1996 Chevrolet K1500 brakes problems

Filed Dec 18, 2003 · Brakes · 82,000 miles · OH · crash

Upon making a left turn brakes locked up, consumer lost control of vehicle and went into a ditch. This was due to the brake rotors breaking and jamming into the brake. This failure was caused by poor design of the rotors, per the dealership.

Filed Jan 30, 2003 · Brakes · 57,000 miles · OH

Abs brake failure

Filed Apr 8, 2002 · Brakes · MI

My ABS brake system comes on under 10mph during normal braking. There is no panic stop involved during the normal braking event. This situation is becoming very troublesome and I'm worried as to whether I'll be able to pull my travel trailer.

Filed Mar 11, 2002 · Brakes · NY

The hub of the brake rotor became separated from the rotor during vehicle operation. This resulted in a severe vibration, loud grinding noise and a partial lose of control during braking. When the brakes were applied, essentially, one of the calipers was rendered inoperative as the disc it clamps on had separated from the hub. The hub is sheet metal welded to the disc vs. A complete casting as has been previously the standard for this part. Weld failed resulting in the catastrophic failure of this critical brake component. Additionally, had this failed at speed, it is unknown what other damage may have resulted to the braking and/or steering systems.

Filed Mar 24, 2001 · Brakes · FL

Don't know the date of or mileage at failure! No safety defec tmentioned.

Filed Feb 20, 2001 · Brakes · AK

When making a firm stop (not panic) when tires pass over a ridge on dry road surface, pass over a sewer cover (or any kind of road irregularity) ABS activates at approx 20mph or less.braking forces lessens for about one truck lenght and pedal vibrates a little. It seems like ABS stays on even though the road is dry and smooth. Load in the bed is about 400lbs, tires are good, brakes are clean. Dealer did not want to go for test drive...said there may be a recall for this. Truck has been at dealer about a dozen times the first year and a half for rear brake pulsation and lock up. Went to arbitration..."performing as designed' even though 4 drums and 6 pairs of shoes replaced . Cover.

Filed Feb 15, 2000 · Brakes · MA

When brakes are applied, the brakes become weak, resulting in extended stopping. Distance, brake system is weak, too much pedal effort.

Filed Dec 13, 1999 · Brakes · VA

Stepped on brakes and left front rotors broke loose from its' hub, causing a severe reduction in braking, and a hard pull to the right. Brake shop says they've never seen this before. Also, right front rotors appear to have stress cracks at rotor/hub juncture. Contacted general motors, no satisfaction.

Filed Sep 23, 1999 · Brakes · CO

No summary

Filed Sep 15, 1999 · Brakes · NC

Due to defective brake booster, the braking system malfucntioned, causing extended stopping distance which may result in a crash. Dealer replaced the brake booster.