This vehicle was involved in a tragic car accident. The passengers both suffered deep laceration to the skull and other vital parts of the body. There was a recall notice that was sent to the owner 4 months after the fatal accident had occurred. Based on police inspection of the vehicle, they’ve determined there was mechanical failure to the vehicle which can be seen through a police bodycam at the police impound lot. The front passenger suffered a 6 inch deep cut to the skull according to the medical examiner’s report. The child in the rear also suffered a deep laceration to the ankle and foot despite being restrained in a child seat. Driver suffered a graze cut to the side of his head and survived the tragic accident after recovering from a coma he stated that the brakes did not function properly when depressed moments prior to the accident. Data recorder from the vehicle shows the driver was depressing the brake pedal the entirety of the time up to the moment of impact. This vehicle was t-boned by an suv, and this accident should have been survivable, however the passenger seat looks to be torn out of its brackets according to the pictures from the accident scene. I am requesting this vehicle be investigated as there are many vehicles similar to this one that could have dangerous defects which were outlined in the safety recall notice that was mailed to the owner. The safety recall did mention to stop driving this vehicle immediately, however this notice did not arrive in a timely manner to where anyone could have taken action immediately. I am requesting that this vehicle be inspected for not only the safety of the community it’s but for identifying why two people lost their lives due to a manufacture failure that could have been prevented if notification was sent in a timely manner. Thank you and I look forward to following up with someone regarding this immediate and dangerous concern. I have the original letters and when they were mailed to the owner.
2007 Chrysler 300 airbags problems
132 complaints (27% of all complaints for this car). Typical mileage when it fails: 102,000. 11 crashes reported.
- owner complaints
- 132
- of this car's complaints
- 27%
- typical mileage
- 102,000
- crashes
- 11
- recalls
- 2
Which part fails
- Side/window1
At what mileage
Complaints by mileage at the time of the problem.
Chrysler 300 airbags problems in other years
Specific symptoms reported on the 2007 Chrysler 300 airbags
Phrases found in the owners' own descriptions, so one complaint can mention several symptoms.
Related recalls
Air bags: frontal: passenger side: inflator module
- What is wrong
- Chrysler (FCA US LLC) expanded the affected population to include 73,712 2005-2009 RAM 2500 trucks produced at the St. Louis North Assembly Plant. With this change, Chrysler is recalling certain model year 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2010 RAM 3500 Cab Chassis, 2008-2010 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge Durango, 2007-2009 Chrysler Aspen, 2007-2012 Jeep Wrangler, 2008-2012 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2012 Chrysler 300, 2006-2012 Dodge Charger, 2005-2011 Dodge Dakota, and 2006-2009 Mitsubishi Raider vehicles originally sold, or ever registered, in AL, CA, FL, GA, HI, LA, MS, SC, TX, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Chrysler is also recalling 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2009 RAM 3500 Cab Chassis, 2008-2009 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge Durango, 2007-2009 Chrysler Aspen, 2007-2009 Jeep Wrangler, 2008-2009 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2009 Chrysler 300, 2006-2009 Dodge Charger, 2005-2009 Dodge Dakota and 2006-2009 Mitsubishi Raider vehicles originally sold, or ever registered, in AZ, AR, DE, Washington D.C., IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Chrysler is recalling certain 2005-2008 RAM 2500, 2006-2008 RAM 3500, 2007-2008 RAM 3500 Cab Chassis, 2008 RAM 4500 and 5500 Cab Chassis, 2004-2008 Dodge Durango, 2007-2008 Chrysler Aspen, 2007-2008 Jeep Wrangler, 2008 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2008 Chrysler 300, 2006-2008 Dodge Charger, 2005-2008 Dodge Dakota, and 2006-2008 Mitsubishi Raider vehicles originally sold, or registered, in AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY.
- Risk
- These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. These inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
- Remedy
- Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the Chrysler, Dodge, Jeep and RAM owners. Mitsubishi owners will be notified by their company. Dealers will replace the passenger frontal air bag inflator, free of charge. The recall began on March 27, 2017. Owners may contact Chrysler customer service at 1‑800‑853‑1403. Chrysler's number for this recall is S43. Note: This recall supersedes recall 14V-7700.
