Rear brakes started grabbing and locking up about 9,009 miles after a drum, shoe and hardware replacement. Rear skids and slides.
1999 Chevrolet Suburban brakes problems
246 complaints (39% of all complaints for this car). Typical mileage when it fails: 96,000. 27 crashes reported.
- owner complaints
- 246
- of this car's complaints
- 39%
- typical mileage
- 96,000
- crashes
- 27
- recalls
- 0
Which part fails
- Antilock/traction control/electronic limited slip147
- Foundation components: disc28
- Foundation components18
- Foundation components: disc: rotor14
- Foundation components: master cylinder4
- Foundation components: hoses, lines/piping, and fittings4
- Antilock4
- Foundation components: drum3
At what mileage
Complaints by mileage at the time of the problem.
Chevrolet Suburban brakes problems in other years
Specific symptoms reported on the 1999 Chevrolet Suburban brakes
Phrases found in the owners' own descriptions, so one complaint can mention several symptoms.
Related recalls
No recalls on record for this model year.
Related investigations
Brake line corrosion failure
On January 11, 2011, ODI opened EA11-001 to investigate allegations of premature brake line corrosion failure in model year (MY) 1999 through 2003 General Motors (GM) full-size pickup trucks and sport utility vehicles sold or registered in the following region of the United States that the federal safety agency has viewed as salt states for investigations of corrosion related issues:Connecticut, Delaware, District of Columbia, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia and Wisconsin.The subject vehicles represent the first five MY's of GM's GMT800 platform production, of which approximately 2,038,504 vehicles were sold in salt states (the subject vehicles).The GMT800 platform includes the following vehicles:1999-2007 Chevrolet Silverado and GMC Sierra 1500, 2500 and 3500 series pick-up trucks; 2000-2006 Chevrolet Suburban, Chevrolet Tahoe and GMC Yukon sport utility vehicles; and 2002-2006 Cadillac Escalade and Chevrolet Avalanche sport-utility vehicles.General Motors produced a total of approximately 10,427,062 GMT800 vehicles for sales in the United States, including almost 5 million that were sold in salt states.Although there are over 60 different brake pipe routing configuration used in GMT800 vehicles, with the exception of the rear crossover pipes in MY 200x-2007 vehicles that changed from rear disc to drum brakes, all of the vehicles use brake pipes from the same supplier with a common double-wall, brazed steel pipe design with a combination of hot dip Zinc-Aluminum corrosion protection coating and Aluminum paint outer layer known in the industry as AlGal (ASTM-B750). ODI analysis of field data regarding GMT800 vehicles identified a total of 3,645 complaints of brake pipe corrosion failures, including 107 alleging crashes, and 40 injuries.Though only 20% of total GMT800 production, due to age and region the subject vehicles account for a disproportionate share of the failure experience; with 2,702 of the complaints (75%), 88 of the crashes (82%) and 20 of the injuries (50%) reported in those vehicles.Analysis of the complaints showed strong correlations to vehicle age and region.For vehicles with less than 8 years of service, the complaint rates were minimal for all regions.In the salt states the failure rates begin to climb as the vehicles advance in age, particularly in the Northeast corner of the United States.The complaint rates in the salt states go from less than 0.1 incident per thousand vehicles (IPTV) at 7 years in service to over 1.0 IPTV after the 12th year of service for the subject pickup trucks and utility vehicles.Most of the failures reported to ODI occurred in vehicles with more than 10 years in service.ODI?s investigation did not identify any specific defect conditions that were causing or contributing to the brake pipe failures.Nor did the analysis isolate the problem to any subject vehicle sub-populations when analyzed by vehicle type or production range.The investigation found that vehicles experiencing brake pipe corrosion failures were likely to have general patterns of excessive corrosion on the majority of the brake pipe assembly and appear to be occurring due to expected wear out for the brake pipe coating material used in the subject vehicles and the environmental conditions in severe corrosion states.A safety-related defect has not been identified at this time.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by the federal safety agency that a safety-related defect does not exist.The agency will monitor t
EA11001
Brake line corrosion failure
The Office of Defects Investigation (ODI) received Defect Petition DP10-003 on March 2, 2010, requesting the investigation of model year (MY) 2003 Chevrolet Silverado 2500HD 4WD pickup trucks for corrosion failures of the vehicle brake lines.DP10-003 was granted and on March 30, 2010, Preliminary Evaluation PE10-010 was opened on more than six million model year 1999 through 2003 light trucks and sport utility vehicles manufactured and sold by General Motors Corporation (GM).On July 2, 2010, ODI received GM's response to an information request, which included GM's assessment of the frequency and safety consequences of the alleged defect. GM stated that:(1) the brake system of the subject vehicles is split front/rear and should a brake pipe suddenly fail for any reason, the affected vehicle would be capable of stopping with the pressure supplied by the remaining circuit; (2) the subject vehicles were designed to meet the hydraulic circuit partial failure requirements of Federal Motor Vehicle Safety Standards 105 and 135, Light Vehicle Brake Systems; and (3) should a brake fluid leak occur for any reason, the brake system malfunction indicator lamp (MIL) would illuminate and warn the driver before the brake fluid level was low enough to cause a loss of line pressure.ODI's and GM's analysis indicates that 85 percent of the complaints occurred on vehicles used primarily in States that use salt on the roads during Winter months (Connecticut, Delaware, District of Columbia, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia and Wisconsin).Overall the complaint rates per 100,000 vehicles for Salt Belt States is 43.0 and Non-Salt Belt is 3.0.In approximately 25 percent of the complaints the brake pipe failure occurred suddenly, with no warning (i.e., no MIL, Brake Fluid Loss Warning), and resulted in extended stopping distances.In 30 of these the increase in stopping distance that resulted was a factor in the crash and in 10 others the vehicle was intentionally steered off the road or into another lane of travel in order to avoid a crash.This investigation has been upgraded to an Engineering Analysis (EA11-001) for subject vehicles sold or currently registered in Salt Belt States to further assess the scope, frequency and safety risks associated with sudden failures of corroded brake pipes that can result in decreased brake effectiveness. ODI will continue to gather information on subject vehicles outside the Salt Belt as well.
