes on getting people these parts, it seems to me there is a problem that has to be addressed here. Too many people have had the same problem as we. Please confirm my inquiry.( dot number: tire size: 2251675r15 )

Filed Sep 1, 2000 · Suspension · OH

Consumer heard a big bang, next day van was leaning to the left, torsion bar cracked or failed, which indicated that there was no suspension on the left side of the van.

Filed Aug 26, 2000 · Suspension · MI

Vehicle experienced a front torsion bar broke, while pulling out of a driveway; dealer / mfr's was not contacted at this time. Please provide any further details:

Filed Aug 10, 2000 · Suspension · WI

The torsion bar broke on my van less than 15 miles after returning from a vacation to the mountains. My mechanic informs me that the parts are back ordered and almost impossible to locate because this is such a common problem with this vehicle. My brother who works in the parts department of a large automobile dealership confirms that this has been a common problem. I want gm to stand behind the repairs. If this had happened several days earlier in the rocky mountains I would have had a great deal of inconvience ( best case scenario) or my family and myself could have been placed in danger because of losing control of the vehicle on a mountain road (worse case scenario). If this is a common problem, gm needs to stand behind it!

Filed Jul 18, 2000 · Suspension · OH

The vehicle was backing up when the left front torsion bar fractured. The body came down on the lower 'a' frame stop. The turning radius was reduced to create some major concern. I have talk with gm and no recall campaign is currently active for this vehicle. But, gm has done a redesign on the torsion bar assemblies. They recommend replacement of both torsion bars and adjusters to a new design they have shortened the torsion bar to give it less twist. My concern is the drivability of the vehicle upon lose of suspension. Please let me know if others are having the same complaint.

Filed Jul 11, 2000 · Suspension · WI

When driving 20-25 MPH torsion bar broke off on both left and right hand side at the crossover member, causing the vehicle to fall to the ground. Consumer has contacted the dealer. *ak

Filed Jun 15, 2000 · Suspension · IL

Torsion bar rod broke, thankfully while sitting in garage, was not rusted nor had any trauma or accident to cause this major failure that could have killed my family had we been driving when it happened.

Filed May 9, 2000 · Suspension · MI

While on expressway and pulling a trailer support bar snapped off. If going down a curvy road, vehicle could go into another lane. Consumer feels it's a design problem.

Filed May 8, 2000 · Suspension · MI

While driving about 50 MPH torsion bar broke, causing the right front side of the van to drop down on the tire. Dealer was notified about the problem. The problem has not been corrected. Please provide any further information.

Filed Apr 29, 2000 · Suspension · CT

We had just got off the freeway when the bar broke! The right hand torsion bar was close to beaking.

Filed Sep 2, 1999 · Suspension · PA

While driving approximately 20 MPH, the torsion bar spring broke. #ie98048- part is not available at dealer. Informed by mechanic its on back order. Had no problems with torsion bars on astros before.

Filed Jul 20, 1999 · Suspension · NY

Torsion bar on the driver's side broke, which causing vehicle to collapse.

Filed Jun 16, 1999 · Suspension · MN

Torsion bar broke while driving on street at approx. 30 MPH. Vehicle inspected by dealer shop, and informed consumer that the original torsion bar has been redesigned, and that both torsion bars and supports would need to be replaced. Also, redesigned torson bars are on national back order. No reason was given for the new design. Could the federal safety agency provide additional information, and help in this matter.

Filed Jun 16, 1999 · Suspension · MI

Left front (driver side)torsion bar snapped, dropping the body down onto the wheel, rendering vehicle undrivable. This is potentially a very serious defect. At highway speeds this incident would cause total lose of control. I talked with service mgr, and was told this is common failure/defect. He currently has 2 of these vehicles waiting for parts. Gm is awair of the defect, but, has not put it into recall status yet. I was very lucky, I was parked when the torsion bar broke. How many accidents have been caused by this defect, as opposed to looking like the torsion bar broke because of an accident. This is not a dealer problem, it is a manufacturer problem. Part defect.

Filed May 14, 1999 · Suspension · WI

Torsion bar broke, causing vehicle to fall down on all the tires. Consumer reported problem to dealer.

Filed Sep 4, 1998 · Steering, Suspension · NJ

Idler arms and ball joints break frequently. When problem is fixed, it returns frequently. Dealers are aware of the problem.

Filed Apr 30, 1998 · Suspension · VT

While driving at 10 MPH both torsion bars broke. Van was towed to dealership. The torsion bars have not been replaced because parts are not available at this time.

Filed May 29, 1996 · Suspension · NY

Vehicle pulls to right every time brakes are applied.

Filed May 23, 1996 · Suspension · CA · crash · 3 injuries

Driving vehicle, making turn, bus hit & lift vehicle in air, vehicle slid, doors had no inside knobs, driver & passengers trapped, doors opened from outside.

Filed Oct 17, 1995 · Body, Brakes · NV

Michelin tires had no traction, causing vehicle to lose control

VIN decoder

See the problems and recalls for an exact car

Buying a used 1994 Chevrolet Astro?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history