When applying the brakes on gravel front wheels locked ,up and the vehicle slid. Dealer has not seen vehicle.
1993 Chevrolet Blazer brakes complaints
Page 4 of 14: complaints 71 to 100 of 376, newest first, as owners wrote them.
When applying the brakes pedal gets an inch from ther floor before it stops. The owner has to add excessive pressure to brake pedal in order to stop. Dealer has seen vehicle.
The air filter cover broke . Yh
In an emergency stop ABS braking system malfunctioned, causing extended stopping distance, and brake pedal went to the floor. Dealer could not determine the cause of the problem. Please provide further information.
Vehicle has been exeriencing problem wth brake system: whenever brake are applied intermittently the pedal would be hard while pressing down, and causing extended stopping distance. Dealer / mfr. Notifed.
Intermittently when the brakes are applied pedal goes to the floor, resulting in extended stopping distance. *ak the customer received recall notice and some parts were replaced as the result. After repair customer read an article regarding the concurring problem with the antilock brakes (99v‑193).
When applying brakes pedal went to the floor, and vehicle did stop with increased distance. Afterwards, brakes locked. Had not seen dealer os of yet.
When applying the brakes vehicle slows down, then releases and slows down again. Dealer says there is nothing wrong with the vehicle.
Due to a defective egr valve, vehicle stalled and drove rough which could have resulted in a crash. Eger was already replaced on a recall. Also, brakes worke dpoorly, and check engine loght came on/off.
While driving a t approximately 40mph & applied brakes. Vehicle hit a bump in road & ABS braking system released. Took sometime before brakes grabbed back. Had the front ABS brakes repaired by dealer. But problem with brakes still exists.
Intermittently when the brakes are applied pedal becomes hard and brakes grab, resulting in extended stopping distance. The dealer has been notified.
While traveling on wet pavement and making a sudden stop by depressing the brakes to the floorboard, resulting in extended stopping distance. Dealer has been contacted. Please provide further information.
Anti lock brakes experience intermittent sliding. Mjs
No summary.
Have had dealer check out ABS system , they said it was a computer failure , they have reset system a number of times , problem repeats.
Abs system is working intermittently, and when applying the brakes, brake pedal is very hard, resulting in extended stopping distance.
While driving at 35 MPH applied brakes and the left front brakes grabbed, causing the vehicle to spin around and rear end another vehicle. Consumer has contrac dealer 6 times, and the dealer couldn't resolve the problem.
Ongoing problem on ABS system;while applying the brake pedal, it must be applied hard to get vehicle to stop. Also vehicle experienced extended stopping distance. Dealer notifed and informed consumer that nothing could be found. Can the federal safety agency help in this matter.
When applying the brakes vehicle has a delayed stopping performance. Dealer has vehicle currently.
When applying the brakes pedal goes to the floor, and the vehicle does not stop. Dealer has not seen vehicle.
While driving over a bump consumer tried to apply the brakes and the pedal went all the way to the floor. Consumer stopped by hitting the sidewalk.
When applying brakes on wet surface, pedal goes to the floor causing vehicle to not stop. Owner has to reapply the brakes in order to stop. Dealer says it's normal.
Consumer was driving at 30 MPH and applied the brakes, the ABS system kicked in, and brakes went straight to the floorboard. Vehicle did a 360 turn about which caused the vehicle to run into some bushes.
The ABS brakes failed resulting in accident.
Abs brake problems; when applying the brakes, the pedal goes to the floor, the system makes a noise and the truck does not stop right away. This happens on dry road conditions but more on wet road conditions. The problem will be reported to the dealership.
The brake pedal became hard while stopping on a wet surface, causing extended stopping distance, and resulting in a collision. Manufacturer and dealer will be notified.
When ABS brakes were applied, vehicle failed to stop right away. Had brakes checked at dealership and was informed they were working fine. Later, rearended another vehicle due to brake failure. Afterwards, consumer was again informed brakes were fine, and had plenty of space & time for stopping. *ak
When ever brakes are applied the vehicle would experience extended stopping distance. Inspected by dealer and nothing could be found. Seeking help from the federal safety agency in this matter.
While driving and attempting to stop on wet pavement brakes failed, causing consumer to hit another vehicle. Dealer was contacted and stated there was no problem.
All upper / lower ball joints needed replacing due to exessive wear. Consumer was informed that it's a service issue. The brake pads were completely worn out / front torsion bar needed replacing due to cracks & one was missing.
VIN decoder
See the problems and recalls for an exact car
Buying a used 1993 Chevrolet Blazer?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history