PE10010
Unwanted low-speed ABS activation
In a letter dated august 29, 2005, gm notified odi that it was recalling certain model year 1999 through 2002 c/k pickup trucks and sport utility vehicles to correct a problem with anti-lock brake system (ABS) wheel speed sensor corrosion that may result in unwanted ABS activation and extended stopping distances during low-speed braking (recall 05v‑379).gm's recall covers approximately 804,000 vehicles currently registered in the following 14 salt-belt states:connecticut, illinois, indiana, massachusetts, maine, michigan, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, and west virginia.the recall procedure will involve removing the sensor, cleaning the mounting surface, applying a rust inhibitor (zinc-x) to the surface, and reinstalling the sensor.if necessary, the sensor will be replaced. The population and failure report data given in this resume are for the full region that has been considered by odi as the salt-belt.that includes delaware, iowa, maryland, minnesota, missouri, wisconsin and the district of columbia in addition to the 14 states included in 05v‑379.the states covered by gm's recall have the highest incident rates for the subject condition, accounting for 91% of the incidents, but only 24% of subject vehicle sales in the united states.odi's analysis determined that 840 of the complaints, 244 of the crashes, and 16 of the injuries identified in this investigation occurred in those states.the resulting incident and crash rates are 96.2 and 28.0 per 100,000 vehicles respectively (note:rates are based on vehicle sales, not registered vehicles). The corresponding numbers in the excluded portions of the salt-belt are 399,000 vehicles, 81 incidents (20.3 per 100,000 vehicles), 3 crashes, and no injuries.the statistics in the remaining 30 states are 2,406,000 vehicles, 168 incidents (7.0 per 100,000 vehicles), 31 crashes, and one injury.gm and odi are continuing to monitor the problem experience in states that are not included in the recall.gm will provide odi with updated complaint, field report, and warranty data in november 2005.odi and gm will review that data and assess the appropriateness of the current scope of the recall at that time.
PE05020
What 1999 Chevrolet Suburban owners say
Most recent owner complaints, unedited.
My suburban has 43,700 miles, and the anti-lock brake system has not worked for several years. I checked with the local chevrolet dealership, and they said that the system is unrepairable, the only thing they can recommend is to pull the fuse and disable the ABS system entirely. I checked with the local parts store, and they tell me that the ebcm- electronic brake control module- was the model kh310, manufactured by kelsey-hayes, and it is no longer available. Further, that there are no used, repaired or remanufactured units available. I checked the internet, again, there are no units available anywhere, no one manufactures a replacement, in fact that model, the kh 310, is "unrepairable." yet I'm pretty sure there are literally hundreds of thousands of these suburbans still on the road today, many which have non-functioning and now totally unrepairable ABS brakes. It is a heavy vehicle- weighs about 5,300 pounds, and with its four wheel drive is often used in the winter, esp in snowy places like wi where I live. I feel it is dangerous, perhaps even irresponsible, to say to the owners of all these vehicles; "sorry, we can't fix it, you'll just have to pull the fuse and go without ABS." I would like to see the government tell gm, or kelsey-hayes, that at the least they need to make a compatible repair unit available for sale. If I leave the fuse plugged in, the "ABS" warning light goes off, but the truck wants to roll through a stop light since the ABS releases the brakes, erroneously thinking the truck is skidding, and you have to quickly jam hard on the brake pedal to make the truck stop, and hope that the extra two feet you roll doesn't send you into the rear bumper of the car in front of you. My father gerhard is giving me this very truck because he has become afraid to drive it.