Recall number 16V352000 · Recall details
Air bags: frontal: driver side: inflator module
- What is wrong
- Chrysler (FCA US LLC) is recalling certain model year 2005-2009 Dodge Ram 2500, 2004-2008 Dodge Ram 1500 and Durango, 2006-2009 Dodge Ram 3500, 2008-2010 Dodge Ram 4500 and 5500, 2007-2008 Chrysler Aspen, 2005-2010 Chrysler 300, 300C, 300S, and SRT8, 2006-2010 Dodge Charger, 2005-2008 Magnum, 2005-2011 Dodge Dakota, and 2006-2009 Mitsubishi Raider vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture.
- Risk
- In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
- Remedy
- Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the affected Chrysler and Dodge owners and Mitsubishi will notify the affected Raider owners. Dealers will replace the driver's frontal air bag inflator, free of charge. The recall began for Chrylser on June 8, 2015. The recall for Mitsubishi started on June 24, 2015. Chrysler and Dodge owners may contact Chrysler customer service at 1‑800‑853‑1403. Mitsubishi owners may call 1‑888‑648‑7820. Chrysler's number for this recall is R25. Note: This recall supersedes recall 14V817 in its entirety. Vehicles that have had their driver side frontal air bag replaced previously need to have their air bag replaced under this recall as well.
Recall number 15V313000 · Recall details
Related investigations
Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
EA21002
Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.ODI's investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five ODI reports cited above can be reviewed online at http://www-odi.the federal safety agency.dot.gov/owners/Searchreference under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
EA15001
Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with consistently high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly, ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016, four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016, four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The PE is now closed/upgraded to an Engineering Evaluation (EA15-001) to include all manufacturersand vehicles known to be affected at this time.ODI's EA investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The recalls related to this PE are: 14V343, 14V344, 14V348, 14V351, 14V353, 14V655, 14V700, 14V701, 14V752, 14V763, 14V770, 14V773, 14V787, 14V802 and 14V817.The number of vehicles affected are an estimate since some vehicles may have both the driver and passenger side inflators recalled. The five ODI reports cited above can be reviewed online at http://www-odi.the federal safety agency.dot.gov/owners/Searchreference under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
PE14016
What 2007 Chrysler 300 owners say
Most recent owner complaints, unedited.
I have 130k mileage on my Chrysler 300 2007 model. For about 3months, I’ve been experiencing fuel leaks from the bottom rear corner of the driver side just directly beneath my fuel tank, which also makes both the exterior and interior of the car smell of gas. I took the car for maintenance and the fuel tank seals were replaced after my fuel pump was changed. There was no visible fuel spill after the rear seats were removed and inspected but there was constant droplets of fuel from beneath the rear left side of the car. I don’t know what else to do and what can cause this?.. besides, whenever I put fuel in my tank, I can smell fuel coming from the AC vents. Also, my airbag warning light has been on for a long time on my dashboard. Help!!!
Tl* takata recall. The contact owns a 20007 chrysler 300. While driving approximately 40 MPH, another vehicle ran a red light and struck the front passenger side of the contact's vehicle. None of the frontal air bags deployed. A police report was filed. The driver and passenger were transported via ambulance to the hospital due to neck and back injuries. The vehicle was towed to an impound lot. The vehicle was not taken to the dealer for diagnostic testing. The manufacturer was not notified of the failure. The vehicle was not repaired. The vehicle was included in the federal safety agency campaign numbers: 15v313000 (air bags) and 16v352000 (air bags). The approximate failure mileage was 50,000. Parts distribution disconnect.
Tl* the contact owns a 2007 chrysler 300. The contact stated that the air bag warning indicator was illuminated. The vehicle was taken to whitten brothers of ashland (804‑798‑6071, located at 11409 washington hwy, ashland, va 23005) to be repaired per the federal safety agency campaign number: 16v352000 (air bags); however, the indicator remained illuminated after the recall repair. The vehicle failed inspection due to the air bag indicator. The vehicle was taken back to the same dealer who stated that the contact would be responsible for the repair. The manufacturer was not made aware of the failure. The vehicle was not repaired. The failure mileage was not provided.
