The factory-installed Uconnect infotainment system in my 2019 Dodge Challenger intermittently malfunctions by remaining stuck on the rearview camera display after the vehicle is shifted out of reverse and into drive or park. The rearview camera image does not disengage as designed and continues to display randomly during normal forward driving. This appears to be a failure of the Uconnect radio/software system rather than the camera itself. The issue occurs unpredictably and has happened multiple times without warning. Restarting the vehicle is sometimes required to restore normal screen function. This malfunction creates a safety hazard because the display obstructs access to navigation, climate controls, and other critical vehicle information while driving forward, causing driver distraction and reduced situational awareness. Backup cameras are federally mandated safety equipment, and failure of the system to disengage properly interferes with safe vehicle operation. Additionally, I am medically light-sensitive due to chronic migraines. When the rearview camera display remains active unexpectedly, the bright and high-contrast screen significantly worsens my symptoms, increasing pain, visual discomfort, and distraction while driving. This exacerbates the safety risk and makes the malfunction an extreme concern for me during vehicle operation. No warning lights or messages appear prior to or during the malfunction. The problem has not yet been repaired. The vehicle and system remain available for inspection upon request. This failure mode matches known Dodge/Stellantis rearview camera and Uconnect software defects reported on similar model-year vehicles, although my VIN is not currently included in an active recall.
2019 Dodge Challenger: backup camera failure
6 of the 59 complaints about the 2019 Dodge Challenger describe backup camera failure.
- owner complaints
- 6
- of this car's complaints
- 10%
- recalls
- 1
Backup camera failure by model year
- 20233
- 20212
- 20196
- 20184
- 20174
- 20163
- 20153
What owners say
The vehicle's Uconnect system (which is required for most all functions including backup camera) will intermittently go black and become unresponsive. Soft and hard resets do not resolve it at first. Hard reset eventually resulted in a generic screen with numerous functions missing. Eventually after several hours the correct screen restored itself. This happens intermittently and there are hundreds of reports of this online (search for Uconnect screen black).
There is a loud popping sound when I start my car. It sounds as if the car is back firing. The sound has been duplicated several times. The sound does not happen every time, but it has happened well over 100 times. I have taken it into the dealership, and they claim that the sound can never be duplicated. Also, when I place my car in reverse and then drive the backup camera screen remains on in after driving forward for more than 30 seconds. This is VERY hazardous because when looking at the screen i can still see what is behind me which is a huge distraction.
Back up camera goes out (turns gray/ fizzes out) occasionally and stays on when car is in drive
Rear camera is dark and cloudy hard to see impossable at night
When car is in reverse, backup camera is unavailable jeopardizing safety around. During acceleration of car when driving, the speedometer on dash shows different than the digital speedometer. I.e if I am going 40 the digital shows 60+ (varies). Passenger door lock has difficulty clicking lock/unlock and no child lock is on- will be safety concern if exiting is needed of vehicle. All issues above happen almost every time.
Service bulletins that may apply
- Active Diagnostic Trouble Code (DTC) B1A10-00, B1A11-00, B1A12- 00, B1A13-00-, B1A14-00, B1A15-00,...
- Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC)...
- Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC)...
- Verify "Z" part number availability
- Decreased Remote Start And RKE Range
- Washer Light On And Will Not Turn Off After Adding Washer Solvent."
- Switch and bezel - front door
- Backup Camera Poor Image Quality Inspection
Related recalls
Electrical system: instrument cluster/panel
- What is wrong
- Chrysler (FCA US LLC) is recalling certain 2019 Dodge Challenger and Charger and Chrysler 300 vehicles. The instrument cluster may not properly illuminate driver warnings. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 101, "Control and Displays."
- Risk
- Failure of the instrument cluster to properly illuminate may prevent the driver from receiving warnings about the vehicle's systems, increasing the risk of crash.
- Remedy
- Chrysler has notified owners, and dealers will update the instrument cluster software, free of charge. The recall began April 8, 2019. Owners may contact Chrysler customer service at 1‑800‑853‑1403. Chrysler's number for this recall is V32.
Recall number 19V203000 · Recall details
Questions about the 2019 Dodge Challenger backup camera
Is backup camera failure a common problem on the 2019 Dodge Challenger?
6 of 59 owner complaints about the 2019 Dodge Challenger (10%) mention backup camera failure. The model year with the most reports is 2019.
Is there a recall or service bulletin for this on the 2019 Dodge Challenger?
There is 1 recall and 66 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 2019 Dodge Challenger
VIN decoder
See the problems and recalls for an exact car
Buying a used 2019 Dodge Challenger?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history