My ABS brakes were locking while driving and made it very difficult to stop car which required repeated stomping on brake pedal. Dealer repaired front hub bearings and sensors to correct problem. Dealer or gm does not consider this a safety issue even though this made it difficult to stop vehicle and also common problem with this vehicle. Cost to repair was at owners expense.
2006 Chevrolet Equinox brakes complaints
Page 4 of 4: complaints 71 to 85 of 85, newest first, as owners wrote them.
Tl*the contact owns a 2006 chevrolet equinox. The contact stated that while driving at various speeds and attempting to accelerate, the vehicle would start to slow down. No warning lights illuminated on the instrumental panel. The vehicle was inspected by an independent mechanic who informed the contact to disconnect the electronic braking control module. The vehicle was repaired. The failure mileage was approximately 60,000. The VIN was unavailable.
Own a 2006 chevy equinox and when braking or attempting to stop the vehicle I have to press on the brakes very hard. I can feel the brakes pumping (ABS system) and making a rattling noise when trying to stop and the aba and track lights stays on.
Driving 2006 equinox and the brakes were not working properly. The brakes did not press down and seem to be stuck.
On my 2006 chevrolet equinox, the ABS and traction control (tc) warning lights on the dash are on, and the brakes intermittently and frequently will not work, especially at slow speeds. They pulse and the car does not slow, until the brakes pedal is pushed to the floor. The garage has replaced the front wheel bearings twice, the ABS control module, the struts, and also rotated the tires, and the problem persists. The diagnostic tester indicates front left wheel bearing. I see on the internet that this s a widespread and persistent problem on the chevy equinox. We still haven't figured out how to fix it permanently.
Tl*the contact owns a 2006 chevrolet equinox. The antilock brakes failed indicating that the sensor was corroded and began to make a grinding sound when coming to a stop. The vehicle was taken to the dealer who replaced the ABS and hub sensor. The manufacturer was notified and informed her that there was no related recall and that the vehicle could be repaired under the warranty after she paid the deductible. The failure and current mileages were 55,000.
Tl*the contact owns a 2006 chevrolet equinox. While driving at 55 MPH, the contact depressed the brake pedal and felt an extreme pulsation. The vehicle was taken to an authorized dealership where the front rotors were resurfaced. The failure occurred again after 20,000 miles and the front rotors were once again resurfaced. The failure occurred a third time and the vehicle was taken back to the dealership; the dealer wanted to resurface the front rotors again. The contact refused as the resurfaced rotors only functioned properly for about 20,000 miles before they failed again. He called the manufacturer who offered no assistance. The failure mileage was approximately 20,000. The current mileage is approximately 66,000. Updated 7/26/10 *cn updated 07/29/10
As the vehicle is approaching a stop sign or stop light while braking the vehicle will get down to about 5mph or less and then the anti lock brakes will engage. This first started happening in parking lots at low rates of speed and I first thought it was possibly ice on the ground but as it is warming up and the roads are clear the problem is more persistent. The vehicle should be stopping and there is no reason for the anti lock brakes system to be coming on. The vehicle should be finishing coming to a complete stop not starting to pump the brakes.
Tl*the contact owns a 2006 chevrolet equinox. She heard a loud noise when she pressed on the brake pedal and the pedal extended to the floor. To release the pedal she had to press it rapidly several times. She has experienced brake failure for several months. The dealer diagnosed the brake failure on three occasions. The dealer replaced the brake pads and some related switches; however, she does not remember the name of the switches that were replaced. Report number 71764846662 was filed with the manufacturer and they stated that someone would contact her. The failure mileage was 36,000 and the current mileage was 39,700.
Front brake rotors bad at 50,000. Problem started at 25000 miles on the vehicle. Took to authorized gm dealer and they stated that the warranty does not cover rotors even though this seems to be a common issue on this vehicle. When the brakes are pressed the brakes pulsate and the vehicle pulls to the right.
On 2/29/2009 ABS system started to activate around 10-15 MPH with or without brake pedal being depressed. This occurs all the time while moving forward or reverse. Vehicle is 2006 chevy equinox with 27,500 miles.
Tl*the contact owns a 2006 chevrolet equinox. While driving approximately 30 MPH on normal road conditions, the brake pedal pulsated when it was depressed. The front end of the vehicle began to shimmy. The vehicle unexpectedly pulled to the right without assistance. There were no warning indicators illuminated on the instrument panel. The vehicle was taken to an authorized dealer for inspection and they resurfaced the rotors. On six separate occasions, the vehicle was taken to an authorized dealer for identical failures, but there were no resolutions. The repair consisted of resurfacing and replacing the rotors. The vehicle has not been repaired. The failure mileage was 18,287 and current mileage was 52,000.
17 trips to the dealership for repeated problems with brakes, rotors, bearings, transmission, clicking/other sound in engine compartment not fixed as of yet by gm, broken door hinge, broken license plate bolt receivers, starter, seat belt clip, air conditioner, remotes, noises in front end, engine miss, clunking when wheels spun on wet pavement.
(1) on or about 10/27/06, alarm system deactivated itself, interior and exterior lights turned on, doors remained locked. (2) on 11/01/06, alarm system activated itself, doors locked themselves. (3) on 11/27/06, vehicle shuttered and went into 'limp' mode which may have caused damage to the transmission. Onstar and dealer retrieved the following error codes: (I) p1626 - theft deterrent fuel enable signal lost, (ii) c0276 - traction control not allowed (TCM / ABS), (iii) u0100 - lost communications with transmission control module (TCM), (iv) u2105 - lost communication with engine control module (ECM). Between 11/27/06 and 12/21/06, dealer supposedly replaced bcm three times and 3rd new bcm fixed problem. Each new bcm would go to zero (0) and the mileage could not be programmed. During that time the theft deterrent system was deactivated which was unknown to me. Current mileage is incorrect. I believe that the original faulty bcm may have been re-installed and the codes cleared when they were unable to fix the problem. I do not believe that the other none-bcm error codes have been addressed but the dealer forced me to take my vehicle home on 12/21/06.
Brakes and rotors were bad at only 1,200 miles from factory. Dealer wanted to just machine them down to fit but I made them replace them. Had both kids in car and car would not stop because of faulty brakes and rotors from factory.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2006 Chevrolet Equinox?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history