Ea94-038; in wet conditions the defective ABS system malfunctioned, causing the wheel to lock up and the ABS light stayed on which caused extended stopping distance and almost an accident. Dealer cannot determine problem.
1992 Chevrolet S10 brakes complaints
Page 3 of 5: complaints 41 to 70 of 121, newest first, as owners wrote them.
Abs frequently fails causing brakes to lock and the vehicle continues to move. At times, when the brake pedal is depressed it will stop (lock) before it is half way depressed.
Abs ehcu failure.
Anti-lock brakes fail, causing loss of control
Driving at approximately 10 MPH in inclement weather, trying to stop, ABS went completly out/locked up, ABS light came on. Dealer had to replace ABS system, including computer. Consumer had to unplug wire from unit to prevent from defect reoccurring.
Anti lock brakes experience extended stopping distance.
Anti-lock brakes fail in emergency situations, once resulted in an accident.
Anti lock brakes do not work properly.
Anti lock brakes lock up, repairs made however not sufficient.
When applying the ABS brakes, the pedal traveled to the floor, causing extended stopping distance to occur. Also on several occasions on slippery or wet pavement the left front brake will lock up. Dealer replaced the computer system which did not remdey the problem. *ak
When there is a panic stop the truck does not stop when applying the brakes in a panic stop. Driver states that the tire does not slide, but the truck does not stop. This is problem only happens when there is a panic stop.
When brakes are applied the pedal is hard, not allowing the vehicle to stop the way it should. The dealer has been notified. Also, runs very rough when it starts.subsequently starts to race and continues to race until it warms up.
When the brakes are applied there is extended stopping distance. The dealer has not been able to duplicate the problem.
Brake pedal went to the floor.
Abs: had to apply excessive pressure to stop vehicle; very hard braking; replaced four times. Also, cut rotors/replaced brake pads.
Anti lock brakes grab when applying.
When applying the ABS brakes on wet or dry pavement the pedal will intermittently travel to the floor ,causing extended stopping distance. Dealer cannot idenitfy any problems. Please give any further details.
Ea94038, the ABS braking system malfunctioned, making a grinding noise and "spongy feeling" on the brake pedal, causing extended stopping distance. *ak brake pads have been changed 8 times within a 2 and a half year period, the rotor, caliper, and sensor were replaced due to the ABS.
When brakes are applied, intermittently the pedal goes to the floor, the vehicle will not stop. The dealer has been contacted.
When appyling the ABS brakes on dry pavement the pedal traveled to the floor, causing extended stopping distance. *ak
Abs brake system module failed.
Vehicle has had extended stopping distance which resulted in accident. Vehicle has ABS brakes. Also, pedal goes to floor of vehicle when brakes are applied.owner also had numerous brake parts replaced which did not correct problem. Dealer can't find any problem with brakes. *ak wipers come on by themself and heater burned out.
Abs brake problems; on regular dry road condtions, during normal braking, step on the brakes, thereis noise from the brake system, and the truck feels like it wasn't going to stop. The truck slides and the wheels locked up. The left front brake shoes and drums were replaced by dealer.
Abs brakes locked up/failed.
While driving at approx 25-30 went to apply brakes ,no brakes , 10-15 times pumping petal. Finally braked,checked by mechanics thinks might be possible computer failure. This defect can cause accident.
Abs brakes failed, resulting in loss of control/crash.
Anti lock brakes lock up.
Ea94-038 consumer states when traveling on wet pavement and upon depressing the brake pedal, consumer noticed a loud noise from the brakes, pedal traveled to the floorboard, causing extended stopping distance' brake fade away. Consumer has contacted the dealer, dealer has replaced the pads.
Brakes: computer module failed.
When traveling at any speed and upon depressing the brake pedal, the pedal travels to the floorboard, causing extended stopping distance/brakes fade away, causing consumer to have an accident. Consumer has contacted the dealer, dealer has replaced the calipers and the brake pads and rotors. Please provide further details.
VIN decoder
See the problems and recalls for an exact car
Buying a used 1992 Chevrolet S10?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history