While approaching a stop sign, me driver seat slid forward as I slowed. The locking device, a small plastic device, had broken under the seat. This allowed the seat to slide forward and backward. I had to wedge a piece of wood plank between the seat and the firewall in order to get my vehicle home.
1999 Chevrolet Silverado 1500 seats complaints
Page 2 of 2: complaints 11 to 30 of 30, newest first, as owners wrote them.
The drivers side power seat motor has play in it and allows the seat to move 1-2 inches back and forth as the truck brakes or accelerates. The passenger side seat is also jammed and no longer moves at all.
The seat latch on my 1999 chevrolet silverado 1500 broke allowing the seat to move freely. My 16 year old son was driving at the time and nearly had an accident because of it. The exact same condition occurred when the truck was nearly new (I am the original owner). The dealer fixed the seat adjuster the first time. This is a very dangerous defect. The replacement parts must be more robust. After reading all of the incidents of the same problems online, I cannot believe there has not been a recall. Are you waiting for a fatality?
1999 chevrolet silverado 1500 pickup truck drivers side power seat has about 1" back and forth movement while driving. Tracks look tight. Problem looks internal to the drive motor or gear. Not safe while braking or accelerating.
1999 chevy silverado. On 1/21/11 I pulled the manual release lever to release the driver's side seat and load material into the extended cab of my pickup. A plastic piece with metal components inside the track (quoted from dealer as a seat adjuster) fell out of the right side track. My driver's side seat would not and continues not to lock into place, causing me to have to drive with one foot on the floorboard, and use the other to accelerate and brake continuously. When driven, the seat freely moves forward and backward with centrifugal force. Note: the seatbelt is attached to the seat completely, not anchored to the sidewall and floor of the vehicle, so there is nothing to keep a driver from sliding all the way to the steering wheel if and when this piece fails.
Was not driving vehicle at time, simply getting something out of back seat, next morning, seat would not lock into place due to white plastic part in seat track of 1999 chevrolet silverado which prevents sliding back and forth has broken. I have already replaced this seat track once before, since the plastic part itself is not available for purchase. The first time it broke, I was braking and nearly had an accident. Replacement was $250 from dealer, entire seat track has to be replaced.
I have 99 chevrolet silverado 1500 ls 2wd with 6-way power seats. Both the passenger and driver seats move front and back during braking or acceleration. The movement is as much as 1 inch. The movement has increasingly become more since I first noticed the problem in 2006. I am very concerned that this problem poses a safety risk in a panic stop or collision situation. The seat(s) may break loose and slide full forward and/or backward resulting in loss of control or braking resulting in injury or death, and property damage. Airbag safeguard would be rendered useless because the seat moves in a unpredictable way that was never analyzed by manufacturer's testing.
Sunday, october 11, 2009 I pulled the manual release lever to release the driver's side seat and load material into the extended cab of my pickup. A plastic piece with metal components inside the track (quoted from dealer as a seat adjuster) fell out of the right side track. My driver's side seat would not and continues not to lock into place, causing me to have to drive with one foot on the floorboard, and use the other to accelerate and brake continuously. When driven, the seat freely moves forward and backward with centrifugal force. Note: the seatbelt is attached to the seat completely, not anchored to the sidewall and floor of the vehicle, so there is nothing to keep a driver from sliding all the way to the steering wheel if and when this piece fails. I immediately stopped driving the unsafe vehicle, and transported it to a local chevrolet dealership, fivestar, in aberdeen, wa. The dealership called today, october 13, 2009, with an estimated cost of just over $800.00. Dealer said that both tracks need replacing, because neither one is locking. Estimated cost $250.00 per track, plus the labor and taxes. I have ordered this work to be done.