Tl* the contact called on behalf of the owner of a 1999 chevrolet suburban 1500. The contact stated that while driving at 20 MPH downhill, the steering wheel seized, the brake pedal was depressed but failed to slow the vehicle. The vehicle reached speeds of between 95-100 MPH before crashing into a building with an aluminum structure. The crash was on the passenger's side of the vehicle. The air bags deployed. The driver sustained laceration over the right eye which required several stitches. A police report was filed. The vehicle was towed regal dodge located at 1223 blue valley dr, pen argyl, pa 18072, (610) 863-6900, where it was scheduled to be diagnosed which was still pending. The vehicle was not repaired. The manufacturer was not contacted or informed of the failure. The approximate failure mileage was 175,000.
I pulled into my driveway and the brakes didn`t work, pedal went to the floor. I opened the hood and saw brake fluid all over the left side of the engine.I then noticed several rusted brake lines one of which had a large hole in it. I had my wife step on the pedal and brake fluid came streaming out of the hole.
Tl* the contact owns a 1999 chevrolet suburban. While driving at approximately 63 MPH, the brake pedal was depressed and failed to respond. In addition, the contact stated the brake calibers seized. The vehicle was taken to a dealer where it was diagnosed that the brake line had to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 127,000. The VIN was not available.
Brakes failed due to corroded brake lines. Appears that rear lines failed but neither front or rear brakes worked during incident. Brake lines are very rusty whereas there is almost no rust on other components.
The first issue I had was while on vacation in 2012 - I was driving approx. 25 MPH and stepped on the brake to stop at a traffic signal. The pedal went to the floor and the brake light came on, and the vehicle lost what I estimate to be 80% of stopping power. This issue occurred intermittently for the next few months, always at low speeds, with a repair shop being unable to locate the problem. After several close calls, it was eventually traced to a corroded brake line in the front driver area of the vehicle only after the line ruptured completely and I missed going through the fence separating my yard from the neighbors by just inches. That line was replaced, but with a used part because the local dealer refused to sell an exact fit brake line and the mechanic was unable to duplicate the original part by hand. The brake fluid was always within the acceptable range, and the brake warning light came on only while the brakes were actively failing. It would turn off as soon as I took my foot off of the brake. Fast forward to august 2015 - I'm coming to a stop in a driveway, and the pedal suddenly sinks completely to the floor, the brake light comes on, and the vehicle does not stop. The vehicle stopped after stepping on the emergency brake, and I checked the brake fluid. It was full. The problem this time was traced to a metal brake line in the drivers side rear section of the vehicle. This line is also heavily corroded and will need to be replaced. It was noted that the frame of the vehicle has very little to no rust and there is no rust to be found on the body or the rest of the vehicle. However, there are multiple places where all of the metal brake lines running through certain areas are heavily corroded. It has been determined that all of the brake lines in this vehicle will have to be replaced in the future to make it safe to drive again.
Tl* the contact owns a 1999 chevrolet suburban. While driving at approximately 10 MPH, the low speed ABS modulator activated when the brake pedal was depressed. The failure recurred several times. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was 150,000.
Tl* the contact owns a 1999 chevrolet suburban. While driving at a low speed, the brake pedal was depressed and the stopping distance was extended. The vehicle was not diagnosed or repaired. The failure recurred on numerous occasions. The manufacturer was not notified of the failure. The failure mileage was 180,000.
1) driver side rear brake line failed due to corrosion, while backing out of my drive way. Replaced line. 2) passenger side front brake line failed while approaching a stoplight. Rear end accident was avoided within inches. Line failed due to corrosion. Upon further inspection of the brake line system, found extensive corrosion of the entire system. The vehicle is not drive able at this is time.
Questions about the 1999 Chevrolet Suburban brakes
Does the 1999 Chevrolet Suburban have brakes problems?
Owners have filed 246 complaints about the brakes of the 1999 Chevrolet Suburban, 39% of all its complaints, more than any other problem.
At what mileage do 1999 Chevrolet Suburban brakes problems start?
The typical (median) mileage in owner complaints is 96,000 miles.
Was there a recall on the 1999 Chevrolet Suburban brakes?
There is no recall for this problem on this model year.
What year does the Chevrolet Suburban have bad brakes?
The Chevrolet Suburban model years with the most brakes complaints are 1994 (581 complaints), 1993 (382 complaints) and 1999 (246 complaints).
Other 1999 Chevrolet Suburban problems
Tires 92Electrical 58Steering 52Transmission 47Visibility 44Fuel system 37Engine 35Suspension 33Locks 23Body 20Acceleration 19Lights 18Airbags 14Seat belts 13Seats 11Wheels 4
VIN decoder
See the problems and recalls for an exact car
Buying a used 1999 Chevrolet Suburban?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history