Chrysler Pacifica ball joint problems

Filed Oct 9, 2026 · Steering · AR

Our 2017 Chrysler Pacifica has been experiencing a steering malfunction that appears to be identical to the condition currently under investigation by the federal safety agency under Action Number PE25009. For the past few months, the steering wheel has intermittently exhibited a sticking or binding sensation while driving through gradual curves. When this occurs, the steering wheel becomes temporarily resistant to movement, requiring the driver to apply additional force to overcome the resistance and continue steering through the curve. When the steering wheel releases from the sticking position, the sudden change in resistance can make it difficult to maintain smooth, controlled steering. The problem has become noticeably worse and more frequent over the past few weeks. We had the vehicle inspected by an independent mechanic, who advised that the power steering motor needs to be replaced and recommended that we take the vehicle to an authorized Chrysler dealership. The Chrysler dealership (Lewis Chrysler Dodge in Fayetteville, AR) inspected the vehicle and informed us the steering rack and pinion assembly and both tie rod ends need to be replaced and quoted us a cost of $4,450 for parts and labor. After researching the problem, we discovered the federal safety agency Preliminary Evaluation PE25009 involving 2017–2018 Chrysler Pacifica vehicles. The symptoms described in the investigation closely match what we have been experiencing, including intermittent steering resistance during gradual turns and the need to apply additional steering force to overcome the resistance. Because the condition has been getting worse, we are concerned about the possibility of a total loss of power steering while driving. We cannot afford the quoted repair cost, and because of our safety concerns, we have stopped driving the vehicle. We are submitting this complaint so that our experience can be documented and considered part of the federal safety agency's ongoing PE25009 investigation.

Filed Sep 21, 2026 · Steering · GA

**Steering rack failure** I bought this as a used vehicle from Calavan CDJR in [XXX] XXX with 89,219 miles [XXX] It now has approximately 117,000 miles on it. When I bought it, there was a suspension noise that appeared to be due to strut mounts. Due to this noise, dealer lowered the sale price. Since the time of purchase, I have replaced both struts, inner & outer tie rods, lower control arms, sway bar links and both cv axles. And it is still making the same noise, only it has gotten much worse. Based on the last mechanic's inspection, he states that the noise is from a bad steering rack. I reviewed this online and found that the federal safety agency has an open investigation for the steering rack and would like to see if there is anyway that you can help me with replacing it as it poses a severe safety hazard and is very expensive to replace. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed Sep 2, 2026 · Steering · VA

The steering at times will “stick” and a bit of force has to be used to get it to release. Also, when turning slightly at low speeds (steering wheel in the 11 or 1 position at less than 20mph) the steering will “shudder” or “vibrate.” This affects the entire steering system. The entire vehicle vibrates and it feels as though you may lose control of the vehicle. This issue has been continuous since approximately 2022. In an attempt to fix the issue, we have replaced the shocks, coil springs, front axels, front hub assemblies, sway bar links, and tie rod ends. None of this fixes the issue. This seems to be similar to the complaints contained in the federal safety agency Campaign Number PE25009.

Filed Jul 16, 2026 · Suspension · CA

My 2018 Chrysler Pacifica Hybrid has developed a progressively worsening creaking noise from the front left suspension. It began two years ago occurring only occasionally when accelerating from a full stop or exiting a driveway, and has since become constant under most normal driving conditions including acceleration, deceleration, and slow turns in either direction. The vehicle has approximately 35,000 miles and has been driven exclusively on regular paved roads with no off-road or unusual use. The pattern of gradual degradation on a low mileage vehicle suggests a corroding or deteriorating structural component rather than impact damage. An authorized Chrysler dealership recommended replacing both lower control arms at approximately $3,300, framing this as necessary to continue diagnostics rather than a confirmed repair. No specific component was isolated as the cause. This is directly relevant to Recall V15 (the federal safety agency 19V143000), issued for right front lower control arm ball joint separation on 2018 Pacifica and Pacifica Hybrid vehicles, which could cause loss of directional control without prior warning. My vehicle was excluded from that recall despite exhibiting similar symptoms on the left side. Two documented owner reports establish safety relevance. A mechanic warned an owner that their left ball joint should be replaced or risk failure while driving, leaving them unable to steer ([XXX]). Separately, an owner reported control arm bolts falling out causing the vehicle to steer itself in random directions ([XXX]). I request the federal safety agency investigate whether Recall V15 should be expanded to include the left front lower control arm. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed May 30, 2026 · Electrical, Steering · SC

