Abs brakes failed twice, resulting in collisions.
1992 Chevrolet Suburban brakes complaints
Page 4 of 6: complaints 71 to 100 of 146, newest first, as owners wrote them.
When appyling the ABS brakes on wet pavement the pedal will travel to the floor, causing extended stopping distance which nearly caused a collision to occur. *ak consumer states this has also occurred when approaching a light at an intersection, dealer can not find any problems.
Driving the truck down the road and a vehicle stopped in front of the truck, and when applying foot to the brake pedal to stop the truck, the truck just kept going. The truck rear ended the back of the vehicle that was in front.
When applying the ABS brakes in a panic stop situation, there is an extended amount of braking distance. Cause unknown.
When driving the truck and putting foot on the brake pedal, pedal just goes to the floorboard. *ak
Apllied the brakes and the pedal went to the floor. This does not happen all the time, just somrtimes. When this does happen the truck has extended stoppong distance.
When on a slight incline & applying the brakes, brakes would hold vehicle. When not on an incline brakes fail to stop or grab, causing extended stopping distances. Had not taken to dealer.
Owner has ABS brakes. Brakes do not operate properly in panic stops. Brake pedal must be pushed down with force to stop vehicle. Also, there is noise in ABS when brakes are applied.
When starting the vehicle in the morning and backing out of driveway and putting foot on the brakes, they lock up. Also when driving and in normal stopping the anti-lock brakes start functioning, and the brake pedal goes to the floor.
The ABS brake system does not operate properly. When traveling downhill and braking, ABS brakes are not effective.
In accident when the ABS braking system failed with pedal to the floor and would not stop. At 20-30mph when this happened.
Upon applying the ABS brakes, there is vibration and the vehicle pulls to the left due to rotors separating from mounting hub caused by corrosion.
The vehicle anti-lock brake system failed, causing an accident. Dealer said it was due to a defective anti- lock sensor.
Ab, brake failure, when driving at any speed when ABS kick in, wheel by wheel kicks in, cauisng extended stopping distance . Ea 95-026.
#ea95-026, was driving and applied the brakes and the ABS brake system failed.
Experienced intermittent loss of braking power.
Kelsey hayes ABS brake failure; when applying the brakes the pedal went to the floor and the vehicle would not brake. This happened twice on dry pavement.
Has ABS brakes, brakes failed, causing extended stopping distance and vehicle would not stop. Also, replaced front disc brake pads twice.
Antilock brakes failed, causing accident.
Another vehicle stopped at stop sign, chevrolet driver hit brakes, vehicle kept going, did not stop until rearended vehicle in front, was approx. Fifty feet away when braking. Took vehicle to dealership.
Abs, brake failure, ea95-026 active, continues to have brake failure, in for repairs four times, vehicle continues to pull to right or left, impact 12:00 position 20mph, applied brakes pedal went to floor, extended stopping distance.
Owner has ABS brake system, upon using the brakes owner had total brake failure. He notes that the ABS light stayed on after brakes were used and did not go out.
Abs: while coming down hill, applied brakes, pedal went to floor, few seconds later, brakes were up and working again, no warning, pumped brakes about 3 times, no effect, wet pavement.
Abs braking system failed while traveling on icy road, causing extended stopping distance which nearly caused an accident. Please give further details.
Applied the ABS brakes and vehicle would not stop, so when started pumping the brakes the vehicle came to a stop, ea 95 026.
On several occasions when ABS brakes are applied pedal has no pressure and allows truck to go through intersection. This also occurs when pulling a trailer. Please describe details.
Poor ABS brake performance. The pedal went to the floor, and complete brake failure was experienced, resulting in an accident.
Vehicle's ABS braking system became inoperative, it had a skidding effect on the road, then pedal went to floor, a loud noise was heard.the driver lost brake control and hit car in front.
Failure on the ABS brakes, when making a stop the brake pedal goes to the floor.
The ABS continues to go out. Please give more details.
VIN decoder
See the problems and recalls for an exact car
Buying a used 1992 Chevrolet Suburban?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history