Dt*: the contact stated that while driving 35mph, the brake pedal was depressed in a normal braking situation. The ABS did not engage, therefore the stopping distance was extended. The vehicle was taken to a private repair shop, where the mechanic determined that the ABS system had malfunctioned. There is a the federal safety agency recall #99v193000, pertaining to the hydraulic antilock brakes. The vehicle was not included in the recall due to the VIN.
1993 Chevrolet Blazer: ABS light or ABS activating
180 of the 510 complaints about the 1993 Chevrolet Blazer describe ABS light or ABS activating.
- owner complaints
- 180
- of this car's complaints
- 35%
- typical mileage
- 150,000
- recalls
- 1
ABS light or ABS activating by model year
What owners say
I baby my truck and now I am unsure I want another chevy/gm product I am handicapped and my truck completely lost all power on a off ramp I had to coast and slam into park as I had no brakes or stearing obviously ps wasnt working or ABS, then had to spend now over $1,500 to even find the problem I believe it is the egr valve , motor will turn over just not start
Took the vehicle to dealer on a recall for ABS brake failure. Prior to taking the vehicle in the brakes were not defective. They locked up and then failed altogether.
Abs brake failure - after going over a bump or railroad track when coming to a stop there is a grinding noise on the driver's side and when brakes are applied pedal will go to the floor. Pumping of the pedal will not get the pedal height back. The brake pedal will continue to go to the floor for as many times as I apply the brakes. After vehicle is parked for half a day or longer, the pedal will return to a high pedal and everything seems okay. This condition has happened twice so far.
Consumer complained about an ABS brake problem.
When depressing the brakes with force left front wheel locked in place, resulting into extended stopping distance. Dealership replace ABS sensor.
While traveling at unknown speed consumer noticed ABS indicator light flashing. Vehicle was serviced, but dealer was not able to identify the cause.
On february 22,03 vehicle was repaired due to recall on ABS brake system, when we picked up vehicle front axle was engaged full time, feb.22-03 return for repair when returned random brake failure returned and told bearing problem , ??? March 4-03 took to another dealer. Told computer problem. Disconnected ABS for safety reasons. I have been told of other incidents on same make and models.
After immediately purchasing vehicle, consumer complained about the poor braking system, the dealer checked the system and stated everything was ok, a year later consumer complained about the brakes, after having some near collsions and also having a collision with a deer that caused considerable damage, the problem was that no matter how much force consumer applied to the pedal, after the initial application, the vehicle would not change its rate of speed, however consumer later received a recall notification (c99046) on the ABS, and the brake module was then replaced, consumer states the brakes seem to have normal braking, but when the brakes are applied the tires leave the road surface,like hitting a pot hole, the pedal drops down about two inches and the braking effect is reduced by what seems about one half the force on the pedal.
Abs brake warning light remains illuminated, indicating a malfunction within the system, cause unknown. Dealer cannot identify the problem.
Abs light is on. When applying brakes pedal feels like it's pushing back, in all road conditions. *ak consumer states while pressing on the brakes they seize up and seem to lock, vehicle swerves to the left and brake pressure lets go and vehicle lunges forward, wet pavement conditions are worse, rotors, calipers, ball joints, hoses, and belts have been replaced in order to correct problem, however problems still exist, a dealer replaced the switch which did not change any problems, there is a recall, 99i006, regarding this however, vehicle was not included and consumer feels it could correct braking problems.
Recall 99v193000 was fixed by dealer to correct ABS brakes. However, on november 1, 2000 after recall was fixed, ABS brakes failed again, causing consumer into an automobile accident. Driver received serious injuries. Vehicle was a total loss. Please add additional information.
Service bulletins that may apply
Related recalls
Service brakes, hydraulic: antilock/traction control/electronic limited slip
- What is wrong
- Vehicle description: certain 4-wheel drive pickup trucks and sport utility vehicles equipped with ABS (antilock braking system) manufactured from september 1989 through august 1996. Under certain driving conditions the switch which signals the ABS system whether the vehicle is in 2-wheel or 4-wheel drive can malfunction causing increased stopping distances during ABS stops while in the two-wheel drive mode.
- Risk
- If this occurred at a time when minimum stopping distance was required, a vehicle crash could occur without prior warning.
- Remedy
- Dealers will replace or repair the 4-wheel/2-wheel drive switch.
Recall number 99V193000 · Recall details
Questions about the 1993 Chevrolet Blazer abs
Is ABS light or ABS activating a common problem on the 1993 Chevrolet Blazer?
180 of 510 owner complaints about the 1993 Chevrolet Blazer (35%) mention ABS light or ABS activating. The model year with the most reports is 1995.
Is there a recall or service bulletin for this on the 1993 Chevrolet Blazer?
There is 1 recall and 1 service bulletin for the same area of the car. Check them below with your VIN.
Other symptoms on the 1993 Chevrolet Blazer
Brake failure 122Stalling 14Wipers 11Grinding brakes 8Fire or smoke 8Fuel pump 7Adaptive cruise 6Loss of power 6Engine failure 5
VIN decoder
See the problems and recalls for an exact car
Buying a used 1993 Chevrolet Blazer?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history