Tl*the contact owns a 1999 chevrolet silverado 1500. The contact stated that the driver side front seat was unstable and the seat moves back and forth while driving. An authorized technician stated that he would have to pay $430.00 per seat to replace the seat unit. No repairs were made. The manufacturer was notified, but no assistance was provided.. The failure mileage was 47,000. The current mileage was 50,430. Updated 10/21/09. *lj the consumer stated both seats exhibited the problem. Updated 10/20/09
The latch mechanism for the drivers side seat adjustment failed, allowing the seat to slide front to back. The failure occurred when the seat was being moved forward to place items behind the seat. Plastic pieces fell out onto the floor. It appeared to be a plastic piece that held the locking pin for the seat. The temperature that day had been between 20 and 30 degrees f. The vehicle had to be driven home. When you applied the brake, the seat moved forward. When you applied the gas, the seat moved all the way back.
Tl*the contact owns a 1999 chevrolet silverado 1500. While driving 30-35 MPH, the driver's seat failed. The contact continued driving the vehicle. He stated that the seat was intact, but very unstable. The dealer stated that he would be responsible for repairing the vehicle at the cost of $600. The vehicle has not been repaired. The VIN was unknown. The current and failure mileages were 125,000.
Tl*the contact owns a 1999 chevrolet c1500. The contact stated that the front driver side locking mechanism failed. The seat moved forward when he stopped and backwards when he accelerated. The dealer stated that the adjuster assembly failed. The part has been replaced twice, but the failure persists. The current mileage is 119,000 and failure mileage was 53,000.
Front passenger seat slides back and forth on the track when vehicle stops and goes. Play has increased over time to at least 1 inch. Concerned that in an immergency stop and seat could detach.
Dt*: the contact stated while driving 40 MPH, a snapping noise was heard and the driver seat fell hard to the right. The vehicle was driven to the dealer, who determined the bracket used to secure the seat to the vehicle needed to be replaced. Updated 12/18/06.
Dt*: the contact stated while stopped at an intersection, the steering locked up, and the steering wheel could not be turned to the left. This was accompanied by the the sound of hydraulic resistance. The vehicle was not taken in for service. Second, a piece of plastic fell off the interior of the vehicle. Causing the driver seat to slide freely on the adjuster track when the contact sat in the seat. The vehicle was taken to a service dealer who was unable to determine the problem. Third, the contact replaced the daytime running lights twice. The lights only worked for 3 to 6 months at a time before having to be replaced. The lights were not addressed by a dealer or a private repair shop. Fourth, the headlamp switch constantly became excessively hot during operation of the headlamps. The vehicle was not taken in for inspection of the switch. Fifth, when the 4-wheel drive mode was engaged, the wheels did not turn independently, causing increased effort in turning the vehicle. This problem was not inspected. Sixth, the starter failed while attempting to start the vehicle. Upon inspection of the starter, it was noticed that the housing was cracked. A private mechanic was consulted, who notified the contact that this was a common problem. Finally, the passenger seat belt did not feed enough to allow for passenger comfort which caused the passenger to be abraised by the belt. The inertial control seemed to be intermittent. The seat belts were not inspected by either a private repair shop or a service dealer.
Antilock brakes wants to engage at low speeds and the front drivers seat released when stopping causing thrust forward.
Consumer stated had recall 96e010000 remedied for vehicle in 07/00. Dealer did performed stated corrective action, but only installed temporary holding bolts for seat frame. These bolts broke while consumer was driving, causing driver's seat to recline back w/o warning. Manfacturer advised consumer will not perform recall remedy again. Ts
Driver's side seat adjusting mechanism is broken, causing seat to remain in reclining position. Please provide any further details.
Dashboard area near the light switch would get hot. Driver's seat is loose. Would rock back and forth when braking or accelerating. Would make scrapping noises when this happens. Have been to dealer. *ak
Vehicle vibrates at speeds of 60 to 70. General motors indicated that this was normal for this vehicle. Gm also indicated it would be 30 to 60 days before new springs and shocks could be designed for the front and rear. Vehicle vibrates and is hard to control on uneven surfaces. Also, the track on the drivers seat broke and the dealer indicated that there were no parts available to replace seat track at this time. The sevice manager indicated this was a problem when a new model hits the market. Seat was repaired by placing a wooden block under the seat until parts are available.
VIN decoder
See the problems and recalls for an exact car
Buying a used 1999 Chevrolet Silverado 1500?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history