2019 Chrysler Pacifica. The vehicle has ongoing steering, electrical, and power steering/EPS failures. The steering wheel intermittently jerks/pulls while driving, the vehicle has experienced random loss of steering assist, and the electrical system cuts out or malfunctions during normal use. The steering wheel lights and backup camera guidelines also disappear during driving sessions and only return after fully restarting the vehicle. The exact root cause is UNKNOWN, but the affected systems appear to include the EPS/power steering system, steering/suspension components, battery/electrical system, and possibly related control modules. My safety and others’ safety were put at risk because the vehicle has lost steering assist and had electrical failure while being driven, including a prior failure in an intersection. When the steering assist drops or the wheel jerks, the vehicle becomes difficult to control. This is especially dangerous because I transport my family in this vehicle. The issue has been reported repeatedly since purchase. The vehicle was inspected/repaired through Carvana/SilverRock’s repair process at Brockman Automotive, including rack and pinion/steering-related work. After that repair, the vehicle continued to drift and handle improperly. A later independent inspection at Davidson Automotive identified a loose/not properly secured tie rod, alignment problems, and a failed auxiliary battery. The shop could not complete deeper diagnostics until those prerequisite issues were corrected. The vehicle has also suffered abnormal front tire wear after the steering/alignment problems. Warning/symptoms before or during failures include steering wheel jerking/pulling, clunking/clanking/grinding/groaning noises, vehicle drift, service start/stop warning, electrical malfunctions, intermittent steering wheel control/light issues, loss of backup camera guidelines, and loss of steering assist. The vehicle/component is available for inspection upon request.

Filed Mar 5, 2026 · Steering · MI

When driving at speeds over 45 mph and making turns (eg on high ways) the van will sway and rock. I have installed new shocks, had an alignment, had ball joints and sway bars inspected, and had tires restated. I’m wondering if there is some sort of an issue with the electronic assist power steering that senses g forces and compensates inappropriately. It is extremely dangerous and we have nearly lost control of the car while doing a routine turn. It happens when turning left, but not when turning right.

Filed Jan 29, 2026 · Driver assistance, Steering · OR

Right and left lower control arms are failing. Steering rack replacement is required for repair and imperative for safe vehicle driving. The safety of people in the car is greatly at risk. Since learning about the true problem, the van is parked and we're having to borrow another car for transportation. The issue is that when turning, the steering wheel gets stuck. This seems to occur at 11 o'clock and 1 o'clock positions during turns. The Chrysler dealer was able to reproduce the issues when taking the car on a test drive. The component has only been inspected by the dealer. This issue first appeared about 6 months prior to it seemed like a fluke at first. The occurred became more consistent and that's when we took it in for surface. We took it into a local auto shop a few times and they were unable to detect the issues. Then we took it into the dealership where they were able to identify the issues. I'm not sure if there were warning lamps prior to failure.

Filed Sep 29, 2025 · Suspension · 1,173 miles · PA

The contact's mother owns a 2026 Chrysler Pacifica. The contact stated that while his mother was driving 30-35 MPH on a well-maintained road, the front passenger's side of the vehicle suddenly lowered, and the driver lost control of the steering wheel, causing the rear passenger's side of the vehicle to strike a curb, and the vehicle was pushed towards the left, near oncoming traffic. The contact stated that the vehicle nearly rolled over prior to coming to a stop. The driver was able to exit the vehicle. A Police Officer arrived at the scene and redirected traffic away from the vehicle, but no Police report was filed. There was no injury sustained. The contact stated that upon meeting his mother at the scene, the contact inspected the vehicle. The contact noticed that the front passenger's side lower control arm ball joint had fractured sharply, separated, and had gone sideways. The vehicle was towed to an Auto Collision repair shop. The dealer was notified of the failure and reported the failure to a Chrysler regional manager. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure and referred the contact to the dealer for assistance. The failure mileage was approximately 1,173.

Filed Sep 10, 2025 · Steering · NY

Mine has a looseness feeling yet on inspection everything like tie rod ends are good. Definitely at the 11 o clock position I can get a shudder or shimmy even at low speeds. Despite it feeling loose it’s tracking excellent on the highway like everything is tight. I also get a rattle like the tie rods are loose at speeds below 30. There is no looseness anywhere on inspection. If the wheel is shaken on a drive on lift you can feel the noise in the rack mostly on the left side. Happens every day.

Filed Jan 27, 2025 · Driver assistance, Steering · VA

We experienced a failure of the entire steering rack assembly and tie rod ends and also the control module for the steering system. The repair cost was just under $5,000.00. I question why the entire rack and pinion steering system needed to be replaced. I ask what component failed on on the steering rack and what specifically fail on the steering control assembly. No logical answer was provided. I told the dealer I brought the Van in for a diagnosis of concerning steering corrections taking place even with the steering adaptive function turned off. I explained replacing everything involving the steering of the car should correct the issue but it did not feel like a diagnoses and more like a shotgun approach that I would be forced to pay for. I explained by wife drive this vehicle and she had a trip planned to travel across the Chesapeake Bay Bridge and I believed the erratic behavior of the steering was to dangerous to change driving. I rented a replacement van to ensure her safety. The problem was recreated by the Dealership and the estimate to replace everything involving the steering system was provided as the fix. I have the steering assembly at my home but no one has opened or inspected what components failed. This failure appeared around 81,000 miles on our 2017 Chrysler Pacifica Limited. I have owned 5 Chrysler products and have never had a rack steering assembly fail even with most of our vehicles exceeding 200,000 miles.