Ea94-038 active, ABS brake failure, brake pedal became very hard when first applied , and driving for a few seconds, pedal went to the floor. No effectiveness, in for repairs, no problem found.
1994 Chevrolet S10 brakes complaints
Page 12 of 19: complaints 311 to 340 of 532, newest first, as owners wrote them.
Brakes started feeling spongy and going to the floor, took the brakes in for service and the rotors were replaced and realigned. The brakes still feel spongy.
Abs system failed. Pedal spongy, hit brake hard, pedal dropped about an inch.
Antilock brakes failed.
Owner has ABS brakes, he states that at slow speeds rear brakes lock up, cannot control vehicle, dealers cannot find problem.
There is air in the ABS module and brake lines. There is also a problem with the idle control.
Vehicle was at a complete stand still, on level ground and normal road conditions . Owner hit the brake pedal and the pedal went to the floorbroad. Dealer stated that this condition was normal for anti-lock brakes.
Anti-lock brakes failed to stop vehicle, resulting in a crash.
While driving, when braking exp. Abs malfunctioned, wheels locked up then vehicle slid, brake action seems ineffective, vehicle slides several feet before coming to a stop, no prior warning.
While driving experienced intermittent ABS failure when attempting to slow/stop brake action seemed inadequate, pedal became spongy, resulting in extended stopping distance in wet/dry conditions.
Abs malfunctioned while driving, experienced intermittent crunch sound when applying brakes, action seemed ineffective as if there were no brakes, must reapply brake to stop, dlr can't recreate.
Abs: when braking, wheels locks up, brakes pedal pulsates, sometimes going to floor, resulting in extended stopping distance, nearly caused an accident.
The ABS brakes suddenly failed when attempting to stop, it is extremely dangerous when it's damp.
In an emergency the brakes locked up, causing extended stopping distance which nearly resulted in an accident. Please give further details.
Anti-lock brake failure.
Abs: while coming to stop, speed 20 MPH, 18 wheeler in front, applied ABS brakes, vehicle did not stop, resulting in a crash.
#ea94-038, on wet or dry pavement when applying the ABS brakes there is a popping noise and vehicle will not stop; also, the brakes are causing the tires to wear out . Please describe .
When applying the ABS brakes in sudden stop situations, the vehicle's brakes fail.
When pressing on the brake pedal it goes to the floor, have ABS anti-lock brakes .
Antilock brakes failed 2 times.
While driving, upon braking, ABS brakes grab then release, takes a lot longer to stop, brake action seems inadequate on wet pavement, vehicle brakes grab and vehicle slides forward, more so when turning right.
Antilock brakes failed.
Consumer states that left rotor prematurely wore out, brake pedal traveled to the floor, causing extended stopping distance which resulted in an accident.
Failure on the ABS braking system ea95-026, consumer came off an intersate, applied force to the brake pedal, the brake pedal went to the floor and the vehicle continued to move, causing the consumer to have an accident. *ak mechanic states the cause was that vaccum hose was not all the way in booster, also also check engine light was coming on a few times, consumer states vehicle hard to start sometimes.
While driving on wet pavement experienced ABS failure, when made attempt to slow/stop, brake action seemed ineffective, pedal went to floor then continued to roll forward. *ak
Vehicle's ABS braking system malfuctions, especially in wet or grave like road conditions, the brake pedal gets mushy, goes to floor and than a loud strange noise is heard.
While driving experienced ABS failure, when applied brakes, while on gravel road at approx. 8-10mph, pedal went to floor, hit bldg steps.
Poor ABS brake performance, at 30 MPH the pedal went to the floor during an emergency stop situation. Complete brake failure was experienced.
Coming down a hill applied the ABS brakes and the brakes would not stop the vehicle, let go of the brakes and then reapplied the brakes in order for the brakes to work. Please describe in detail.
While driving applied brakes and the bake pedal went all the way to the floor, vehicle didn't stop. Please describe.
VIN decoder
See the problems and recalls for an exact car
Buying a used 1994 Chevrolet S10?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history