I have contacted the ram country chrysler dodge jeep ram, mineral wells 4011 us highway 180 e. Mineral wells, tx 76067-8376 940‑654‑3120 several times over about two years, and they always tell me that they haven't received a bag to replace the one in my car.
Tl* takata recall. The contact owns a 2007 chrysler 300. The contact received notification of the federal safety agency campaign numbers: 15v313000 and 16v352000 (air bags). The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The contact called yemm chevrolet buick gmc chrysler dodge jeep ram at (309) 271-0106 (located at 2195 n henderson st, galesburg, il 61401) and was informed that parts were not available. The manufacturer was not contacted. The contact had not experienced a failure. Parts distribution disconnect.
Tl *the contact owned a 2007 chrysler 300. While driving approximately 40 MPH, a second vehicle crashed into the passenger side door of the contact's vehicle. The contact's vehicle spun out and crashed into other vehicle. The passenger side and front end of the contact's vehicle sustained severe damage; however, the air bags did not deploy. The driver sustained neck, back, and shoulder injuries and the front passenger sustained head, neck, back, and hip injuries. Medical attention was received. The vehicle was destroyed and towed to an undisclosed location. A police report was filed. The manufacturer and local dealer were not notified of the failure. The failure mileage was 170,000. *tt
Tl* the contact owned a 2007 chrysler 300. While driving 50 MPH, the contact was involved in a front end collision; however, the air bags did not deploy. There were no warning indicators illuminated. The vehicle was towed to a tow yard and deemed destroyed. The contact sustained neck and back injuries, which required medical attention. A police report was filed. The contact stated that the air bags were previously repaired prior to the crash. The manufacturer and an unknown dealer were notified. The failure mileage was 100,020.
Takata recall. I just received a paper in the mail and I'm reading it and it says airbag recall for my vehicle. I looked up my vehicle and it says there was a recall for both driver and passenger airbags. I recently just crashed my vehicle and no airbag deployed and I tried to fight with my dealership about it and all they said was 'you signed a paper knowing they didn't deploy', what world would someone buy a vehicle knowing they don't deploy?
Takata recall I called the number on the recall notice received in the mail. The representative explained that she needed to place me on hold to contact the dealer in canton, ga to ensure that they had the parts to complete the recall repairs. Once she verified with them she connectd me to the dealership and we scheduled the appointment. When I arrive at the appointment I was told that they do not have the part and was given a card to call and she if the parts are available and reschedule the appointment. We called for a week and was given the ru around. So we tried a differen location. We called marietta and provide the contact information requested. Marietta dealership said that they would give us a call when the part(s needed are available...as of today I still have not heard from either dealership and have not been able to get the repairs needed for my family's safety.
Questions about the 2007 Chrysler 300 airbags
Does the 2007 Chrysler 300 have airbags problems?
Owners have filed 132 complaints about the airbags of the 2007 Chrysler 300, 27% of all its complaints.
At what mileage do 2007 Chrysler 300 airbags problems start?
The typical (median) mileage in owner complaints is 102,000 miles.
Was there a recall on the 2007 Chrysler 300 airbags?
Yes, 2 recalls: 16V352000, 15V313000. Check your VIN to see if your car still needs the free repair.
What year does the Chrysler 300 have bad airbags?
The Chrysler 300 model years with the most airbags complaints are 2006 (258 complaints), 2005 (255 complaints) and 2008 (185 complaints).
Other 2007 Chrysler 300 problems
Transmission 189Electrical 57Engine 55Brakes 26Fuel system 23Acceleration 16Driver assistance 13Suspension 13Seat belts 10Wheels 8Steering 7Body 6Lights 6Visibility 6Tires 4Locks 2Seats 2
VIN decoder
See the problems and recalls for an exact car
Buying a used 2007 Chrysler 300?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history